Homag KL 79/A20/S2

GENERAL CHARACTERISTICS ► Industrial machine with robust construction ► max height. working panel height with straight edge 60 mm ► Applicable banding material in coils: thin edge and PVC up to 3 mm ► Applicable banding material in strips: solid wood up to 20 mm SYSTEM AND PANEL HANDLING OPTIONS ► of Running driving chain ► Top pression unit made by motorized rubbered belt ► Top pression adjustable in height by the control automatically ► Variable speed continuous feed ► Input panel guide ► Lateral bar with lines of idle routine panels support UNITS ON THE SQUARING ► Pre milling unit to rectify the side of the panel. E 'consists of 2 motors with automatic in intervention to avoid splinters on the panel - motors power 3 KW 9000 (r / min) GLUING UNIT, INSERTION AND PRESSION OF THE EDGE ► Lamp zone to pre-heat the edge of the panel ► Plate reel holder ► Hot-melt glue and premelter ► Spreading roller to regulate the quantity of glue applied ► Guillotine to cut the edge in coils ► Roller set to press the edge on straight profiles - nr. 1 + 6 pressure rollers UNITS ON THE EDGE BANDING ► …

Technical Details / Technical Details: MANUFACTURER / MANUFACTURER: HOMAG YEAR / YEAR: 1998 Condition / Conditions: Good working Condition / Ready to work Available / Availability: YES / SI Type / Type. OPTIMAT KL 79 / A20 / S2 .- Infinitely variable feeding 18-24 m / min. .- Working height 950 mm. .- Minimum working width: width of the workpiece 55mm with thickness up to 22 mm Workpiece width 100mm with thickness up to 60 mm (depending on the Length) .- Overhang of the work piece: 30 mm .- Thickness of the workpiece: 10-60 mm .- Material Wooden Strips Material: Strips of maximum 0.4 to 20 mm Cross section of Strips maximum 900 mm2 .- Material Cantos Rollo: Edge thickness 0.3-3 mm Cross section: Maximum PVC edge 135 mm2 Singing Sheet max 100 mm2 .- Roll diameter of 900 mm **************** .- Feed infinitely variable 18 - 24 m / min. .- Working height 950 mm .- Minimum working width: 55 mm workpiece thickness 22 mm 100 mm workpiece thickness 60 mm (depending on the Workpiece- Length) .- Workpiece projection 30 mm .- Workpiece thickness 10-60 mm .- Edgematerial Wood Strips Maximum 0.4-20 mm Edge querschnitt Strips up to 900 …