Daewoo PUMA 8 S

Manufacturer Daewoo
Model PUMA 8 S
Category Lathes - cnc lathes

Here is a selection of similar machines

Turning length 356 mm
Turning Ø 180 mm
Ø above the bed 450 mm
Ø above transversing slide 360 mm
Length between centers 370 mm
Type of CNC FANUC 0-T
Spindle taper A2-6
Spindle bore 55.9 mm
Turning speed 4000 rpm
Tailstock no
Bar feeder no
-------------------
Length x width x height 3149.6 × 1930.4 × 1828.8
Weight 4000 kg

Here is a selection of similar machines


Similar machines sold on Exapro

CNC Lathe Daewoo Puma 8 S
CNC Lathe Daewoo Puma 8 S Sold

Year:

Machine Type CNC Machine Machine MFG Daewoo Puma Machine Model 8 S Sub Type 1 Lathe - CNC Sub Type 2 2” Specifications MAXIMUM SWING OVER BED 19.7" SWING OVER CARRIAGE 12.2" MAXIMUM TURNING DIAMETER 14.1" MAXIMUM TURNING LENGTH 14.6" X AXIS TRAVEl 7.9" Z AXIS TRAVEL 15.0" RAPID TRAVERSE RATE X AXIS 787 IPM RAPID TRAVERSE RATE Z AXIS 945 IPM SPINDLE BORE 2.4" MAXIMUM BAR CAPACITY 2" SPINDLE SPEEDS 50 - 5,000 RPM SPINDLE MOTOR 20 HP TURRET …

Price on request

US USA


CNC Lathe Machine Daewoo Puma 8 S
CNC Lathe Machine Daewoo Puma 8 S Sold

Year: 1996

Machine Type CNC Machine Machine MFG Daewoo Puma Machine Model 8 S Sub Type 1 Lathe - CNC Sub Type 2 50mm Specifications PUMA 8 - 2SP, 300mm swing, 310mm between spindles Age : 1996 Description : Spindle Nose: A2-6 Spindle Bore: 60 mm Speed Range: 30-3600 RPM Spindle Motor: 20/15 HP Rapid Traverse: 630 IPM Turret Stations: V8 + V8 Tool Size OD/ID: 25 /40 mm Specs : Maximum Swing: 300 mm Distance Between Spindles: 310 mm Maximum Turninf …

Price on request

US USA


Used Daewoo Puma 8. Cnc Turning Center, w/ Fanuc OT CNC Control
Used Daewoo Puma 8. Cnc Turning Center, w/ Fanuc OT CNC Control Sold

Year: 1990

Specifications Swing Over Bed Max. 17.72 in Swing Over Carriage 9.84 in Max. Cutting Diameter 8.2 in Max. Machining Length 14 in Bar Capacity 1.77 in Rapid Traverse Rate (X) 236 in/min Rapid Traverse Rate (Z) 472 in/min Turret Tool Positions 12 (6 ID & 6 OD) Cross Turret Travel (X) Max. 4.9 in Longitudinal Turret Travel (Z) Max. 15 in Spindle Drive Motor 15/20 HP Equipped With: Fanuc OT CNC Control 8" 3 Jaw Hydraulic Chuck Hydraulic Tailstock Coolant …

Price on request

US USA


Used DAEWOO PUMA 8-S. Cnc Turning Center, w/ Fanuc 0T Cnc Control
Used DAEWOO PUMA 8-S. Cnc Turning Center, w/ Fanuc 0T Cnc Control Sold

Year: 1995

SPECIFICATIONS: SWING OVER CARRIAGE: 12.2" X AXIS TRAVEL: 7.9" Z AXIS TRAVEL: 15.0" RAPID TRAVERSE RATE X AXIS: 787 IPM RAPID TRAVERSE RATE Z AXIS: 945 IPM MAXIMUM BAR CAPACITY: 2" SPINDLE MOTOR: 20 HP TURRET CAPACITY: 10 TAILSTOCK QUILL TAPER: MT #4 TAILSTOCK QUILL DIAMETER: 2.6" TAILSTOCK QUILL STROKE: 3.9" *FANUC 0T CNC CONTROL *RS-232C PORT INTERFACE FOR DNC OPERATION *8" 3-JAW HYDRAULIC CHUCK *TAILSTOCK *CHIP CONVEYOR Make an Offer

Price on request

US USA


Used DAEWOO PUMA 8S. Cnc Lathe, w/ Fanuc OT Control
Used DAEWOO PUMA 8S. Cnc Lathe, w/ Fanuc OT Control Sold

Year: 1996

MACHINE SPECS: CONTROL: FANUC MAXIMUM SWING: 19.7" TURN DIAMETER: 14.6" MACHINING LENGTH: 14.6" BAR CAPACITY: 2" CHUCK SIZE: 8" MAIN MOTOR: 20HP TURRET POSITION: 12 LIVE TOOLING/MILLING: NO EQUIPPED WITH: Fanuc OT Control 8” Kitagawa Chuck Heavy Box Way Lathe 12 Position Turret Tailstock All Available Tooling

Price on request

US USA


DAEWOO PUMA 8S
DAEWOO PUMA 8S Sold

Year: 1997

Spindle Speed 4000RPM Spindle Motor 25HP X Axis Travel 8.3" Z Axis Travel 21.7" Turret Tools 12 Stations Max Turning Dia 14.6" Max Turning Length 20.7" Max Swing 19.7" Control Mitsubishi Dimensions 114"x76"x77" Weight 11000 lbs

Price on request

MX Mexico


Used DAEWOO, Model PUMA 8-S. SLANT BED CNC TURNING CENTER, w/ Fanuc OT-C Control
Used DAEWOO, Model PUMA 8-S. SLANT BED CNC TURNING CENTER, w/ Fanuc OT-C Control Sold

Year: 1997

Specifications MAX. SWING OVER CARRIAGE 12.2” MAX. BAR CAPACITY 2” RAPID TRAVERSE RATE X-AXIS 787 IPM RAPID TRAVERSE RATE Z-AXIS 945 IPM X-AXIS TRAVEL 7.9” Z-AXIS TRAVEL 15” TAILSTOCK QUILL TAPER NO.4 M.T. TAILSTOCK QUILL DIAMETER 2.6” TAILSTOCK QUILL STROKE 3.9” ****EQUIPPED WITH: 8” DIA. 3-JAW POWER CHUCK PROGRAMMABLE TAILSTOCK 10-STATION TURRET TOOL EYE AUTOMATIC CHIP CONVEYOR FLOOD COOLANT 20 HP SPINDLE DRIVE FANUC OT-C CONTROL WITH 9” CRT SCREEN AND RS-232C PORT 3/60/220 VOLT

Price on request

US USA


DAEWOO PUMA 8 CNC lathe
DAEWOO PUMA 8 CNC lathe Sold

Year:

DAEWOO CNC Lathe. Model PUMA 8. CNC FANUC 6T. Distance between centers 381 mm. Swing over bed 450 mm. Swing over transversal slide 250 mm. Swing Ø 180 mm. Max. cutting length 356 mm. Height from floor to centers 110 mm. Height of the centers on the bed 225 mm. Spindle diameter 75 mm. Spindle bore diameter 57 mm. Spindle bore taper MT#6. Spindle travel 80 mm. Spindle nose ASA A2#6. Spindle speeds, from 40 to 4.000 rpm. Longitudinal travel …

Price on request

ES Spain

Are you looking for this machine?

Contact us