Daewoo Pan 20

Manufacturer	Daewoo
Model	Pan 20
Category	Lathes - cnc lathes

View current offers

Specifications

Spindle taper	A2-8
Spindle bore	76.2 mm
Number of turrets	6
Turning speed	2500 rpm
Tailstock	no
Bar feeder	no
-------------------
Length x width x height	508.0 × 1524.0 × 1524.0
Weight	1814.9 kg

Used Daewoo, Model Pan 20 Cnc lathe Sold

Year: 1987

Specifications Fanuc l0T Control Specifications: Swing over bed: 20.5” Swing over cross slide: ll.8” Max. cutting dia.: ll.8” Max. bar work dia. : 2.5” Max. cutting length: 52.6” Bed center distance: 59.l” Width of bed: l6.5” Center height over bed: l0.6” Center height over floor: 43.7” Spindle bore taper: 3.3, l/20 Spindle center: MT #5 Spindle dia. /Front brg.: 4.7 Spindle speed change: 3 Step Rapid traverse ‘X’: l97” /min ‘Z’: 394” / min Stroke ‘X’: 14.2” ‘Z’: 54.5 No. …

Price on request

USA

Used DAEWOO Pan 20 Cnc lathe Sold

Year:

Control: Fanuc 6T Swing over Bed: 20" Swing Over Ways: 26" Distance Between Centers: 60" Chuck Size: Kitagawa 12" 3-Jaw Chuck Spindle Bore: 2-1/2" Tailstock: Hydraulic with pressure control Turret: 5 Station Tool Post: Quick Change, 4 position tool post Coolant System Needs Work: This machine needs the Spindle Controller board replacing - Fanuc # A-20-B - 0008. Other than that, the machine is in good condition. 2 machines available one runs good other needs some work..

Price on request

USA

Used DAEWOO Pan 20. Cnc Flat Bed Lathe, w/ Fanuc 6T Control Sold

Year:

General Description Control: Fanuc 6T Swing over Bed: 20" Swing Over Ways: 26" Distance Between Centers: 60" Chuck Size: Kitagawa 12" 3-Jaw Chuck Spindle Bore: 2-1/2" Tailstock: Hydraulic with pressure control Turret: 5 Station Tool Post: Quick Change, 4 position tool post Coolant System Comments: Needs Work: This machine needs the Spindle Controller board replacing - Fanuc # A-20-B - 0008. Other than that, the machine is in good condition. 2 machines available one runs good other needs some work..

Price on request

USA

Used Daewoo Pan 20. Cnc Lathe, w/ Fanuc 10 T Control Sold

Year: 1987

Specification Control Fanuc 10 T Swing Over Ways 21" Swing Over Cross Slide 11" Cross Slide Travel Y Axis 6" Center Distance 6-" Spindle Thru Hole 2" Spindle Motor 10Hp. Chuck Size 12"3 - Jaw Front Turret 6 Stations Rear Turret 4 Stations Coolant Yes Manual Tail Stock With Programmable Quill Yes Note: Machine Was Just Removed From Service.

Price on request

USA

20" X 60" Daewoo CNC Lathe Sold

Year: 1987

Specification Description Control Fanuc 10 T Swing Over Ways 21" Swing Over Cross Slide 11" Cross Slide Travel Y Axis 6" Center Distance 6-" Spindle Thru Hole 2" Spindle Speeds (16) 37.5 To 3,000 Rpm's Spindle Nose A2-8 Spindle Motor 10Hp. Chuck Size 12"3 - Jaw Front Turret 6 Stations Rear Turret 4 Stations Machine Weight 4,000 Lbs Machine Dimensions 108" Left To Right 60" Front To Back 60" High Coolant Yes Manual Tail Stock With Programmable Quill Yes Note: …

Price on request

USA

Used DAEWOO PAN 20. Cnc Flat Bed Lathe, w/ Fanuc 10T Control Sold

Year: 1990

MACHINE SPECS: CONTROL: FANUC MAXIMUM SWING: 20" MACHINING LENGTH: 60" CHUCK SIZE: 12" MAIN MOTOR: 15HP LIVE TOOLING/MILLING: NO EQUIPPED WITH: Fanuc 10T

Price on request

USA

Daewoo Pan 20

Here is a selection of similar machines

Here is a selection of similar machines

Similar machines sold on our website

Categories

Menu

Are you looking for this machine?