| Clamping force | 250 T |
|---|---|
| Tie bar spacing (H) | 685 mm |
| Shot weight | 679 g |
| Platen length | 1005 mm |
| Bi-metal screw | No |
| Robot interface | |
| Number of heating zones | 6 |
| Mould size | 280-700 |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 735 mm |
| Pressure on material | 998 bar |
| Platen width | 950 mm |
| Equipped with robot | No |
| Number of cores | 4 |
| Opening of the press | 550 mm |
Croatia
2004
| Clamping force | 175 T |
|---|---|
| Mould size |
| Robot interface |
|---|
Czech Republic
2015
| Clamping force | 350 T |
|---|---|
| Pressure on material | 196 bar |
| Platen width | 1090 mm |
| Robot interface |
| Screw diameter | 65 mm |
|---|---|
| Platen length | 1090 mm |
| Equipped with robot | Yes |
| Mould size |
| Clamping force | 130 T |
|---|---|
| Tie bar spacing (H) | 420 mm |
| Shot volume | 139 cm³ |
| Pressure on material | 2500 bar |
| Platen width | 615 mm |
| Equipped with robot | No |
| Number of cores | 1 |
| Mould size | 420 x 615 |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 420 mm |
| Shot weight | 117 g |
| Platen length | 615 mm |
| Bi-metal screw | Yes |
| Robot interface | euromap 12 |
| Opening of the press | 500 mm |
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 560 mm |
| Shot volume | 442 cm³ |
| Platen length | 830 mm |
| Bi-metal screw | Yes |
| Robot interface | |
| Opening of the press | 575 mm |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 560 mm |
| Pressure on material | 1940 bar |
| Platen width | 830 mm |
| Equipped with robot | No |
| Number of cores | 2 |
| Mould size |
| Clamping force | 80 T |
|---|---|
| Tie bar spacing (H) | 670 mm |
| Shot volume | 49 cm³ |
| Bi-metal screw | Yes |
| Robot interface | si |
| Number of heating zones | 2 |
| Screw diameter | 25 mm |
|---|---|
| Tie bar spacing (V) | 600 mm |
| Pressure on material | 1550 bar |
| Equipped with robot | Yes |
| Number of cores | 2 |
| Mould size |
| Clamping force | 250 T |
|---|---|
| Tie bar spacing (H) | 630 mm |
| Shot volume | 664 cm³ |
| Pressure on material | 2000 bar |
| Platen width | 900 mm |
| Equipped with robot | No |
| Number of cores | 2 |
| Opening of the press | 1300 mm |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 630 mm |
| Shot weight | 607 g |
| Platen length | 900 mm |
| Bi-metal screw | Yes |
| Robot interface | SI |
| Number of heating zones | 4 |
| Mould size | 630 X630X900 |
Czech Republic
2015
| Clamping force | 250 T |
|---|---|
| Tie bar spacing (H) | 580 mm |
| Shot volume | 651 cm³ |
| Pressure on material | 155 bar |
| Platen width | 850 mm |
| Equipped with robot | Yes |
| Number of cores | 2 |
| Opening of the press | 1150 mm |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 580 mm |
| Shot weight | 715 g |
| Platen length | 850 mm |
| Bi-metal screw | No |
| Robot interface | ANO |
| Number of heating zones | 4 |
| Mould size | 600mm |
| Clamping force | 400 T |
|---|---|
| Tie bar spacing (H) | 1200 mm |
| Shot volume | 2480 cm³ |
| Pressure on material | 1600 bar |
| Platen width | 1100 mm |
| Equipped with robot | Yes |
| Number of cores | 4 |
| Opening of the press | 1000 mm |
| Screw diameter | 90 mm |
|---|---|
| Tie bar spacing (V) | 1100 mm |
| Shot weight | 2281 g |
| Platen length | 1200 mm |
| Bi-metal screw | Yes |
| Robot interface | Euromap 67 |
| Number of heating zones | 4 |
| Mould size | 450 |
| Clamping force | 420 T |
|---|---|
| Tie bar spacing (H) | 920 mm |
| Shot volume | 1709 cm³ |
| Platen length | 1350 mm |
| Robot interface | |
| Opening of the press | 700 mm |
| Screw diameter | 80 mm |
|---|---|
| Tie bar spacing (V) | 920 mm |
| Pressure on material | 1950 bar |
| Platen width | 1350 mm |
| Number of heating zones | 6 |
| Mould size | 350 x 750 |
| Clamping force | 350 T |
|---|---|
| Tie bar spacing (H) | 810 mm |
| Shot volume | 1212 cm³ |
| Pressure on material | 1877 bar |
| Platen width | 1100 mm |
| Equipped with robot | Yes |
| Number of cores | 2 |
| Mould size | 380 |
| Screw diameter | 70 mm |
|---|---|
| Tie bar spacing (V) | 710 mm |
| Shot weight | 1090 g |
| Platen length | 1200 mm |
| Bi-metal screw | No |
| Robot interface | Euromap E 67 |
| Opening of the press | 710 mm |
France
2006
| Clamping force | 150 T |
|---|---|
| Tie bar spacing (H) | 470 mm |
| Shot volume | 392 cm³ |
| Pressure on material | 2000 bar |
| Platen width | 650 mm |
| Equipped with robot | No |
| Number of cores | 1 |
| Mould size | 250/750 |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 470 mm |
| Shot weight | 359 g |
| Platen length | 650 mm |
| Bi-metal screw | No |
| Robot interface | Euromap E 67 |
| Opening of the press | 750 mm |
France
1999
| Clamping force | 550 T |
|---|---|
| Tie bar spacing (H) | 930 mm |
| Shot volume | 2128 cm³ |
| Platen length | 1350 mm |
| Bi-metal screw | Yes |
| Robot interface | oui |
| Number of heating zones | 24 |
| Mould size |
| Screw diameter | 85 mm |
|---|---|
| Tie bar spacing (V) | 930 mm |
| Pressure on material | 1418 bar |
| Platen width | 1350 mm |
| Equipped with robot | Yes |
| Number of cores | 3 |
| Opening of the press | 1100 mm |
| Clamping force | 430 T |
|---|---|
| Tie bar spacing (H) | 820 mm |
| Shot volume | 1433 cm³ |
| Pressure on material | 1395 bar |
| Platen width | 1180 mm |
| Equipped with robot | No |
| Number of cores | 2 |
| Opening of the press | 950 mm |
| Screw diameter | 80 mm |
|---|---|
| Tie bar spacing (V) | 820 mm |
| Shot weight | g |
| Platen length | 1180 mm |
| Bi-metal screw | Yes |
| Robot interface | OUI |
| Number of heating zones | 8 |
| Mould size |
| Clamping force | 800 T |
|---|---|
| Tie bar spacing (H) | 1170 mm |
| Shot volume | 735 cm³ |
| Robot interface | Euromap 1350/800 |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 1000 mm |
| Equipped with robot | Yes |
| Mould size | 250 - 900 |
| Clamping force | 400 T |
|---|---|
| Tie bar spacing (H) | 700 mm |
| Shot volume | 1458 cm³ |
| Pressure on material | 1673 bar |
| Platen width | 1085 mm |
| Robot interface | |
| Opening of the press | 1500 mm |
| Screw diameter | 75 mm |
|---|---|
| Tie bar spacing (V) | 700 mm |
| Shot weight | 1351 g |
| Platen length | 1085 mm |
| Equipped with robot | Yes |
| Number of heating zones | 6 |
| Mould size | 250 - 850 |
| Clamping force | 110 T |
|---|---|
| Tie bar spacing (H) | 470 mm |
| Shot volume | 393 cm³ |
| Platen length | 745 mm |
| Bi-metal screw | Yes |
| Robot interface | |
| Opening of the press | 600 mm |
| Screw diameter | 70 mm |
|---|---|
| Tie bar spacing (V) | 470 mm |
| Pressure on material | 1898 bar |
| Platen width | 745 mm |
| Equipped with robot | Yes |
| Number of cores | 2 |
| Mould size |
| Clamping force | 320 T |
|---|---|
| Tie bar spacing (H) | 650 mm |
| Shot volume | 544 cm³ |
| Platen length | 980 mm |
| Bi-metal screw | No |
| Robot interface | EUROMAP 12 |
| Mould size |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 649 mm |
| Pressure on material | 2400 bar |
| Platen width | 980 mm |
| Equipped with robot | Yes |
| Opening of the press | 730 mm |
| Clamping force | 280 T |
|---|---|
| Tie bar spacing (H) | 630 mm |
| Shot volume | 769 cm³ |
| Pressure on material | 2420 bar |
| Platen width | 1050 mm |
| Robot interface |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 630 mm |
| Shot weight | 700 g |
| Platen length | 995 mm |
| Equipped with robot | Yes |
| Mould size |
| Clamping force | 150 T |
|---|---|
| Tie bar spacing (H) | 500 mm |
| Shot volume | 377 cm³ |
| Pressure on material | 1892 bar |
| Platen width | 790 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 500 mm |
| Shot weight | 343 g |
| Platen length | 780 mm |
| Equipped with robot | Yes |
| Number of heating zones | 5 |
Romania
2001
| Clamping force | 160 T |
|---|---|
| Tie bar spacing (H) | 510 mm |
| Shot volume | 360 cm³ |
| Platen width | 780 mm |
| Robot interface | wittmann w160129/2017 |
| Opening of the press | 1010 mm |
| Screw diameter | 45 mm |
|---|---|
| Tie bar spacing (V) | 450 mm |
| Platen length | 730 mm |
| Equipped with robot | Yes |
| Number of cores | 2 |
| Mould size |
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 570 mm |
| Shot volume | 392.115 cm³ |
| Pressure on material | 1999.1 bar |
| Platen width | 794 mm |
| Number of cores | 1 |
| Mould size | 250-550 |
| Screw diameter | 50.35 mm |
|---|---|
| Tie bar spacing (V) | 570 mm |
| Shot weight | 359.105 g |
| Platen length | 795 mm |
| Robot interface | |
| Opening of the press | 450 mm |
| Clamping force | 1000 T |
|---|---|
| Tie bar spacing (H) | 1400 mm |
| Shot volume | 5453 cm³ |
| Pressure on material | 1482 bar |
| Platen width | 1710 mm |
| Equipped with robot | Yes |
| Number of cores | 4 |
| Opening of the press | 1900 mm |
| Screw diameter | 115 mm |
|---|---|
| Tie bar spacing (V) | 1150 mm |
| Shot weight | 4962 g |
| Platen length | 1960 mm |
| Bi-metal screw | Yes |
| Robot interface | EUROMAP 67 |
| Number of heating zones | 7 |
| Mould size | 500 - 1200 MM |
| Clamping force | 130 T |
|---|---|
| Tie bar spacing (H) | 370 mm |
| Shot volume | 202 cm³ |
| Platen length | 565 mm |
| Bi-metal screw | Yes |
| Robot interface | |
| Number of heating zones | 5 |
| Mould size | 150 |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 370 mm |
| Shot weight | 184 g |
| Platen width | 565 mm |
| Equipped with robot | No |
| Number of cores | 2 |
| Opening of the press | 370 mm |
| Clamping force | 400 T |
|---|---|
| Tie bar spacing (H) | 1200 mm |
| Shot volume | 1193 cm³ |
| Pressure on material | 2050 bar |
| Platen width | 1100 mm |
| Equipped with robot | Yes |
| Number of cores | 5 |
| Opening of the press | 1000 mm |
| Screw diameter | 55 mm |
|---|---|
| Tie bar spacing (V) | 1100 mm |
| Shot weight | 1000 g |
| Platen length | 1300 mm |
| Bi-metal screw | Yes |
| Robot interface | |
| Number of heating zones | 18 |
| Mould size |
| Clamping force | 500 T |
|---|---|
| Tie bar spacing (H) | 1500 mm |
| Shot volume | 5430 cm³ |
| Platen length | 1500 mm |
| Bi-metal screw | Yes |
| Robot interface | |
| Opening of the press | 1100 mm |
| Screw diameter | 120 mm |
|---|---|
| Tie bar spacing (V) | 1285 mm |
| Pressure on material | 1600 bar |
| Platen width | 1285 mm |
| Equipped with robot | No |
| Number of cores | 3 |
| Mould size |
France
2014
| Clamping force | 100 T |
|---|---|
| Tie bar spacing (H) | 470 mm |
| Shot volume | 85 cm³ |
| Platen length | 637 mm |
| Bi-metal screw | Yes |
| Robot interface | |
| Number of heating zones | 8 |
| Mould size |
| Screw diameter | 30 mm |
|---|---|
| Tie bar spacing (V) | 470 mm |
| Pressure on material | 2000 bar |
| Platen width | 637 mm |
| Equipped with robot | Yes |
| Number of cores | 1 |
| Opening of the press | 350 mm |
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 570 mm |
| Shot volume | 318 cm³ |
| Platen length | 795 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 45 mm |
|---|---|
| Tie bar spacing (V) | 570 mm |
| Pressure on material | 2470 bar |
| Platen width | 795 mm |
| Opening of the press | 450 mm |
Poland
2006
| Clamping force | 100 T |
|---|---|
| Tie bar spacing (H) | 420 mm |
| Shot volume | 188 cm³ |
| Pressure on material | 1530 bar |
| Platen width | 569 mm |
| Equipped with robot | Yes |
| Number of cores | 1 |
| Mould size | 250 |
| Screw diameter | 40 mm |
|---|---|
| Tie bar spacing (V) | 420 mm |
| Shot weight | 171 g |
| Platen length | 570 mm |
| Bi-metal screw | Yes |
| Robot interface | Euro 67 |
| Opening of the press | 500 mm |
France
2011
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 880 mm |
| Shot volume | 318 cm³ |
| Platen length | 880 mm |
| Bi-metal screw | Yes |
| Robot interface | |
| Opening of the press | 750 mm |
| Screw diameter | 45 mm |
|---|---|
| Tie bar spacing (V) | 830 mm |
| Pressure on material | 2400 bar |
| Platen width | 830 mm |
| Equipped with robot | Yes |
| Number of cores | 1 |
| Mould size |
| Clamping force | 150 T |
| Screw diameter | 44 mm |
| Tie bar spacing (H) | mm |
| Tie bar spacing (V) | mm |
| Shot volume | 267 cm³ |
| Shot weight | 245 g |
| Pressure on material | 1500 bar |
| Platen length | mm |
| Platen width | mm |
| Number of cores | |
| Number of heating zones | |
| Opening of the press | 440 mm |
| Mould size | 200x490 |
| ------------------- | |
| Length x width x height | 5200.0 × 2000.0 × 1300.0 |
| Weight | 6900 kg |
South Korea
2004
| Clamping force | 100 T |
|---|
| Screw diameter | 28 mm |
|---|
| Clamping force | 100 T |
|---|---|
| Tie bar spacing (H) | 410 mm |
| Shot weight | 48 g |
| Screw diameter | 26 mm |
|---|---|
| Tie bar spacing (V) | 410 mm |
| Opening of the press | 800 mm |
Singapore
2004
| Clamping force | 150 T |
|---|---|
| Mould size |
| Robot interface |
|---|
Italy
Spain
Malta
Taiwan
China
Hong Kong
EN
- Languages
English (GB)
English (US)
Français
Čeština
Español
Deutsch
Italiano
Polski
Русский
Türkçe
Português
Magyar
Hrvatski
Български
Nederlands
Ελληνικά
Dansk
Svenska
Română
Crpski
Lietuvių