Daewoo Lynx 210B

Manufacturer Daewoo
Model Lynx 210B
Category Lathes - cnc lathes

Here is a selection of similar machines

Turning length 300 mm
Turning Ø 280 mm
Ø above the bed 460 mm
Ø above transversing slide 348 mm
Length between centers 320 mm
Type of CNC Fanuc 0iT
X-axis 160 mm
Z-axis 330 mm
Max workpiece weight  kg
Spindle taper A2-6
Spindle bore 52.8 mm
Number of turrets 1
Number of tools on turret 12
Number of rotating tools
Turning speed 4500 rpm
Spindle motor power 7.5 kW
Tailstock no
Bar feeder no
-------------------
Length x width x height 1620.0 × 1600.2 × 1550.0
Weight 3170 kg

Here is a selection of similar machines


Similar machines sold on Exapro

DAEWOO LYNX210 CNC lathe
DAEWOO LYNX210 CNC lathe Sold

Year: 2002

Price on request

CZ Czech Republic


Verkauf: CNC Drehmaschine DAEWOO LYNX 210 L
Verkauf: CNC Drehmaschine DAEWOO LYNX 210 L Sold

Year: 2004

Reitstockkonus Morse 4 12 Positionen

Price on request

DE Germany


Used Daewoo Lynx 210C. Cnc Lathe, w/ Fanuc 21i-TB CNC Control
Used Daewoo Lynx 210C. Cnc Lathe, w/ Fanuc 21i-TB CNC Control Sold

Year: 2003

Specifications: Swing Over Bed.................................... 20.1" Swing Over Carriage............................. 13.7" Chuck Diameter.................................... 8" Spindle Motor........................................15 HP Bar Capacity......................................... 2.5" Turret....................................................12 Station Rapid Traverse X/Z Axes....................... 790/945 IPM X-Axis Travel......................................... 6.3" Z-Axis Travel......................................... 20.9" Equipped With: Fanuc 21i-TB CNC Control 8" 3-Jaw Hydraulic Chuck 12 Station Turret RS-232C Port Tool Presetter Tail Stock Chip Conveyor *** Spindle Just Rebuilt ***

Price on request

US USA


Used Daewoo Lynx 210C. Cnc Lathe, w/ Fanuc 21i-TB CNC Control
Used Daewoo Lynx 210C. Cnc Lathe, w/ Fanuc 21i-TB CNC Control Sold

Year:

Specifications: Swing Over Bed.................................... 20.1" Swing Over Carriage............................. 13.7" Chuck Diameter.................................... 8" Spindle Motor....................................... 15 HP Bar Capacity......................................... 2.5" Turret....................................................12 Station Rapid Traverse X/Z Axes....................... 790/945 IPM X-Axis Travel......................................... 6.3" Z-Axis Travel......................................... 20.9" Equipped With: Fanuc 21i-TB CNC Control 8" 3-Jaw Hydraulic Chuck 12 Station Turret RS-232C Port Tool Presetter Tail Stock Chip Conveyor

Price on request

US USA


DAEWOO LYNX 220A,6"CHK,1.75"BAR,12-STATION,TAILSTOCK,6,000 RPM,21-T,NEW-1998
DAEWOO LYNX 220A,6"CHK,1.75"BAR,12-STATION,TAILSTOCK,6,000 RPM,21-T,NEW-1998 Sold

Year: 1998

SWING OVER BED .......................... 20.1" SWING OVER SADDLE ....................... 13.7" MAXIMUM TURNING DIAMETER ................ 11.0" MAXIMUM TURNING LENGTH .................. 12.7" BAR CAPACITY ............................ 1.75" X-AXIS TRAVEL ........................... 6.51" Z-AXIS TRAVEL ........................... 13" SPINDLE SPEEDS .......................... 6,000 RPM SPINDLE NOSE ............................ A2-5 SPINDLE NOSE DIAMETER ................... 2.09" TURRET .................................. 12 STATIONS RAPID TRAVERSE X/Z ...................... 790/945 IPM QUILL DIAMETER .......................... 2.6" QUILL TAPER ............................. MT#4 QUILL TRAVEL ............................ 2.1" SPINDLE MOTOR ........................... 10 HP MACHINE DIMENSIONS ...................... 61" X 66" X …

Price on request

US USA


0L2150 LATHES, COMBINATION, N/C & CNC  2002 DAEWOO LYNX 210 LC, FANUC 21iT
0L2150 LATHES, COMBINATION, N/C & CNC 2002 DAEWOO LYNX 210 LC, FANUC 21iT Sold

Year:

Specifications: Control:Fanuc 21iT Swing Over Bed:20.1” Max Turning Length:20” Maximum Turn Diameter:11” Bar Capacity:2.5” Spindle Nose:ASA A2-6 Spindle Speeds:4,500 RPM Number of Turret Positions:12 Floor Space (L x W):64” x 63” Machine Weight:7,700 Lb Equipped With: Fanuc 21iT Control Parts Catcher 8" Chuck Tailstock

Price on request

US USA


Daewoo Lynx 210 cnc lathe
Daewoo Lynx 210 cnc lathe Sold

Year: 2004

Additional Equipment: Single Tube Barfeed Available Bar Capacity: 52mm Chuck Size: 165mm Control: Fanuc 0iT Description: Tool setter, Tailstock, Interlocked guards, Barfeed, Collet Chuck, Parts Catcher, Tooling

Price on request

GB United Kingdom


Daewoo Lynx 210 Cnc lathe
Daewoo Lynx 210 Cnc lathe Sold

Year: 2004

Year: 2004 Make: Daewoo Model: Lynx 210 Additional Information: Can be supplied with full length single tube barfeed. Ask for info. Bar Capacity: 52mm Chuck Size: 165mm Control: Fanuc 0iT Description: Tool setter, Tailstock, Interlocked guards, Collet Chuck, Parts Catcher, Tooling, Can be fitted with Barfeed.

Price on request

GB United Kingdom


Daewoo Lynx 210B cnc lathe
Daewoo Lynx 210B cnc lathe Sold

Year: 2004

Year: 2004 Make: Daewoo Model: Lynx 210B Bar Capacity: 51mm Chuck Size: 200mm Control: FANUC OiT Maximum Cutting diameter: 280mm Maximum Cutting Length: 305mm Spindle Motor Power: 11kW Spindle Speed: 5000rpm Swing: 508mm Tool Change Capacity: 12 Station Description: Tool setter, Coolant, Tailstock, Interlocked guards, Low Volt Light, 3 Jaw Chuck, Parts Catcher, Swarf Conveyor

Price on request

GB United Kingdom


Daewoo Lynx 210B cnc lathe
Daewoo Lynx 210B cnc lathe Sold

Year: 2002

The machine is in good tech.stavu, in agreement tours running. Technical parameters: Number of axes: 2 Number of tool positions: 12 Max. turning diameter: 280 mm Max. turning length: 305 mm spindle passage: 52 mm Control system: FANUC-21iT Machine weight: 3170 kg

Price on request

CZ Czech Republic


Used Daewoo Lynx 210C. Cnc Turning Center, w/ Fanuc 21iTB CNC Control
Used Daewoo Lynx 210C. Cnc Turning Center, w/ Fanuc 21iTB CNC Control Sold

Year: 2003

Specifications: Swing Over Bed............................ 20.1" Swing Over Carriage....................... 13.7" Chuck Diameter............................ 8" Spindle Motor............................. 15 HP Bar Capacity.............................. 2.5" Turret.................................... 12 Station Rapid Traverse X/Z Axes................... 790/945 IPM X-Axis Travel............................. 6.3" Z-Axis Travel............................. 20.9" Equipped With: Fanuc 21i-TB CNC Control 8" 3-Jaw Hydraulic Chuck 12 Station Turret RS-232C Port Tool Presetter Tail Stock Chip Conveyor

Price on request

US USA


Daewoo LYNX 210B cnc lathe
Daewoo LYNX 210B cnc lathe Sold

Year: 2001

Daewoo Lynx 210B CNC Lathe. 280 x 300mm Capacity. Spindle bore 51mm. Spindle speed 0-4000rpm. Equipped with Fanuc 21i CNC Control. Many other options fitted to the Daewoo Lynx Lathe making this a well equipped machine for sale Specification Daewoo Lynx 210B CNC Capacity Swing over Bed 460mm Swing over Saddle 350mm Recommended Machining Dia 210mm Maximum Machining Dia 280mm Maximum Work Length 300mm Draw Tube Dia 51mm Travels X Axis 160mm Z Axis 330mm Spindle Chuck dia 210mm Speed …

Price on request

GB United Kingdom


Daewoo Lynx 210 Cnc lathe
Daewoo Lynx 210 Cnc lathe Sold

Year: 2004

Additional Equipment:Single Tube Barfeed Available Bar Capacity:52mm Chuck Size:165mm Control:Fanuc 0iT Description: Tool setter, Tailstock, Interlocked guards, Barfeed, Collet Chuck, Parts Catcher, Tooling

Price on request

GB United Kingdom


Daewoo Lynx 210 b cnc lathe
Daewoo Lynx 210 b cnc lathe Sold

Year: 2003

Two-axle lathe of Daewoo brand model Lynx 210 B Present accessories: carpet conveyor evacuator - tool presetting - hand-picking machine Tower: Stations on tower 12 pos. Dimensions of turning tools / bending 25x25 / diam .40 mm Tailstock: diam. barrel 65 mm. - C.M. 4

Price on request

IT Italy


DAEWOO LYNX 210 CNC lathe
DAEWOO LYNX 210 CNC lathe Sold

Year: 2002

Max turning diameter: 280 mm Turning diameter over bed: 460 mm Turning length: 300 mm Spindle hole diameter: 45 mm X/Z travel: 160/330 mm Revolver head: 12 pcs. Spindle r.p.m. range: 60 - 6 000 r.p.m. Engine power: 7,5 kW Overall power demand: 25 kVA Control: CNC FANUC 21i-T Machine weight: 3 200 kg

Price on request

PL Poland


Daewoo Lynx 210B cnc lathe
Daewoo Lynx 210B cnc lathe Sold

Year:

Tool setter, Coolant, Tailstock, Interlocked guards, Low Volt Light, Magazine Barfeed, Collet Chuck, Parts Catcher Control FANUC Oi Series Swing 460mm Bar Capacity 51mm Maximum Cutting diameter 280mm Maximum Cutting Length 305mm Turret Positions 12 Station Spindle Motor Power 7.5kW Spindle Nose A2-6 Spindle Speed 4000rpm Tailstock Quill Diameter 65mm Tailstock Quill Stroke 80mm Tailstock Taper MT #4 Barfeed Hydrafeed ML-1 X axis Travel 160mm Z axis Travel 330mm Machine Dimensions 1620 x 1590 x 1550mm Machine Weight 3170kg

Price on request

GB United Kingdom


DAEWOO LYNX 210 A cnc lathe
DAEWOO LYNX 210 A cnc lathe Sold

Year: 2004

DEAWOO TOUR LYNX 210 A Year 2004 CN Fanuc i series Max. Crossing over the bench: 460 [mm] Max turning diameter: 280 [mm] Max diameter in bar: 45 [mm] Spindle speed: 40 - 4000 [rpm] Spindle power: 7.5 [KW] Races: X: 160 {mm] Races: Z: 330 [mm] Turret: 10 positions Advanced against

Price on request

FR France

Are you looking for this machine?

Contact us