Machine's specifications - Daewoo PUMA 350 Used machines

Manufacturer	Daewoo
Model	PUMA 350
Category	Lathes - cnc lathes

Used DAEWOO PUMA 350A. Cnc Lathe, w/ Fanuc 18T Cnc Control Sold

Year: 1998

Specification SWING OVER BED 27.5" SWING OVER CARRIAGE 18.9" X AXIS TRAVEL 14.3" Z AXIS TRAVEL 43.5" RAPID TRAVERSE RATE X/Z AXES 630/790 IPM MAX. BAR STOCK DIAMETER 3.58" SPINDLE MOTOR 35 HP TURRET CAPACITY 12 POSITIONS TAILSTOCK TAPER MT #5 TAILSTOCK QUILL TRAVEL 4.7" Equipped With: FANUC 18T CNC CONTROL WITH 10.4" LCD SCREEN RS-232 PORT INTERFACE FOR DNC OPERATION 12" 3-JAW CHUCK HYDRAULIC THRU HOLE CHUCK PROGRAMMABLE TAILSTOCK, BUILT IN CENTER FULLY ENCLOSED SPLASH & SAFETY GUARDING ALL …

Price on request

USA

DAEWOO PUMA 350M CNC LATHE 3 Axis Sold

Year:

Tool Setting Arm Swarf Conveyor. Tailstock 4" Spindle Bore Turning Capacity 18" x 41" 15" Diameter Kitigawa 3 Jaw Chuck : 12 Station Turret 6 Stations for Live Holders C - Axis

Price on request

United Kingdom

DAEWOO PUMA 350B Cnc lathe Sold

Year: 2001

Price on request

Italy

DAEWOO PUMA 350B Cnc lathe Sold

Year: 1999

DAEWOO PUMA 350B of 1999, the machine is equipped with high-pressure pump and preparation steady rest steady rest not included)

Price on request

Italy

DAEWOO PUMA 350 Cnc lathe Sold

Year: 2000

LATHE DAEWOO PUMA 350 YEAR 2000 CNC FANUC 18 MAX 700 MM DIAMETER ROTATING ON BENCH MAX 480 MM DIAMETER ROTATING ON THE WAGON MAC TURNING DIAMETER 400 MM MAX LENGTH FROM TURNING AUTOCENTR 1500 MM MAX TURNING BAR DIAM 90 MM CHUCK DIAMETER 305 MM 102 MM DIAMETER HOLE SPINDLE SPINDLE NOSE 8 "ASA2 INT BEARING 160MM DIAM ANT SPEED 'SPINDLE SPEED MIN 30, 3000 SLOPE BENCH WAGON 45 ° X-AXIS STROKE 362 MM Z-AXIS TRAVEL 1105 MM QUICK …

Price on request

Italy

DAEWOO PUMA 350 B Cnc lathe Sold

Year: 1999

DESCRIZIONE Capacità Max diametro rotante sul banco mm 700 Max diametro rotante sul carro Ílln 480 Max diametro tornibile mm 400

Price on request

Italy

Used Daewoo Puma 350LB Cnc lathe Sold

Year: 2006

Year: 1998 Make: Daewoo Model: Puma 240MB Bar Capacity: 65mm Chuck Size: 250mm Control: FANUC 21i-T Maximum Cutting diameter: 350mm Maximum Cutting Length: 562mm Rapid Feedrates: XZ: 24 x 30m/minute Spindle Motor Power: 18.5kW Spindle Speed: 4500rpm Swing: 550mm Swing Over Carriage: 390mm Turret Positions: 12 Station Description: C axis & Milling, Swarf conveyor, Tool setter, Coolant, Tailstock, Interlocked guards, Low Volt Light, 3 Jaw Chuck, Manuals, Tooling, C axis

Price on request

United Kingdom

Daewoo PUMA 350LM cnc lathe Sold

Year:

Cabinet FANUC 18 itb conversational CAP 2 Bore 700mm max Turning diameter max 550mm Turning length 2100mm Chuck diameter 300 mm Spindle speed 3000t / mn Spindle motor 22 / 30kw 80 mm bar passage 12 positions VDI turret with 50 motorized tools C axis Chip conveyor self-centering telescope 2 radial rotary PO 2 axial rotary PO measuring arm tools

Price on request

France

Daewoo Puma 350 MA cnc lathe Sold

Year: 2000

Max rotating Ø 700 mm on the bench max rotating Ø on the slide 480 mm max turnable length 460 mm max turnable length from self centering device 1050 mm max turnable Ø from the bar 90 mm max turnable Ø with motorized tools 25 mm max threading Ø with motorized tools size M20. Self-centering spindle 304 mm spindle Ø 102 mm spindle nose cod. ASA 2 8" fore bearing 360 mm spindle rotary speed between 30 and 3000 RPM …

Price on request

Poland

Daewoo PUMA 350 cnc lathe Sold

Year: 2000

Tool setter, Coolant, Tailstock, Interlocked guards, Low Volt Light, 3 Jaw Chuck, Fixed Steady, Manuals, Swarf Conveyor Control FANUC 18T Swing 700mm Swing Over Carriage 480mm Bar Capacity 91mm Chuck Size 381mm Maximum Cutting diameter 550mm Maximum Cutting Length 1050mm Turret Positions 12 Station Rapid Feedrates XZ: 16 x 20m/minute Spindle Diameter 26kW Spindle Nose A2-8 Spindle Speed 3000rpm X axis Travel 362mm Z axis Travel 1105mm Machine Dimensions 4890 x 2390 x 2240mm Machine Weight 9000kg

Price on request

United Kingdom

DAEWOO PUMA 350 A Cnc lathe Sold

Year: 1999

Diameter of the plate:700mm Maximum Turning diameter:550mm Maximum turning lenght: 1050mm Spindle bore diameter:102mm Spindle nose:A2#8ASA Maximum bar diameter:91mm Main Spindle speed:3000 rpm Feeds range:16000/20000mm/min Turret type:12 pos Main motor:29 HP CNC control:Fanuc 18T

Price on request

Spain

Used DAEWOO PUMA 350. Cnc Lathe, w/ FANUC 21 iT Control Sold

Year: 1999

EQUIPPED WITH: Control: FANUC 21 iT Chuck Size 12" swing dia. 27.55" standard turning diameter 17.71" bar material dia. 3.54" travel -x axis 14.17" travel -z axis 43.5" spindle drive 40 hp turret stations 12 total power requirement 42,2 kVA weight of the machine ca. 10,2 t dimensions of the machine 5,1 x 2,2 x 2,2 m Accessories Chip conveyor

Price on request

USA

Daewoo Puma 350B Sold

Year: 1999

Fanuc 18-T, 380mm power chuck, toolsetter, 10 station turret, speeds to 2000rpm, swarf con, 550 x 1016mm capacity

Price on request

United Kingdom

Daewoo PUMA 350 cnc lathe Sold

Year: 1998

Control FANUC 18T Swing 700mm Swing Over Carriage 480mm Bar Capacity 91mm Chuck Size 381mm Maximum Cutting diameter 550mm Maximum Cutting Length 1050mm Turret Positions 10 Station Rapid Feedrates XZ: 16 x 20m/minute Spindle Diameter 26kW Spindle Nose A2-8 Spindle Speed 3000rpm Tool Change Capacity 10 Station X axis Travel 362mm Z axis Travel 1105mm Machine Dimensions 4890 x 2390 x 2240mm Machine Weight 9000kg

Price on request

United Kingdom

Used DAEWOO Puma 350A Cnc lathe Sold

Year: ~ 2000

Price on request

Poland

DAEWOO PUMA 350 cnc lathe Sold

Year: 1998

Max. turning Ø 700 mm X-Axis 362 mm Z-Axis 1.105 mm Spindle bore 91 mm Speed range 3500 Rpm Spindle power 26 kW ATC / revolver 12 Control Fanuc 18iT Chip conveyor Yes Pinole taper Mk6 Mk

Price on request

Netherlands

Used DAEWOO Puma 350A cnc lathe Sold

Year:

Additional Equipment: 15" chuck Bar Capacity: 91mm Control: FANUC O-T Maximum Cutting diameter: 550mm Maximum Cutting Length: 1050mm Spindle Motor Power: 16/19kW Spindle Speed: 3000rpm Swing: 700mm Turret Positions: 12 Description: Swarf conveyor, Tool setter, Coolant, Tailstock, Low Volt Light, 3 Jaw Chuck, Fixed Steady, Gearbox, Manuals, Tooling

Price on request

United Kingdom

Daewoo Puma 350A CNC Sold

Year: 1998

Condition: Used-Very Good Detailed Description: Control: Fanuc 18TC Chuck Size 12" (305mm) Max Diameter Bar Capacity 3.58" (95mm) Max Swing Over Bed / Carriage: 27.56" / 18.9" (700/475mm) Turning Diameter (Max / Std): 21.65" / 12.4" (540/310mm) Max Machining Length 41.34" (1050mm) Main Motor 30 HP (22.37) Spindle Speed 30 - 3000 RPM Tools 12 Spindle Bore 4.02" (100mm) Spindle Nose A2-8 Spindle Torque 745 ft. Lbs. Rapid Traverse Rates (X/Z): 630 / 790 IPM (16000/20000 mm/min) X-Axis Travel 14.25" …

Price on request

USA

Used DAEWOO PUMA 350LB Cnc lathe Sold

Year:

Price on request

Italy

Turning length	1050 mm
Turning Ø	550 mm
Ø above the bed	700 mm
Ø above transversing slide	480 mm
Length between centers	1016 mm
Type of CNC	FANUC 18T
X-axis	362 mm
Z-axis	1105 mm
Max workpiece weight	kg
Spindle taper
Spindle bore	102 mm
Number of turrets	1
Number of tools on turret	12
Number of rotating tools	6
Turning speed	3000 rpm
Spindle motor power	26 kW
Tailstock	no
Bar feeder	no
-------------------
Length x width x height	4890.0 × 2390.0 × 2240.0
Weight	9000 kg

Daewoo PUMA 350

Here is a selection of similar machines

Here is a selection of similar machines

Similar machines sold on our website

Categories

Menu

Are you looking for this machine?