Daewoo Puma 2000SY

Manufacturer Daewoo
Model Puma 2000SY
Category Lathes - cnc lathes

Here is a selection of similar machines

Turning length 510 mm
Turning Ø 330 mm
Ø above the bed 510 mm
Ø above transversing slide 330 mm
Length between centers 400 mm
Type of CNC Fanuc 18iTB
X-axis 250 mm
Z-axis 580 mm
Max workpiece weight  kg
Spindle taper
Spindle bore 76.2 mm
Number of turrets 1
Number of tools on turret 12
Number of rotating tools 12
Turning speed 4500 rpm
Spindle motor power 20 kW
Tailstock no
Bar feeder no
-------------------
Length x width x height 2667.0 × 1700.0 × 1752.6
Weight 4750 kg

Here is a selection of similar machines


Similar machines sold on Exapro

Used Daewoo Puma 2000SY Cnc turning center
Used Daewoo Puma 2000SY Cnc turning center Sold

Year: 2003

SWING OVER BED ......................... 23.6" SWING OVER SADDLE ...................... 21.7" RECOM. TURNING DIA. .................... 8.3" MAX. TURNING DIA. ...................... 13" MAX. TURNING LENGTH .................... 20" BAR WORK DIAMETER ...................... 2.6" X-AXIS TRAVEL .......................... 9.8" Z-AXIS TRAVEL .......................... 22.8" Y-AXIS TRAVEL .......................... 4(+/-2) B-AXIS TRAVEL .......................... 22.8" SPINDLE SPEED .......................... 4500 RPM SPINDLE NOSE ........................... A2-6 SPINDLE BORE DIA. ...................... 3" MIN. SPINDLE INDEX ANGLE (C-AXIS) ...... 0.001 deg. NO. OF TOOL STATIONS ................... 12 TURRET INDEX TIME ...................... 0.1 sec. …

Price on request

US USA


Used DAEWOO Puma 2000MSY 5-axis Turning Centre with Sub-spindle
Used DAEWOO Puma 2000MSY 5-axis Turning Centre with Sub-spindle Sold

Year: 2004

Bar Capacity: 65mm X-axis: 250mm Z-axis: 580mm Y-axis: 150mm C-axis: C1/C2=360.000deg Turret Stations: 12 (all driven) Main Spindle Speed: 45 ~ 4500rpm Sub-spindle Speed: 60 ~ 6000rpm

Price on request

GB United Kingdom


Tornio CNC  Daewoo   	PUMA 2000SY
Tornio CNC Daewoo PUMA 2000SY Sold

Year: 2003

Diametro barra max. mm 65 Nr. mandrini 2 avanzamento rapido m/min 20 / (Y = 7,5) motore mandrino kw 15 corsa - X mm 250 corsa - Y mm 100 corsa - Z mm 580 #Werkzeugrevolver mit 12 Stationen #Fanuc 18i-TA #Schnelle Revolverinderxierung #Rückseitenbearbeitung mit positionierbarer Gegenspindel #Angetriebene Werkzeuge radial un achsial #Werkstückentnahmesystem (Teielfänger) #Werzeugvermessung, automatisch #Scharnierband – Späneförderer #Hochdruckpumpe Zubehör Fräshalter Stück 5 Bohrhalter, doppel Stück 5 Bohrhalter, einfach Stück 5 Außenhalter, einfach Stück 3 Außenhalter, doppel Stück 5 …

Price on request

IT Italy


Used Daewoo Puma 2000SY. Cnc Lathe, w/ Sub Spindle and Y Axis
Used Daewoo Puma 2000SY. Cnc Lathe, w/ Sub Spindle and Y Axis Sold

Year: 2005

Specifications: X Axis Travel: 9.84" Y Axis Travel: 4" Z Axis Travel: 22.8" Spindle Speed ( Main): 45-5,000 RPM Sub Spindle Speed: 60-6,000 RPM Rotating Tool RPM: 50-5,000 Tool Holder Type: BMT 55 Maximum Bar Capacity: 2.625" Swing Over Bed: 23.6" Equipped With: Full "C" Axis On Main and Sub-Spindle Automatic Tool Presetter Rigid Tap On Main Spindle, Sub-Spindle, and Live Tooling Tool Monitoring System Box Way Construction 6" Sub-Spindle Chuck 8" Main Spindle Chuck Chip Conveyor Barfeeder

Price on request

US USA


DAEWOO PUMA 2000SY Cnc lathe
DAEWOO PUMA 2000SY Cnc lathe Sold

Year: 2003

SWING OVER BED ......................... 23.6" SWING OVER SADDLE ...................... 21.7" RECOM. TURNING DIA. .................... 8.3" MAX. TURNING DIA. ...................... 13" MAX. TURNING LENGTH .................... 20" BAR WORK DIAMETER ...................... 2.6" X-AXIS TRAVEL .......................... 9.8" Z-AXIS TRAVEL .......................... 22.8" Y-AXIS TRAVEL .......................... 4(+/-2) B-AXIS TRAVEL .......................... 22.8" SPINDLE SPEED .......................... 4500 RPM SPINDLE NOSE ........................... A2-6 SPINDLE BORE DIA. ...................... 3" MIN. SPINDLE INDEX ANGLE (C-AXIS) ...... 0.001 deg. NO. OF TOOL STATIONS ................... 12 TURRET INDEX TIME ...................... 0.1 sec. …

Price on request

US USA


Used DAEWOO PUMA 2000LSY Cnc lathe
Used DAEWOO PUMA 2000LSY Cnc lathe Sold

Year: 2005

SPECIFICATIONS AC HIGH TORQUE SPINDLE MOTOR (MAIN): 20 HP SPINDLE SPEED (MAIN): 45 - 5,000 RPM SPINDLE MOTOR (SUB): 10 HP SPINDLE SPEED (SUB): 60 – 6,000 RPM TRAVELS : -X AXIS : 10.0” -Y-AXIS: 4.0” (±2.0”) -Z AXIS: 32.6” C AXIS MINIMUM PROGRAMMABLE ANGLE (MAIN & SUB): .001 DEGREE B AXIS TRAVEL (SUB-SPINDLE): 32.7” ROTATING TOOL RPM: 50 - 5,000 RPM ROTATING TOOL SPINDLE MOTOR (10 MIN RATING): 7.5 HP TOOL HOLDER TYPE: BMT 55 MAXIMUM BAR CAPACITY: 2.625” …

Price on request

US USA


Used DAEWOO PUMA TT2000SY. CNC TWIN SPINDLE TWIN TURRET TURNING CENTER
Used DAEWOO PUMA TT2000SY. CNC TWIN SPINDLE TWIN TURRET TURNING CENTER Sold

Year: 2004

Specifications: BAR CAPACITY........................................................... 2.6" DRIVE MOTOR............................................................. 30 HP (SPINDLE 1 AND 2) TURRET CAPACITY..................................................... 12 ATC (BOTH TURRETS) ROTARY TOOL MOTOR.............................................. 7.5 HP ROTARY TOOL SPEED................................................. 4000 RPM TRAVELS (X1)................................................................ 10.1" (Z1)................................................................. 31.5" (C1)................................................................ 360.0 (Y1)................................................................ 4.7" (B1)................................................................ 31.9" (X2)................................................................ 7.5" (Z2)................................................................. 35.4" (C2)................................................................. 360.0 EQUIPPED WITH: FANUC 18iTB CNC CONTROL CHIP CONVEYOR PARTS CATCHER (2) 8" CHUCKS Y AXIS- (4) HEADS LIVE TOOLING MISC LIVE AND STD TOOL HOLDERS HOURS UPPER TURRET......... 11,036 HOURS LOWER TURRET......... 11,676

Price on request

US USA


Used Daewoo Puma 2000SY Cnc lathe
Used Daewoo Puma 2000SY Cnc lathe Sold

Year: 2003

Specification: SWING OVER BED ......................... 23.6" SWING OVER SADDLE ...................... 21.7" RECOM. TURNING DIA. .................... 8.3" MAX. TURNING DIA. ...................... 13" MAX. TURNING LENGTH .................... 20" BAR WORK DIAMETER ...................... 2.6" X-AXIS TRAVEL .......................... 9.8" Z-AXIS TRAVEL .......................... 22.8" Y-AXIS TRAVEL .......................... 4(+/-2) B-AXIS TRAVEL .......................... 22.8" SPINDLE SPEED .......................... 4500 RPM SPINDLE NOSE ........................... A2-6 SPINDLE BORE DIA. ...................... 3" MIN. SPINDLE INDEX ANGLE (C-AXIS) ...... 0.001 deg. NO. OF TOOL STATIONS ................... 12 TURRET INDEX TIME ...................... 0.1 …

Price on request

US USA


Used 2004 Daewoo Puma TT2000SY Turning Center
Used 2004 Daewoo Puma TT2000SY Turning Center Sold

Year: 2004

DAEWOO PUMA TT2000SY CNC TWIN SPINDLE TWIN TURRET TURNING CENTER Specifications: MANUFACTURED IN 2004 MAX TURNING DIAMETER....................................... 15.4" MAX TURNING LENGTH........................................... 13.8" BAR CAPACITY........................................................... 2.6" SPINDLE NOSE............................................................ A2-6 (SPINDLE 1 AND 2) SPINDLE BORE............................................................ 3.0" (SPINDLE 1 AND 2) SPINDLE SPEED........................................................... 5,000 RPM (SPINDLE 1 AND 2) DRIVE MOTOR............................................................. 30 HP (SPINDLE 1 AND 2) TURRET CAPACITY..................................................... 12 ATC (BOTH TURRETS) ROTARY TOOL MOTOR.............................................. 7.5 HP ROTARY TOOL SPEED................................................. 4000 RPM TRAVELS (X1)................................................................ 10.1" (Z1)................................................................. 31.5" (C1)................................................................ 360.0 (Y1)................................................................ 4.7" …

Price on request

US USA


Daewoo PUMA 2000SY - CNC Lathe multiaxis
Daewoo PUMA 2000SY - CNC Lathe multiaxis Sold

Year: 2004

Year: 2004 Turn table diameter: 334 mm Turning length: 510 mm Chuck diameter: 210 mm Swing over bed: 600 mm Swing over cross slide: 550 mm Axis X: 250 mm Axis Y: 100 (+/- 50) mm Rotation of main spindle: 4500 rpm Dimensions l x w x h: 3185 x 1775 x 2060 mm Weight: 4850 Kg CNC Fanuc serie 18i - TB Max. bar diameter 65 mm. Max. diameter of boring 40 mm. Spindle bore 76 mm. 12 driven …

Price on request

CZ Czech Republic


Used DAEWOO PUMA 2000SY Cnc lathe, FANUC 18I-TB CNTRL
Used DAEWOO PUMA 2000SY Cnc lathe, FANUC 18I-TB CNTRL Sold

Year: 2005

SPECIFICATIONS CNC CONTROL: FANUC 18I-TB CAPACITY: -SWING OVER BED: 23.6" -SWING OVER CARRIAGE: 21.6" -MAX. BAR CAPACITY: 2.625" -MAX. TURNING DIAMETER (MAIN SPINDLE): 13" -MAX. TURNING LENGTH: 20.1" -DISTANCE BETWEEN MAIN & SUB-SPINDLE: 33.8" MAIN SPINDLE: -SPINDLE SPEED: 45 - 5,000 RPM -SPINDLE NOSE: ASA A2-6 -DRAW TUBE ID: 2.677" -SPINDLE BORE DIAMETER: 2.99" -AC HIGH TORQUE SPINDLE MOTOR: 30HP -MAX. SPINDLE TORQUE: 351 FT-LBS MAIN SPINDLE C-AXIS: -MIN. PROGRAMMABLE ANGLE: .001 DEGREES -RAPID TRAVERSE RATE: 200 RPM -REPEATABILITY: +/- …

Price on request

US USA


Used DAEWOO PUMA TT2000SY Cnc lathe, FANUC 18I TB CNTRL
Used DAEWOO PUMA TT2000SY Cnc lathe, FANUC 18I TB CNTRL Sold

Year: 2004

SPECIFICATIONS MAX TURNING DIAMETER: 15.4" MAX TURNING LENGTH: 13.8" BAR CAPACITY: 2.6" SPINDLE NOSE: A2-6 (SPINDLE 1 AND 2) SPINDLE BORE: 3.0" (SPINDLE 1 AND 2) SPINDLE SPEED: 5,000 RPM (SPINDLE 1 AND 2) DRIVE MOTOR: 30 HP (SPINDLE 1 AND 2) TURRET CAPACITY: 12 ATC (BOTH TURRETS) ROTARY TOOL MOTOR: 7.5 HP ROTARY TOOL SPEED: 4000 RPM TRAVELS: -(X1): 10.1" -(Z1): 31.5" -(C1): 360.0 -(Y1): 4.7" -(B1): 31.9" -(X2): 7.5" -(Z2): 35.4" -(C2): 360.0 EQUIPPED WITH -FANUC 18iTB CNC …

Price on request

US USA


Used Daewoo, Model Puma 2000SY. Cnc Lathe, w/ 6” Samchully Power Chuck
Used Daewoo, Model Puma 2000SY. Cnc Lathe, w/ 6” Samchully Power Chuck Sold

Year: 2005

Specifications: X Axis Travel: 9.84" Y Axis Travel: 4" Z Axis Travel: 22.8" Sub Spindle Speed: 60-6,000 RPM Rotating Tool RPM: 50-5,000 Tool Holder Type: BMT 55 Maximum Bar Capacity: 2.625" Swing Over Bed: 23.6" Equipped With: Full "C" Axis On Main and Sub-Spindle Tool Setter Parts Catcher Parts Conveyor SMW 12’ Bar Feeder Misc. Spindle Liners Royal 5C Dead Line Collet Chuck 8” Kitagawa B-208 6” Samchully Power Chuck (4) x – axis live tool holders (1) z – …

Price on request

US USA

Are you looking for this machine?

Contact us