Daewoo PUMA 300LC

Manufacturer	Daewoo
Model	PUMA 300LC
Category	Lathes - cnc lathes

View current offers

Specifications

Turning length	650 mm
Turning Ø	400 mm
Ø above the bed	570 mm
Ø above transversing slide	370 mm
Length between centers	900 mm
Type of CNC	FANUC 21iT
X-axis	250 mm
Z-axis	680 mm
Max workpiece weight	kg
Spindle taper	A2-11
Spindle bore	114.3 mm
Number of turrets
Number of tools on turret	10
Number of rotating tools	12
Turning speed	2800 rpm
Spindle motor power	18.5 kW
Tailstock	no
Bar feeder	no
-------------------
Length x width x height	3505.2 × 1727.2 × 1828.8
Weight	6079.9 kg

Used DAEWOO PUMA 300LC. Cnc Lathe, w/ Fanuc 18iT Cnc Control Sold

Year: 2000

Specification SWING OVER BED 23" SWING OVER SADDLE 14.5" X AXIS TRAVEL 11.1" Z AXIS TRAVEL 52.4" RAPID TRAVERSE RATE X/Z AXES 800/945 IPM MAX. BAR STOCK DIAMETER 4" SPINDLE MOTOR 35 HP TURRET CAPACITY 10 POSITIONS TAILSTOCK TAPER MT #5 TAILSTOCK QUILL TRAVEL & DIAMETER 3.94" TAILSTOCK BODY TRAVEL 46" Equipped With: FANUC 18iT CNC CONTROL WITH 10.4" LCD SCREEN RS-232 PORT INTERFACE FOR DNC OPERATION 12" 3-JAW CHUCK HYDRAULIC THRU HOLE CHUCK PROVISION FOR STEADY REST, 6" CAPACITY …

Price on request

USA

DAEWOO Puma 300LC cnc lathe Sold

Year: 2000

Control Fanuc 18i-TC Chuck Size 12″ Swing 22.4″ Turning Diameter 15.74″ Center Distance 50.34″ Bar Capacity 4.06″ X-Axis Travel 11.1″ Z-Axis Travel 52.3″ Rapid Traverse (X/Z) 944 IPM/787 IPM Spindle Speed 2,800 RPM Main Motor 30/35 Horsepower Turret Capacity 10 Tailstock (Y/N) Y Machine Hours 8,085 Operating Equipped With: (2) Speed Gearbox Programmable Tailstock Custom Macro-B Option Barfeed Interface Tool Presetter Chip Conveyor Miscellaneous Toolholders

Price on request

USA

Used DAEWOO PUMA 300LC. Cnc Lathe, w/ Fanuc 21iT Cnc Control Sold

Year: 1999

SPECIFICATIONS: MAX. SWING 22.4" MAX. TURNING DIA. 19" MAX SHAFT LENGTH 51.6" MAX BAR CAPACITY 4.5" X-AXIS TRAVEL 10.2" Z-AXIS TRAVEL 51.3" SPEED RANGES 2 SPEED TURRET CONFIGURATION 10 RAPID TRAVERSE 480/630 IPM TAIL STOCK DIA. MT #5 TAIL STOCK QUILL STROKE 4.0" MAIN MOTOR 35 HP AC EQUIPPED WITH: FANUC 21iT CNC CONTROL LNS HYDRAULIC PROGRAMMABLE STEADY REST PROGRAMMABLE TAILSTOCK CHIP CONVEYOR ALL AVAILABLE TOOL HOLDERS ALL MANUALS

Price on request

USA

Used DAEWOO PUMA 300LC. Cnc Lathe, w/ Turbo Chip Conveyor Sold

Year: 2000

EQUIPPED WITH: CONTROL: FANUC 18i-T Swing over bed 23.0? Swing over carriage 14.5? Distance between centers 52.8 SPINDLE: Draw tube I.D.4.05? A.C. Spindle Motor (30 min.)35 (2 speed gearbox) Maximum spindle torque 884 ft-lbs BED, SADDLE, & CROSS SLIDE: X axis travel 11.1 Z axis travel 52.4 Angle of slant bed 45 degrees X / Z axis guideway span 12.6 / 15.0 Tailstock guideway span 10.4 X / Z axis rapid traverse rate 630 IPM / 945 IPM X / …

Price on request

USA

Used DAEWOO PUMA 300LC Cnc lathe Sold

Year: 2000

SPECIFICATIONS HOURS : APPROX 5400 CONTROL: FANUC 18I-T CHUCK: 12" DIAMETER SWING: 23" CENTERS: 52" SPINDLE HOLE: 4.5" EQUIPPED WITH TAILSTOCK CHIP CONVEYOR TOOL SETTER 10 POS. TURRET

Price on request

USA

Used Daewoo Puma 300LC Cnc lathe Sold

Year: 2002

swing 102 mm, automatic telescope, CNC Fanuc 18i-T 2002, "CE"

Price on request

Poland

Daewoo PUMA 300LC

Here is a selection of similar machines

Here is a selection of similar machines

Similar machines sold on our website

Categories

Menu

Are you looking for this machine?