Daewoo PUMA 230 B

Manufacturer Daewoo
Model PUMA 230 B
Category Lathes - cnc lathes

Here is a selection of similar machines

Turning length 490 mm
Turning Ø 290 mm
Ø above the bed 550 mm
Ø above transversing slide 390 mm
Length between centers 548 mm
Type of CNC FANUC 18 T
X-axis 205 mm
Z-axis 580 mm
Max workpiece weight  kg
Spindle taper ASA 6
Spindle bore 76 mm
Number of turrets 1
Number of tools on turret 12
Number of rotating tools 12
Turning speed 4500 rpm
Spindle motor power 15 kW
Tailstock no
Bar feeder no
-------------------
Length x width x height 2997.0 × 1670.0 × 1740.0
Weight 4240 kg

Here is a selection of similar machines


Similar machines sold on Exapro

Daewoo Puma 230  CNC-Drehmaschine
Daewoo Puma 230 CNC-Drehmaschine Sold

Year: 2003

Technische Daten Steuerung Fanuc 21i-T Max. Drehdurchmesser : 290 mm Max. Drehlaenge : 600 mm Max. Stangendurchlass: 65 mm Futterdurchmesser: 250 mm Max. Drehzahl : 4.200 U/min Werkzeugrevolver: 12 Positionen Antriebsleistung: 11kW Hauptspindel Maschinengewicht: 4.250 Kg Zubehoer Kuehlmitteleinrichtung Teilefaenger mit Foerderband Spaenefoerderer, Scharnierband Werkzeuglaengenmesssystem automatisch Reitstock geschleppt Schnittstelle fuer Stangenlader Handbueche

Price on request

DE Germany


Used DAEWOO, Model PUMA 230 SA. CNC LATHE WITH FANUC 18I
Used DAEWOO, Model PUMA 230 SA. CNC LATHE WITH FANUC 18I Sold

Year:

Price on request

US USA


Used DAEWOO PUMA 230B Cnc lathe
Used DAEWOO PUMA 230B Cnc lathe Sold

Year:

Price on request

IT Italy


Used Daewoo Puma 230B. Cnc Turning Center, w/ Fanuc 21i-T Control
Used Daewoo Puma 230B. Cnc Turning Center, w/ Fanuc 21i-T Control Sold

Year: 2001

SPECIFICATIONS: Control ....... Fanuc 21i-T Control Swing Over Bed .... 21.0" Swing Over Carriage ...... 13.0" Distance Between Centers ......... 26.3" Turret Stations...... 12 X-Axis Travel ....... 9.3" Z-Axis Travel. ....... 22.8" Rapid Traverse Rates X/ Z..... 945 IPM/ 1,200 IP Draw Tube I.D. ....... 2.6" Spindle Motor ...... 25 HP Turret Stations ....... 12 EQUIPPED WITH: 8" Hydraulic Chuck Programmable Tailstock Chip Conveyor

Price on request

US USA


Used Daewoo Puma 230B. Cnc Lathe, w/ Fanuc 21iT CNC Control w/ CRT
Used Daewoo Puma 230B. Cnc Lathe, w/ Fanuc 21iT CNC Control w/ CRT Sold

Year: 2001

Specifications Swing: Over Bed 21" Over Carriage 13" Distance Between Centers 26.3" Travels: X-Axis 9.3" Z-Axis 22.8" Thru Hole 2.99" Bar Capacity 2.6" Motor 25 HP Turret Positions 12 Equipped With: Fanuc 21iT CNC Control w/ CRT 8" Hydraulic Chuck Programmable Tailstock Parts Catcher Tool Presetter Chip Conveyor

Price on request

US USA


Used DAEWOO Puma 230B Cnc lathe
Used DAEWOO Puma 230B Cnc lathe Sold

Year: 1999

Price on request

IT Italy


Used Daewoo Puma 230GL 2-Axis Cnc lathe
Used Daewoo Puma 230GL 2-Axis Cnc lathe Sold

Year: 2001

Chuck 10" Swing 21" Max Cutting Dia/Length 13.8"/21.1" X-Cross Travel 9.5" Z-Longitudinal Travel 22.83" Spindle Bore 3.54" Bar Capacity 3.03" Spindle Nose A2-8 Rapid Traverse X, Y 945/1200 IPM Turret Index 0.1 sec Tool Positions 10 Speed RPM, Min-Max 35-3500 RPM Spindle HP 20/15 HP Tailstock Taper MT#4 Equipped With: Doosan GL Overhead Gantry Loading System. Carousel Type Parts Pool. Fanuc 18iT. 10" 3-Jaw Chuck. Thru Hole Cylinder. Tailstock. Chip Conveyor. Books/Manuals. All Tooling.

Price on request

US USA


Daewoo Puma 230 cnc lathe
Daewoo Puma 230 cnc lathe Sold

Year: 2001

Max. Turning diameter from 66 mm bar Max. Swing over bed mm 510 Max. Swing over carriage mm 330 Max. Turning diameter 350 mm Max. Turning length 550 mm spindle Spindle bore diameter 76 mm A2 spindle nose ASA 6 "Spindle rotation speed r / min 45-4500 Chuck diameter 210 mm Internal diameter bearing front / rear 110/90 mm Center height spindle-floor mm 1005 Spindle motor power Kw. 11/15 tailstock Quill stroke mm 80 Diameter tube 75 mm Morse taper …

Price on request

IT Italy


Daewoo Puma 230 cnc lathe
Daewoo Puma 230 cnc lathe Sold

Year:

Maximum Cutting diameter: 210mm Machine Weight: 4140KG Spindle Speed: 4500rpm Spindle Motor Power: 15kW Rapid Feedrates: X x Z : 20 x 25m/minute Swing: 510mm Bar Capacity: 65mm Control: FANUC 18iT Swing over the Cross-slide: 330mm Spindle Nose: A2-6 Turret Positions: 12 Station Maximum Cutting Length: 548mm Description: Tool setter, Coolant, Interlocked guards, Low Volt Light, 3 Jaw Chuck, Magazine Barfeed, Parts Catcher, Manuals, Tooling, Swarf Conveyor

Price on request

GB United Kingdom


DAEWOO Puma 230 cnc lathe
DAEWOO Puma 230 cnc lathe Sold

Year: 2001

TOUR DAEWOO TYPE PUMA 230 Max turning diameter: 350 [mm] Max diameter in bar: 65 [mm] Distance between points: 548 [mm] X and Y races: 242x580 [mm] Power spindle: 15 [kW] CN FANUC 18 iT Year 2001 Spindle speed: 45 - 3500 [rpm] Chip conveyor yes Measuring arm yes Number of cutting hours 8366 h Turret: 10 posts

Price on request

FR France


Used Daewoo PUMA 230 cnc lathe
Used Daewoo PUMA 230 cnc lathe Sold

Year:

Lathe Daewoo Puma 230, Cnc Fanuc 21 I - T, Diam. Self-centering: 210 Mm. Features : Max. Diam. Rotating On The Bench: 550 Mm Max. Diam. Rotating On The Carriage: 390 Mm Max. Diam. Turning On The Bench: 290 Mm Max. Turning Length From Self-centering: 500 Mm Max. Turning Bar Diameter: 65 Mm Diam. Spindle Hole: 76 Mm Spindle Nose: Asa 6 Spindle Speed: 45 - 4.500 Rpm Spindle Motor Power: 11/15 Kw Racing : X: 205 Mm Z: 580 …

Price on request

IT Italy


Daewoo Puma 230 cnc lathe
Daewoo Puma 230 cnc lathe Sold

Year: 2001

Puma 230 2001 model 10 inch mirror box sled Spindle 60 mm

Price on request

TR Turkey


Used Daewoo, Model Puma 230S. CNC Turning Center with Sub Spindle
Used Daewoo, Model Puma 230S. CNC Turning Center with Sub Spindle Sold

Year: 2001

SPECIFICATIONS: SWING OVER BED: 20.1" SWING OVER CARRIAGE: 13" DISTANCE BETWEEN MAIN AND SUBSPINDLE FACE: 32.3" SPINDLE SPEED RPM:60- 6,000 RPM SPINDLE MOTOR: 20HP MAX SPINDLE TORQUE: 141 FT-LBS. X-AXIS TRAVEL: 8.7" Z AXIS TRAVEL: 22.8" B-AXIS TRAVEL: 22.8" ANGLE OF SLANT BED: 45 DEGREES # OF TOOLS ON TURRET: 12 TURNING TOOL SHANK SIZE: 1.0" BORING BAR DIAMETER: 1.5" EQUIPPED WITH: COOLANT CHIP CONVEYOR BARFEED

Price on request

US USA


Used DAEWOO Puma 230 B Cnc lathe
Used DAEWOO Puma 230 B Cnc lathe Sold

Year: 2002

Price on request

DE Germany


Daewoo Puma 230 cnc lathe
Daewoo Puma 230 cnc lathe Sold

Year: 1999

2-axis lathe Daewoo Puma 230 CNC Fanuc Spindle nose ASA 6 Chuck 210 mm Spindle motor power Kw 11/15 Bar passage 65 Maximum turning diameter 350 mm Turret 12 positions tailstock chip conveyor

Price on request

IT Italy


Used DAEWOO PUMA 230B. CNC TURNING CENTER
Used DAEWOO PUMA 230B. CNC TURNING CENTER Sold

Year: 2000

SPECIFICATIONS: SWING OVER BED ....................... 21" SWING OVER SADDLE .................... 13" X-AXIS TRAVEL ........................ 9.5" Z-AXIS TRAVEL ........................ 22.8" SPINDLE BORE DIA. .................... 2.99" DRAW TUBE DIA. ....................... 2.60" NUMBER OF TOOL STATIONS .............. 12 OD TOOL SIZE ......................... 1" BORING BAR DIAMETER .................. 1.5" INDEXING TIME ........................ 0.15 sec. RAPID TRAVERSE RATE X/Z .............. 945/1200 IPM TAILSTOCK QUILL DIA. ................. 3" TAILSTOCK QUILL STROKE ............... 3.15" SPINDLE DRIVE MOTOR .................. 20HP APPROX. DIMENSIONS ................... 13' x 6' x 6' …

Price on request

US USA


Daewoo Puma 230 cnc lathe
Daewoo Puma 230 cnc lathe Sold

Year: 2001

DAEWOO PUMA 230 CNC LATHE: Year: 2001. Measurements: 3 × 1.68 × 1.75 m. Theoretical weight: 4240 Kg Capacity: ø230 x 700mm. Approximate working hours: 39,400 hours. FANUC series 21i-T numerical control. Machine manual included. It can be programmed at the machine or transfer the programs by cable. -The machine is in disuse due to the breakdown of the tool change drum motor.

Price on request

ES Spain


DAEWOO PUMA 230 B GL cnc lathe
DAEWOO PUMA 230 B GL cnc lathe Sold

Year: 2001

Fanuc 18i control Chuck diam. 210 b.p. Mm. 65 12-position turret hydraulic tailstock chip conveyor Portal for loading / unloading pieces raw / processed with stock carousel 14 positions swing over bed 510 mm Max. Turning diameter 350 mm Max. Turning length 548 mm Max. Turning diameter from bar 65 mm Spindle Attack ASA 6 Rotation speed r / min 4500 Pot. AC motor (cont./30min.) kW 11/15 turret N ° tools nr. 12

Price on request

IT Italy


Daewoo Puma 230 B
Daewoo Puma 230 B Sold

Year: 2000

Daewoo Puma 230 B

Price on request

IT Italy


Daewoo Puma 230 cnc lathe
Daewoo Puma 230 cnc lathe Sold

Year: 1999

Spindle nose ASA 6 Chuck 210 mm Spindle motor power Kw 11/15 Bar passage 65 Maximum turning diameter 350 mm Turret 12 positions tailstock chip conveyor

Price on request

IT Italy


Used DAEWOO PUMA 230 B Cnc lathe
Used DAEWOO PUMA 230 B Cnc lathe Sold

Year: 2002

Price on request

FR France


Daewoo Puma 230 LB cnc lathe
Daewoo Puma 230 LB cnc lathe Sold

Year:

Description Daewoo Puma 230 Lb Lathe, Fanuc 18 - T CNC, Chuck Diam.: 210 Mm Kitagawa. Features : Max. Diam. Rotating On Bench: 550 Mm Max. Diam. Rotating On The Carriage: 390 Mm Max. Diam. Turnable On Bench: 290 Mm Turnable Length From Chuck: 500 Mm Max. Turnable Diameter From Bar: 65 Mm Spindle hole: 76 Mm Spindle nose: Asa 6 Spindle speed: 45 - 4.500 rpm. Spindle Motor Power: 11/15 Kw Racing : X: 205 Mm Z: 580 Mm …

Price on request

IT Italy


DAEWOO Puma 230SC cnc lathe
DAEWOO Puma 230SC cnc lathe Sold

Year: 2001

This Daewoo Puma 230SC Lathe was manufactured in the year 2001 in Korea. It is equipped with a FANUC Series 18iT control unit and has 4 axis. The machine has SPINDLE TURNS 1 of 3500 rpm and SPINDLE TURNS 2 of 6000 rpm, includes many original tool holders and tool holders, is in good condition, and is well maintained. Machine weight: 4240 kg CNC: FANUC Series 18iT Number of axis: 4 X-Axis Movement: 205 mm Z-Axis Movement: 580 mm B-Axis …

Price on request

IT Italy


DAEWOO PUMA 230 B cnc lathe
DAEWOO PUMA 230 B cnc lathe Sold

Year: 2001

Units of Government: FANUC 18-T Capacity: max. diam. Swing over bed 510mm max. diam. Swing over carriage 330mm max. diam. Swing 350mm max. turning length 548mm max. diam. Swing from bar 65mm Chuck: max. speed of rotation 4500 rpm Spindle nose ASA 6 " Diam. 205 mm 3-jaw chuck Spindle motor power 11/15 Kw Tower: Stations turret 12 pos. Tools dimensions turning / 25x25 bore - Ø 40 Accessories included: chip conveyor belt - Tool setting

Price on request

IT Italy


DAEWOO PUMA 230 C cnc lathe
DAEWOO PUMA 230 C cnc lathe Sold

Year: 2000

Working length 530 mm Max. working diameter 350 mm Swing over bed 510 mm Spindle speeds 45 - 4500 rpm Spindle bore 65 mm Number of tools 12 pcs Control FANUC 21 i Max. power 15 Kw Equipped with 3 jaw chuck Tailstock Short bar loader Partcatcher Tool-Setter Collet attachment Tool posts Chip conveyor Coolant Service tools etc.

Price on request

DK Denmark


Daewoo Puma 230B cnc lathe
Daewoo Puma 230B cnc lathe Sold

Year:

Daewoo Puma 230B cnc lathe Spindle hole clearance: 60mm Chuck size: 250mm Control: FANUC 21i-TB Maximum machining diameter: 350mm Maximum machining length: 562mm Rapid feeds: XZ: 24 x 30 m Spindle motor power: 18.5 kW Spindle speed: 4500 rpm Ground clearance: 550mm Flight over the slide: 390mm Tool positions: 12 C axis Chip conveyor Automatic tool setter Paw picking up details Details belt conveyor Barfeeder connection interface Tailstock 3 jaw chuck (handle and frames are not included in the price …

Price on request

PL Poland


DAEWOO PUMA 230 B CNC lathe
DAEWOO PUMA 230 B CNC lathe Sold

Year: 2001

Controle unit FANUC 18i-T 2 axes.

Price on request

IT Italy


Used Daewoo Model   Puma 230 GL  CNC Fanuc 18iT   Lathe with Gantry Loading System,
Used Daewoo Model Puma 230 GL CNC Fanuc 18iT Lathe with Gantry Loading System, Sold

Year: 2001

Specifications: Swing Over Bed 21" Swing Over Carriage 13" Distance Between Centers 26.3" Maximum Turning Diameter 13.8" Maximum Turning Length 21.6" Spindle Speed Range 45 - 4500 RPM Spindle Nose A2-8 Draw Tube ID 2.60” Spindle Bore Diameter 2.99” Main Motor 20HP X-Axis Travel 9.3” Z-Axis Travel 22.8” Rapid Traverse Rate X / Z-Axes 945 / 1200 IPM Turret Capacity 12 Tools Tailstock Quill Diameter 3” Equipped with: Fanuc 18iT CNC Control w/CRT Daewoo Gantry Load System Chip Conveyor Programmable …

Price on request

US USA


DAEWOO PUMA 230B CNC lathe
DAEWOO PUMA 230B CNC lathe Sold

Year: 2000

Price on request

PL Poland

Are you looking for this machine?

Contact us