Daewoo Puma 12L

Manufacturer Daewoo
Model Puma 12L
Category Lathes - cnc lathes

Here is a selection of similar machines

Turning length 1020 mm
Turning Ø 375 mm
Ø above the bed 580 mm
Ø above transversing slide 375 mm
Length between centers 1020 mm
Type of CNC Fanuc
X-axis 260 mm
Z-axis 1050 mm
Max workpiece weight  kg
Spindle taper A2-8
Spindle bore 75 mm
Number of turrets 1
Number of tools on turret 12
Number of rotating tools
Turning speed 2500 rpm
Spindle motor power 22 kW
Tailstock no
Bar feeder no
-------------------
Length x width x height 3200.0 × 2080.0 × 2200.0
Weight 5000 kg

Here is a selection of similar machines


Similar machines sold on Exapro

DAEWOO Puma 12L CNC Lathe
DAEWOO Puma 12L CNC Lathe Sold

Year: 1988

Maximum Bar Capacity 65mm Maximum Diameter through Chucking Cylinder 52mm Rapid Traverse X 12m/min. Rapid Traverse Z 16m/min.

Price on request

GB United Kingdom


Gebrauchte CNC Drehmaschine DAEWOO Puma 12L
Gebrauchte CNC Drehmaschine DAEWOO Puma 12L Sold

Year: 1999

Drehdurchmesser : 580 mm Drehlänge : 1020 mm Steuerung : FANUC 15 T Stangendurchmesser : 75 mm Eilgang : 5/10 m/min Drehzahl : 20-2500 U/min Spindelnase : ASDA-A2++8 Spindelbohrung : 90 mm Revolver : 10-fach Maschinengewicht ca. : 6,3 t Raumbedarf ca. : 3,5x2,1x2,1 m Spänefördererer Maschine wurde 2006 überholt. Maschine ist in sehr gutem Zustand.

Price on request

DE Germany


DAEWOO PUMA 12L Cnc lathe
DAEWOO PUMA 12L Cnc lathe Sold

Year:

Price on request

IT Italy


Used DAEWOO PUMA 12L Cnc lathe
Used DAEWOO PUMA 12L Cnc lathe Sold

Year: 1990

Price on request

IT Italy


Used DAEWOO PUMA 12LB. Cnc Lathe, w/ Fanuc 16T CNC Control
Used DAEWOO PUMA 12LB. Cnc Lathe, w/ Fanuc 16T CNC Control Sold

Year: 1994

MACHINE SPECS: CONTROL: FANUC MAXIMUM SWING: 22" TURN DIAMETER: 19" MACHINING LENGTH: 40" BAR CAPACITY: 3.5" CHUCK SIZE: 12" MAIN MOTOR: 35HP TURRET POSITION: 10 LIVE TOOLING/MILLING: NO EQUIPPED WITH: Fanuc 16T CNC Control Tailstock Chip Conveyor 12” Hydraulic Chuck with est. 3” Hole

Price on request

US USA


Used Daewoo Puma 12 L Cnc lathe
Used Daewoo Puma 12 L Cnc lathe Sold

Year: 1994

Price on request

IT Italy


Daewoo Puma 12L Cnc lathe
Daewoo Puma 12L Cnc lathe Sold

Year: 1994

2-axis lathe Daewoo Puma 12 l 450x1200 Turning asa mechanical range gear 11 12 Tools tailstock chip presetting evacuator CNC fanuc 0-T year 1994 MINT CONDITION

Price on request

IT Italy


CNC LATHE DAEWOO PUMA 12 L
CNC LATHE DAEWOO PUMA 12 L Sold

Year: 1995

max turning diameter 375 mm max turning length 1020 mm max diameter over bed 570 mm Bar passage 75 mm Spindle nose ASA 8 Rotation speed 2500 g / min Rapid X axis 10 m / min Rapid Z-axis 16 m / min 10-position turret chip conveyor CNC FANUC 0 T

Price on request

IT Italy


Daewoo Puma 12L
Daewoo Puma 12L Sold

Year: 1988

CNC lathe, Fanuc 10TF, 305mm power chuck, swarf conveyor, tooling, 75mm bore, speeds to 2500rpm, 304 x 1020mm capacity. Nice condition.

Price on request

GB United Kingdom


Daewoo Puma 12 cnc lathe
Daewoo Puma 12 cnc lathe Sold

Year:

Turning length : 800 mm Turning diameter : 305 mm Fanuc control unit Machine is in good condition

Price on request

GB United Kingdom


Used Daewoo Puma 12 L cnc lathe
Used Daewoo Puma 12 L cnc lathe Sold

Year:

Used Daewoo Puma 12 L cnc lathe The machine has been tested and is fully functional and respects the precision required in normal mechanical processes, equipped with various equipment as well as instructions, maintenance and CE certification from the manufacturer. Numerical control Fanuc 0T, spindle hole 78 mm, distance between centers 1020 mm 10-position tool turret complete with tool holder, hydraulic tailstock, chip conveyor, hydraulic chuck 315 mm 3 jaws

Price on request

IT Italy


Daewoo Puma Puma 12L-C cnc lathe
Daewoo Puma Puma 12L-C cnc lathe Sold

Year: 1996

Machine is in good condition Fanuc control unit

Price on request

FI Finland


DAEWOO PUMA 12LB cnc lathe
DAEWOO PUMA 12LB cnc lathe Sold

Year: 1996

The DAEWOO PUMA 12LB 2-axis cnc lathe used is a medium / large-sized 2-axis numerical control lathe with inclined bench with 1050mm center distance, ASA 8 ″ spindle nose and maximum bar passage of 91mm; year of construction 11.1996, (installation 1997) “CE” standards, with FANUC 0-T cnc. It is equipped with a 305mm hydraulic chuck with a 26Kw spindle motor, an automatic tool change turret with 10 positions (with relative tool holders) and is complete with tailstock, tool setter, swarf …

Price on request

IT Italy


Used DAEWOO PUMA 12L. Cnc Lathe, w/ TAILSTOCK PROGRAMMABLE
Used DAEWOO PUMA 12L. Cnc Lathe, w/ TAILSTOCK PROGRAMMABLE Sold

Year: 1995

MACHINE SPECS: CONTROL: FANUC MAXIMUM SWING: 22.5" TURN DIAMETER: 18.9" MACHINING LENGTH: 60" BAR CAPACITY: 3" CHUCK SIZE: 12" MAIN MOTOR: 40HP TURRET POSITION: 10 LIVE TOOLING/MILLING: NO EQUIPPED WITH: CHUCK SIZE 12” 2-­‐3-­‐JAW ($20K CUSHMAN CHUCK) TAILSTOCK PROGRAMMABLE (QUILL) CHIP CONVEYOR

Price on request

US USA


Used Daewoo, Model Puma 12L. Cnc Lathe, w/ Fanuc 11T Cnc Control
Used Daewoo, Model Puma 12L. Cnc Lathe, w/ Fanuc 11T Cnc Control Sold

Year: 1988

Specification Swing Over Bed 20.5" Swing Over Cross-Slide 13.8" Between Centers 42" Max. Dia stock through 3" Spindle Speed Range 226~678 Low, 833~2500 High Turret Positions 10 Motor Power 20 HP X-axis Travel 19" Z-axis Travel 39.5" Equipped With: Fanuc 11T Cnc Control 12" Chuck Tailstock

Price on request

US USA


Used DAEWOO PUMA 12LC. Cnc Lathe, w/ Fanuc O-T CNC Control
Used DAEWOO PUMA 12LC. Cnc Lathe, w/ Fanuc O-T CNC Control Sold

Year: 1994

MACHINE SPECS: CONTROL: FANUC MAXIMUM SWING: 22.4" TURN DIAMETER: 19" MACHINING LENGTH: 40" BAR CAPACITY: 4.46" CHUCK SIZE: 15" MAIN MOTOR: 35HP TURRET POSITION: 12 LIVE TOOLING/MILLING: NO EQUIPPED WITH: Fanuc O-T CNC Control Tailstock Chip Conveyor 15” Hydraulic Chuck with 3” Hole

Price on request

US USA


Daewoo PUMA 12 L cnc lathe
Daewoo PUMA 12 L cnc lathe Sold

Year: 1996

max. turning diameter 375mm; max. Rotating diameter of 570mm bench; max. turning length 1020mm; ASA spindle 8; speed 2500 rev / min; 75mm bar passage; turret tool 10 positions; chip conveyor; cnc FANUC 0T

Price on request

IT Italy


Used DAEWOO PUMA 12 LB. Cnc Lathe, w/ Fanuc 15T Cnc Control
Used DAEWOO PUMA 12 LB. Cnc Lathe, w/ Fanuc 15T Cnc Control Sold

Year: 1994

Specifications CHUCK SIZE:.......................12" MAXIMUM SWING OVER BED:...........22.4" SWING OVER CARRIAGE:..............14.6" X AXIS TRAVEL:....................10.2" Z AXIS TRAVEL:....................41.3" MAXIMUM BAR CAPACITY:.............3.58" SPINDLE MOTOR:....................35 HP TURRET CAPACITY:..................12 STATION TURRET ****EQUIPPED WITH:**** FANUC 15T CNC CONTROL 12" 3-JAW HYDRAULIC CHUCK TAILSTOCK CONVEYOR

Price on request

US USA


Used 1994 Daewoo Puma 12LB CNC Turning Center
Used 1994 Daewoo Puma 12LB CNC Turning Center Sold

Year: 1994

MAX. SWING 22.4" MAX. TURNING DIA. 19" MAX SHAFT LENGTH 41.3" SPINDLE BORE DIA. 4.1" MAX BAR CAPACITY 4.1" X-AXIS TRAVEL 10.2" Z-AXIS TRAVEL 41.3" SPINDLE NOSE A2-8" SPINDLE SPEEDS 20 - 2500 RPM SPEED RANGES 2 SPEED TURRET CONFIGURATION 10 RAPID TRAVERSE 480/630 IPM TAIL STOCK DIA. MT #5 TAIL STOCK QUILL STROKE 4.0" MAIN MOTOR 35 HP AC MACHINE WEIGHT 17,380 LBS. EQUIPPED WITH FANUC OTC CNC CONTROL 12" HYDRAULIC CHUCK (NEW) PROGRAMMABLE TAILSTOCK CHIP CONVEYOR ALL AVAILABLE …

Price on request

US USA


Used Daewoo PUMA 12L cnc lathe
Used Daewoo PUMA 12L cnc lathe Sold

Year: 1994

TECHNICAL DATASHEET DAEWOO PUMA 12L Government unit: Fanuc CAPACITY Maximum vault: 570 Machinable diameter / Standard machinable diameter: 375 Maximum workable length * 1: 1020 template.product_sheet_technic_capacity_distance_madretti_madrini: 1400 Bar capacity Bar capacity: 75 RACING X axis: 260 Z axis: 1050 MAIN SPINDLE Self-centered dimensions: 315 Spindle speed: 2500 Spindle nose: ASA 2-8 Spindle hole: 85 TOWER Turret type: BMT75 Number of tools: 10 ADVANCEMENT Fast forward speed: X axis: 12000 Fast forward speed: Z axis: 16000 MACHINE DIMENSIONS Machine height: 2000 …

Price on request

IT Italy


Daewoo Puma 12 L cnc lathe
Daewoo Puma 12 L cnc lathe Sold

Year: 1996

CNC DAEWOO PUMA 12 L okarka was produced in 1996. The machine is after renovation. Currently, the encoder and spindle belts were replaced and adjusted. The lathe is equipped with a chip conveyor from Mayfran GmbH. - CNC control: FANUC Series O-T - turning diameter over the bed: 570 mm - recommended turning diameter: 320 mm - turning length: 1020 mm - spindle chuck size (model): 305 mm (B12) - cylinder I.D. : fi 78 mm - cylinder model: F2078H …

Price on request

PL Poland


Daewoo Puma 12L Cnc lathe
Daewoo Puma 12L Cnc lathe Sold

Year: 1996

Bar Capacity: 77mm Chuck Size: 315mm Control: FANUC OTC Distance Between Centres: 1020mm Maximum Cutting diameter: 480mm Spindle Motor Power: 22kW through 2 Speed gearbox Spindle Speed: 3500mm Swing: 571mm Turret Positions: 10 Station Description: Coolant, Tailstock, Interlocked guards, 3 Jaw Chuck, Swarf Conveyor

Price on request

GB United Kingdom


Daewoo Puma 12L Cnc lathe
Daewoo Puma 12L Cnc lathe Sold

Year:

Swing over bed 480 mm Distance centre tot centre 1020 mm Dia of spindle bore 77 mm Power on the spindle 22 kW Number of speeds 2500 rpm Command Fanuc Chuck 305 mm Toolchanger yes

Price on request

BE Belgium


Used DAEWOO PUMA 12LC Vertical turning lathe, 18" Chk, 4.5" HOLE, 22.4" SWING
Used DAEWOO PUMA 12LC Vertical turning lathe, 18" Chk, 4.5" HOLE, 22.4" SWING Sold

Year: 1997

SPECIFICATIONS MAX. SWING: 22.4" MAX. TURNING DIA.: 19" MAX SHAFT LENGTH: 41.3" SPINDLE BORE DIA.: 5.1" MAX BAR CAPACITY: 4.5" X-AXIS TRAVEL: 10.2" Z-AXIS TRAVEL: 41.3" SPINDLE NOSE: A2-11" SPINDLE SPEEDS: 20 - 2000 RPM SPEED RANGES: 2 SPEED TURRET CONFIGURATION: 10 RAPID TRAVERSE: 480/630 IPM TAIL STOCK DIA.: MT #5 TAIL STOCK QUILL STROKE: 4.0" MAIN MOTOR: 35 HP AC EQUIPPED WITH FANUC OTC CNC CONTROL 18" 3-JAW HYDRAULIC CHUCK W/ 4.5" THRU HOLE PROGRAMMABLE TAILSTOCK CHI CONVEYOR ALL …

Price on request

US USA


Used Daewoo Puma 12L C cnc lathe
Used Daewoo Puma 12L C cnc lathe Sold

Year: 1995

Chuck Size 16.5" Max Diameter Bar Capacity 5.2" Max Swing Over Bed / Carriage 22.4" / 14.6" Max Turning Diameter 19" Max Machining Length 40.2" Spindle Speed 20 - 2000 RPM Spindle Bore 5.2" Spindle Nose A2-11 Spindle Motor 35 / 30 HP Spindle Torque 1009 ft. lbs. Tools 12 Rapid Traverse Rates (X / Z) 480 / 630 IPM X-Axis Travel 10.2" Z-Axis Travel 41.3" Tailstock Taper MT#5 Machine Dimensions (L x W x H) 141" x 87" x …

Price on request

US USA


Daewoo Puma 12 L Cnc lathe
Daewoo Puma 12 L Cnc lathe Sold

Year:

Passage max above the bed: 480 mm Distance between centers: 1020 mm Passage in the spindle: 77 mm Power on the spindle 22kW Number of speed: 2500 rpm Control: FANUC Chuck 3/4 jaw - pitches: 305 mm Changer tool holders

Price on request

FR France


DAEWOO PUMA 12L Cnc lathe
DAEWOO PUMA 12L Cnc lathe Sold

Year:

SWING OVER CARRIAGE mm. 483 DIAMETER MAIN HOLE mm. 89

Price on request

ES Spain


DAEWOO PUMA 12 CNC Turning Centre
DAEWOO PUMA 12 CNC Turning Centre Sold

Year: 1992

Control:FANUC 15T 3-jaw chuck:315mm Between centres:1200mm Max.turning length:1020mm Swing over bed:570mm Spindle bore:75mm

Price on request

BE Belgium


Daewoo Puma 12L cnc lathe
Daewoo Puma 12L cnc lathe Sold

Year: 1997

Year: 1997 Make: Daewoo Model: PUMA 12L Bar Capacity: 77mm Chuck Size: 315m Control: FANUC OTC Distance Between Centres: 1020mm Maximum Cutting diameter: 480mm Spindle Motor Power: 22kW through 2 Speed gearbox Spindle Speed: 3500mm Swing: 571mm Turret Positions: 10 Station Description: Coolant, tailstock, Interlocked guards, 3 Jaw Chuck Swarf Conveyor

Price on request

GB United Kingdom


Used DAEWOO, Model PUMA 12L. Cnc Lathe, w/ Fanuc 15T CNC Control
Used DAEWOO, Model PUMA 12L. Cnc Lathe, w/ Fanuc 15T CNC Control Sold

Year: 1990

EQUIPPED WITH 12" 3-Jaw Kitagawa Chuck, Misc. Tool Holders Coolant System Fanuc 15T CNC Control SPECIFICATIONS Maximum Cutting Diameter 12" Over Bed22.8 Over Carriage13.8 Maximum Cutting Length40.2" Hole Though Spindle 3.5" Maximum Bar Work Diameter3" Travels X-Axis Travel10.2" Z-Axis Travel 41.3" Rapid Traverse X-Axis200 IPM Z-Axis400 IPM No. Of Tools on Turret10 (5 OD & 5 ID) Tailstock Quill Diameter4.3" Quill Stroke4" Tailstock Center4 MT Motors Main Spindle Motor25/30 HP X-Axis Servo Motor1.5 HP Z-Axis Servo Motor2.5 HP Hydraulic Motor3 …

Price on request

US USA


Daewoo Puma 12L cnc lathe
Daewoo Puma 12L cnc lathe Sold

Year: 1997

Year: 1997 Make: Daewoo Model: Puma 12L Bar Capacity: 77mm Chuck Size: 315mm Control: FANUC OTC Distance Between Centres: 762mm Maximum Cutting diameter: 480mm Spindle Motor Power: 22kW through 2 Speed gearbox Spindle Speed: 3500mm Swing: 571mm Turret Positions: 10 Station Description: Coolant, Tailstock, Interlocked guards, 3 Jaw Chuck, Swarf Conveyor

Price on request

GB United Kingdom


Tour horizontal DAEWOO PUMA 12L CNC FANUC OT d occasion
Tour horizontal DAEWOO PUMA 12L CNC FANUC OT d occasion Sold

Year: 1996

Passage utile 480 Longueur usinable 1050 Diamètre de barres 100 Tourelle (nbre de postes) 10 outils Puissance à installer 22 Kw Course X 260 Course Z 1050 Vitesse de broche 3000 trs/mn Puissance de broche 22 Kw Avance rapide axe X 12 m/mn Avance rapide axe Z 16 m/mn Equipement: convoyeur à copeaux 2 mandrins 3 mors diamètre 300 et 450

Price on request

FR France


DAEWOO PUMA 12L cnc lathe
DAEWOO PUMA 12L cnc lathe Sold

Year: 1996

CNC lathe with FANUC series O-T control Turnable surface: Ø 320mm Maximum turning length: 1050mm Bar Capacity: 77mm X axis: 260 mm Z axis: 1050 mm Spindle speed: 2500 rpm Number of tools: 10 Fast forward speed: X axis: 12000mm / min Fast forward speed - Z axis: 16000mm / min Absorbed power: 45kVA With counterpoint Includes chip conveyor Documentation available

Price on request

ES Spain


Daewoo Puma 12L cnc lathe
Daewoo Puma 12L cnc lathe Sold

Year: 1992

Turning length : 1020 mm Fanuc control unit Machine is in good condition

Price on request

TR Turkey


DAEWOO PUMA 12L Cnc lathe
DAEWOO PUMA 12L Cnc lathe Sold

Year: 1994

2-axis lathe Daewoo Puma 12L turning 450x1200 asa 11 mechanical gear change 12 tools tailstock chip conveyor presetting CNC Fanuc 0-T 1994 GOOD CONDITION

Price on request

IT Italy


Used DAEWOO PUMA 12 Cnc lathe
Used DAEWOO PUMA 12 Cnc lathe Sold

Year:

Price on request

IT Italy


Daewoo Puma 12LC
Daewoo Puma 12LC Sold

Year: 1995

Machine Type: CNC Lathes Year: 1995 Manufacturer: Daewoo Model: Puma 12LC Control: Fanuc 16T Condition: Used Code: L2150 Capacity: Swing: 22" Maximum Turning Diameter: 19" Distance Between Centers: 40" Spindle: Spindle Speeds: 15 - 2000 RPM Spindle Bore: 5.2" Spindle Nose: A1-11 Main Motor: 40 HP Turret: Number of Positions: 12 Z-Axis Travel: 41" Equipped With: 15" 3 jaw chuck Chip conveyor

Price on request

US USA

Are you looking for this machine?

Contact us