Daewoo Puma 1500SY

Manufacturer Daewoo
Model Puma 1500SY
Category Lathes - cnc lathes

Here is a selection of similar machines

Turning length 510.5 mm
Turning Ø 329.9 mm
Ø above the bed 599.9 mm
Type of CNC CNC Turning Center
X-axis 249.9 mm
Z-axis 579.1 mm
Spindle bore 50.8 mm
Number of turrets 1
Number of tools on turret 12
Number of rotating tools 12
Turning speed 6000 rpm
Spindle motor power 14.9 kW
Tailstock no
Bar feeder no
-------------------
Length x width x height 510.5 × 329.9 × 599.9
Weight 4809.4 kg

Here is a selection of similar machines


Similar machines sold on our website

Used Daewoo Puma 1500SY Cnc lathe
Used Daewoo Puma 1500SY Cnc lathe Sold

Year: 2005

General Specifications As Per Brochure CNC Control: Fanuc 18i-TB Capacity: Swing Over Bed: 23.6" Swing Over Carriage: 21.7" Max. Bar Capacity: 1.8" Max. Turning Diameter (main spindle): 13" Max. Turning Length: 20.9" Main Spindle: Spindle Speed: 6000 RPM Spindle Nose: ASA A2-5 Spindle Bore Diameter: 2.1" Min. Programmable Angle: .001 degrees Y-Axis: Travel: 4"(+/-2") Rapid Traverse Rate: 296 IPM Bed,Saddle,Cross Slide: Travel (X/Z-Axis): 9.8"/22.8" Rapid Traverse Rate (X/Z-Axis): 788/945 IPM Turret: # of Tools: 12 Turning Tool Shank Size: 1" …

Price on request

US USA


Used  Daewoo Puma 1500SY 6 Axis CNC Multitasking Turning/Milling Center Fanuc 18iT-B Control
Used Daewoo Puma 1500SY 6 Axis CNC Multitasking Turning/Milling Center Fanuc 18iT-B Control Sold

Year: 2004

Specifications: Maximum Swing Over Bed/Carriage 23.6"/21.6" Maximum Cutting Diameter 13" Maximum Distance Between Spindles 33.8" Maximum Bar Diameter 1.75" X Axis Travel 9.84" Z Axis Travel 22.8" Y Axis Travel +/- 1.97" B Axis Travel (Sub Spindle Stroke) 32.6" C Axis (Main/Sub Spindle) Positioning .001 Degree Chuck Size, Main/Sub 8"/6" Spindle Motor, Main/Sub 10 HP Spindle Speeds, Main/Sub 60-6,000 RPM Rotary Tool Spindle HP AC 7.5 HP Rotary Tool Spindle Speed 50 - 5,000 RPM Turret Positions 12 Machine (only) …

Price on request

US USA


DAEWOO PUMA 1500SY CNC TURNING LATHE
DAEWOO PUMA 1500SY CNC TURNING LATHE Sold

Year:

Make: Daewoo Model No.: Puma 1500SY Serial No.: P150SY0388 Condition: Very Good Comes with 2 X Collet Chuck, Tool Holders, Cool blaster, parts & Chip Conveyor All specifications are approximations, and are subject to verification. “One Our Floor, Fully powered / tested & in Good working condition. Only 14,867 cutting hours. Equipped with 2 Collet Chucks, Full C Axis, Milling, Sub Spindle and Y Axis. Comes with Parts & chip conveyor, live tool holders.” ——————————————————- Daewoo Puma 1500SY Equipped With: …

Price on request

US USA


2004 DAEWOO PUMA 1500SY with Fanuc 18i-TB Control, Sub Spindle, Y axis
2004 DAEWOO PUMA 1500SY with Fanuc 18i-TB Control, Sub Spindle, Y axis Sold

Year: 2004

2004 DAEWOO PUMA 1500SY with Fanuc 18i-TB Control, Sub Spindle, Y axis, Jorgensen Chip Conveyor, 2006 IEMCA BOSS 551 Magazine Barfeeder, 3 X-Axis & 3 Z Axis Live tools(BMT55), ALL Static tool holders (BMT55), 3 Jaw Chucks for the Main and Sub spindle,1 set of guide channels that max out the bar capacity to 1 5/8 Round, Will run as small as 3/8" Diameter.

Price on request

US USA


2004 DAEWOO PUMA 1500SY with Fanuc 18i-TB Control, Sub Spindle, Y axis
2004 DAEWOO PUMA 1500SY with Fanuc 18i-TB Control, Sub Spindle, Y axis Sold

Year: 2004

2004 DAEWOO PUMA 1500SY with Fanuc 18i-TB Control, Sub Spindle, Y axis, Jorgensen Chip Conveyor, 2006 IEMCA BOSS 551 Magazine Barfeeder, 3 X-Axis & 3 Z Axis Live tools(BMT55), ALL Static tool holders (BMT55), 3 Jaw Chucks for the Main and Sub spindle,1 set of guide channels that max out the bar capacity to 1 5/8 Round, Will run as small as 3/8" Diameter.

Price on request

US USA


2004 DAEWOO PUMA 1500SY with Fanuc 18i-TB Control, Sub Spindle, Y axis
2004 DAEWOO PUMA 1500SY with Fanuc 18i-TB Control, Sub Spindle, Y axis Sold

Year: 2004

2004 DAEWOO PUMA 1500SY with Fanuc 18i-TB Control, Sub Spindle, Y axis, Jorgensen Chip Conveyor, 2006 IEMCA BOSS 551 Magazine Barfeeder, 3 X-Axis & 3 Z Axis Live tools(BMT55), ALL Static tool holders (BMT55), 3 Jaw Chucks for the Main and Sub spindle,1 set of guide channels that max out the bar capacity to 1 5/8 Round, Will run as small as 3/8" Diameter.

Price on request

US USA


2004 DAEWOO PUMA 1500SY with Fanuc 18i-TB Control, Sub Spindle, Y axis
2004 DAEWOO PUMA 1500SY with Fanuc 18i-TB Control, Sub Spindle, Y axis Sold

Year: 2004

2004 DAEWOO PUMA 1500SY with Fanuc 18i-TB Control, Sub Spindle, Y axis, Jorgensen Chip Conveyor, 2006 IEMCA BOSS 551 Magazine Barfeeder, 3 X-Axis & 3 Z Axis Live tools(BMT55), ALL Static tool holders (BMT55), 3 Jaw Chucks for the Main and Sub spindle,1 set of guide channels that max out the bar capacity to 1 5/8 Round, Will run as small as 3/8" Diameter.

Price on request

US USA


2004 DAEWOO PUMA 1500SY with Fanuc 18i-TB Control, Sub Spindle, Y axis
2004 DAEWOO PUMA 1500SY with Fanuc 18i-TB Control, Sub Spindle, Y axis Sold

Year: 2004

2004 DAEWOO PUMA 1500SY with Fanuc 18i-TB Control, Sub Spindle, Y axis, Jorgensen Chip Conveyor, 2006 IEMCA BOSS 551 Magazine Barfeeder, 3 X-Axis & 3 Z Axis Live tools(BMT55), ALL Static tool holders (BMT55), 3 Jaw Chucks for the Main and Sub spindle,1 set of guide channels that max out the bar capacity to 1 5/8 Round, Will run as small as 3/8" Diameter.

Price on request

US USA


DAEWOO Puma 1500Y 4-axis Turning Centre
DAEWOO Puma 1500Y 4-axis Turning Centre Sold

Year: 2002

Maximum Machining Diameter: 350mm Standard Machining Diameter: 255mm Maximum Machining Length: 550mm Maximum Bar Capacity: 45mm Z-axis Travel: 579mm X-axis Travel: 249mm Y-axis Travel: 100mm C-axis: 360.0000 Spindle Speeds: 60 ~ 6000rpm Tailstock Bore: MT No. Number of Turret Stations: 12 (12 driven) Maximum Driven Tool Speed: CNC System: Fanuc 18i-T Equipped with: FMB SL80L Magazine Bar Feed, Collet Chuck, Tool Setter, Turret Tools, Parts atcher, Tailstock

Price on request

GB United Kingdom


Daewoo Puma 1500SY
Daewoo Puma 1500SY Sold

Year: 2004

Daewoo Puma 1500SY year of manufacture 2004 still in use, under power. 14907 working hours Specs: - Spindle number : 2 - Main spindle * type : A2-5 * power : 15-11 [kW] * speed : 6000 [Rpm] * max. bar clearance Ø : 45 [mm] * max. machining Ø : 330 [mm] * max. Ø on workbench : 550 [mm] * max. machining length : 530 [mm] * axis C * stopping : 360 000 positions - Counter spindle …

32,000 €

PL Poland


Used 2004 Daewoo Puma 1500SY CNC Lathe
Used 2004 Daewoo Puma 1500SY CNC Lathe Sold

Year: 2004

2004 DAEWOO PUMA 1500SY with Fanuc 18i-TB Control, Sub Spindle, Y axis, INCLUCING: 3 X-Axis & 3 Z Axis Live tools(BMT55), ALL Static tool holders (BMT55), 3 Jaw Chucks for the Main and Sub spindle, 2006 IEMCA BOSS 551 Magazine Barfeeder, 1 set of guide channels that max out the bar capacity to 1 5/8 Round, Will run as small as 3/8" Diameter

Price on request

US USA

Are you looking for this machine?

Contact us