Daewoo Puma 2500SY

Manufacturer Daewoo
Model Puma 2500SY
Category Lathes - cnc lathes

Here is a selection of similar machines

Turning length 19.6 mm
Turning Ø 330 mm
Ø above the bed 600 mm
Ø above transversing slide 550 mm
Length between centers 650 mm
Type of CNC Fanuc 18i-TD
X-axis 9.8 mm
Z-axis 22.8 mm
Spindle taper A2-8
Spindle bore 3.5 mm
Number of turrets 1
Turning speed 3500 rpm
Spindle motor power 22.4 kW
Tailstock no
Bar feeder no
-------------------
Length x width x height 3118.0 × 3493.0 × 1705.0
Weight 5000 kg

Here is a selection of similar machines


Similar machines sold on Exapro

Used DAEWOO PUMA 2500SY Cnc lathe, 23.6" SWING, 33.8" CENTERS
Used DAEWOO PUMA 2500SY Cnc lathe, 23.6" SWING, 33.8" CENTERS Sold

Year: 2002

SPECIFICATIONS CONTROL: FANUC SWING OVER BED: 23.6" SWING OVER CARRIAGE: 21.6" MAX BAR CAPACITY: 3" DISTANCE BETWEEN SPINDLES: 33.8" MAX CUTTING DIAMETER: 13" SPINDLE SPEED (MAIN): 3,500 RPM SPINDLE SPEED (SUB): 6,000 RPM SPINDLE MOTOR(MAIN/SUB): 30/10 HP X-AXIS TRAVEL: 9.84" Y-AXIS TRAVEL: 4" Z-AXIS TRAVEL: 22.8" RAPID TRAVERSE RATES (X/Z): 790/945 IPM TURRET POSITIONS: 12 EQUIPPED WITH -FULL "C" AXIS ON MAIN AND SUB-SPINDLE -AUTOMATIC TOOL PRESETTER -RIGID TAP ON MAIN SPINDLE, SUB-SPINDLE, AND LIVE TOOLING -BOX WAY CONSTRUCTION -6" …

Price on request

US USA


Used Daewoo, Model Puma 2500SY. CNC Turning Center
Used Daewoo, Model Puma 2500SY. CNC Turning Center Sold

Year: 2004

Capacity: Swing Over Bed: 23.6" Swing Over Carriage: 21.7" Max. Bar Capacity: 3" AC Spindle Motor: 30HP Main Spindle C-Axis: Min. Programmable Angle: .001 degrees Rapid Traverse Rate: 200 RPM Travel: 4" Rapid Traverse Rate: 296 IPM Bed,Saddle,Cross Slide: Travel (X/Z-Axis): 9.8"/22.8" Rapid Traverse Rate (X/Z-Axis): 790/945 IPM Turret: # of Tools: 12 Turning Tool Shank Size: 1" Boring Bar Diameter (main spindle): 1.5" Turret Index Time (next station): 0.1 seconds

Price on request

US USA


Daewoo Puma 2500SY cnc lathe
Daewoo Puma 2500SY cnc lathe Sold

Year: 2004

Year: 2004 Make: Daewoo Model: Puma 2500SY Maximum Cutting diameter: 330mm Spindle Speed: 3500rpm Spindle Motor Power: 22kW Swing: 600mm Chuck Size: 250mm Bar Capacity: 76mm Control: FANUC 18iTB Y axis Travel: +/- 50mm Additional Equipment: Parts conveyor Turret Positions: 12 Maximum Cutting Length: 500mm Description:C axis & Milling, Sub Spindle, Swarf conveyor, Tool setter, Coolant, Y-Axis, Interlocked guards, Low Volt Light, 3 Jaw Chuck, Magazine Barfeed, Collet Chuck, Parts Catcher, Manuals, Tooling

Price on request

GB United Kingdom


Used Daewoo Puma 2500SY. Cnc Lathe, w/ Fanuc 18iTB CNC Control
Used Daewoo Puma 2500SY. Cnc Lathe, w/ Fanuc 18iTB CNC Control Sold

Year: 2004

Specifications: X Axis Travel: 9.84" Y Axis Travel: 4" Z Axis Travel: 22.8" Sub Spindle Speed: 60-6,000 RPM Rotating Tool RPM: 50-5,000 Tool Holder Type: BMT 55 Maximum Bar Capacity: 2.625" Swing Over Bed: 23.6" Equipped With: Fanuc 18iTB CNC Control Chip Conveyor Live Tooling/ Holders S-26 Main Spindle Collet Chuck 6.5” Sub-Spindle Chuck

Price on request

US USA


Used Daewoo Puma 2500SY cnc lathe
Used Daewoo Puma 2500SY cnc lathe Sold

Year: 2004

Chuck Size 10" Max Diameter Bar Capacity 3" Max Swing Over Bed / Carriage 23.6" / 21.6" Max Turning Diameter 13" Max Machining Length 19.6" Spindle Speed 35 - 3500 RPM Spindle Bore 3.54" Spindle Nose A2-8 Spindle Motor 30 HP Tools 12 (All Live) Milling Motor 5 HP Milling Speed 6000 RPM Sub Spindle Chuck Size 6.5" Sub Spindle Motor 10 / 7.4 HP Sub Spindle Speed 6000 RPM Sub Spindle Bar Capacity 1.375" Rapid Traverse Rates (X / …

Price on request

US USA


Daewoo Puma 2500SY cnc lathe
Daewoo Puma 2500SY cnc lathe Sold

Year: 2004

Chuck Size 10" Max Diameter Bar Capacity 3" Max Swing Over Bed / Carriage 23.6" / 21.6" Max Turning Diameter 13" Max Machining Length 19.6" Spindle Speed 35 - 3500 RPM Spindle Bore 3.54" Spindle Nose A2-8 Spindle Motor 30 HP Tools 12 (All Live) Milling Motor 5 HP Milling Speed 6000 RPM Sub Spindle Chuck Size 6.5" Sub Spindle Motor 10 / 7.4 HP Sub Spindle Speed 6000 RPM Sub Spindle Bar Capacity 1.375" Rapid Traverse Rates (X / …

Price on request

US USA


Used DAEWOO PUMA 2500SY. Cnc Lathe, w/ Fanuc 18iTB CNC Control
Used DAEWOO PUMA 2500SY. Cnc Lathe, w/ Fanuc 18iTB CNC Control Sold

Year: 2004

MACHINE SPECS: CONTROL: FANUC TURN DIAMETER: 13" MACHINING LENGTH: 33" BAR CAPACITY: 3" MAIN MOTOR: 30HP TURRET POSITION: 12 LIVE TOOLING/MILLING: YES EQUIPPED WITH: Fanuc 18iTB CNC Control Chip Conveyor Live Tooling/ Holders S-26 Main Spindle Collet Chuck 6.5” Sub-Spindle Chuck Parts Catcher Parts Conveyor Tool Presetter

Price on request

US USA


Daewoo Puma 2500SY cnc lathe
Daewoo Puma 2500SY cnc lathe Sold

Year: ~ 2004

control: Fanuc 18i TB 8" Main 6" Sub spindle Y axis 12 position turret Live tooling Turbo chip conveyor Parts Catcher 6,000 RPM Bar feed interface 2003 Machine installed in 2004

Price on request

US USA

Are you looking for this machine?

Contact us