IMA ADVANTAGE 400

GENERAL SPECIFICATIONS ► Max. working panel height with straight edge 60 mm ► Applicable banding material in coils: thin edge and PVC up to 3 mm ► Applicable banding material in strips: solid wood up to 12 mm SYSTEM AND OPTIONALS OF THE PANEL HANDLING ► Running driving chain ► Top pression unit made by lines of idle wheels ► Top pression unit made by motorized rubbered belt ► Top pression unit with adjustable height ► Adjusting in continuos feeding speed 4 - 20 m/min ► Input panel guide ► Lateral bar with lines of idle wheels to support the panels WORKING UNITS ON THE SQUARING SIDE ► Anti-gluing unit made by 2 guns that spray liquid on the top and bottom part of the panel ► Pre milling unit to rectify the side of the panel. It is made by 2 motors with automatic in/out intervention to avoid splinters on the panel - motors power 3 KW ( 12000 RPM) GLUING UNIT, INSERTION AND PRESSION OF THE EDGE ► Lamp zone to pre-heat the side of the panel ► Support for edge coil ► Hot-melt glue pot ► Spreading roller to regulate the quantity of apllied glue ► Guillotine …

GENERAL CHARACTERISTICS ► Applicable banding material in coils: thin edge and PVC up to 3 mm SYSTEM AND PANEL HANDLING OPTIONS ► of Running driving chain ► Top pression unit made by lines of idle wheels ► Top pression adjustable in height ► Input panel guide ► Lateral bar with lines of idle routine panels support UNITS ON THE SQUARING ► Pre milling unit to rectify the side of the panel. E 'consists of 2 motors with automatic in intervention to avoid splinters on the panel - motors power 3 KW 12000 (r / min) GLUING UNIT, INSERTION AND PRESSION OF THE EDGE ► Lamp zone to pre-heat the edge of the panel ► Plate reel holder ► Hot-melt glue ► Spreading roller to regulate the quantity of glue applied ► Guillotine to cut the edge in coils ► Roller set to press the edge on straight profiles - nr. 1 + 5 pressure rollers UNITS ON THE EDGE BANDING ► cutting unit with 2 motors to cut the excess edge on the front and rear of the panel. - Motors tiltable 0/10 degree - motors power 0.66 KW 11100 (r / min) ► trimming unit superposed ► Rounding unit …

For edge banding and finishing of rectangular and square shaped panels General Specifications: - Veneer/plastic strips cut to length & veneer/plastic tape from a coil, & Lipping’s materials - 14 mm min. & 55 mm max. strip height capacity - 0.4 mm min. & 12 mm max. strip thickness capacity - (12 x 45 mm) solid wood & (3 x 50 mm) PVC max. cross-section of edging material - 150 mm min. length x 80 mm min. width x 10 mm min. thickness capacities - 35 mm panel overhang plus edge thickness - 8 Bar pneumatic requirement Machine Configuration: - (1) #08.376 double-jointing unit, (jump type, non-swivel, & non-tracing) - (1) 1.5 KW, 300 mm long Infra-red panel edge pre-heating zone - (1) #283.20 pre-melt glue container with (3) x 250 KW controlled heaters - (1) #283.1511 edge-banding unit with #283.08 glue applicator - (1) Single coil/strip/lipping magazine, (860 mm max. diam. coil) - (1) #.08.

Edge banding machine with pre-milling of the board Manufacturer: IMA Type: Advantage 400 Year: 2011