Daewoo Lynx 200LC

Manufacturer	Daewoo
Model	Lynx 200LC
Category	Lathes - cnc lathes

View current offers

Specifications

Turning length	300 mm
Turning Ø	280 mm
Ø above the bed	460 mm
Ø above transversing slide	350 mm
Length between centers	609.6 mm
Type of CNC	Fanuc 21-T
X-axis	160 mm
Z-axis	330.2 mm
Max workpiece weight	kg
Spindle taper	A2-5
Spindle bore	52 mm
Number of turrets	1
Number of tools on turret	10
Number of rotating tools	10
Turning speed	4500 rpm
Spindle motor power	7.5 kW
Tailstock	no
Bar feeder	no
-------------------
Length x width x height	1620.0 × 1590.0 × 1651.0
Weight	3176 kg

Daewoo LYNX 200LC Cnc lathe Sold

Year:

Control SIEMENS 802 D Swing over bed 460 mm Swing over saddle 350 mm Max turning diameter 280 mm Max turning length 500 mm Chuck diameter 210 mm Spindle bore A2-6 Spindle motor speed 45-4 500 rpm Spindle motor power 9/11 kW Positions in turret 10 Rapid traverse X 20 m/min Rapid traverse Z 24 m/min Year of Manufacture 2004

Price on request

Sweden

Used DAEWOO, Model LYNX 200LC. Cnc lathe, w/ Coolant System Sold

Year: 2002

Specifications Swing Over Bed: 20.1” Swing Over Carriage: 13.7” Chuck Diameter: 8.25” Spindle Motor: 10/15 HP Bar Capacity: 2.5” Rapid Traverse – X Axis 790 IPM Rapid Traverse – Z Axis 945 IPM Travel – X Axis 6.3” Travel – Z Axis 20.9” Dimensions: Length 77” Depth: 63” ****EQUIPMENT & fEATURES**** Manual Tool Setter Parts Catcher Coolant System Oil Skimmer Tailstock – Programmable Quill Manuals Miscellaneous Tool Holders Chip Conveyor

Price on request

USA

Used DAEWOO Lynx 200LC Cnc lathe Sold

Year: 1999

FANUC 21iTB CNC CONTROL WITH 9" LCD SCREEN RS-232 PORT INTERFACE FOR DNC OPERATION 8.00" KITAGAWA B-208 3-JAW CHUCK THRU HOLE CHUCK PARTS CATCHER, TOOL PRE-SETTER RIGHT HAND DISCHARGE LIFT-UP CHIP CONVEYOR FULLY ENCLOSED SPLASH & SAFETY GUARDING ATE OF MANUFACTURE/INSTALLED 12/1999 / 2000 SWING OVER BED 20.10" SWING OVER CARRIAGE 13.78" MAX. TURNING DIAMETER 11" MAX. TURNING LENGTH 20" X AXIS TRAVEL 6.3" Z AXIS TRAVEL 20.90" RAPID TRAVERSE RATE X/Z AXES 787/944 SPINDLE NOSE A2-6 SPINDLE SPEEDS 45 …

Price on request

Canada

DAEWOO LYNX 200LC cnc lathe Sold

Year: 2000

Year 2000 CN Fanuc 21 Max cutting diameter: ø 250 mm Max cutting length: 510 mm Passage in bars: ø 65 mm Spindle speed: 4500 rpm Spindle power: 15 kw Turret 12 positions Coin recuperator Chip conveyor KTech bar feeder type RS-565 Measuring arms tools Pin hours 3500h

Price on request

France

Daewoo Lynx 200LC cnc lathe Sold

Year: 2000

Control: Mitsubishi Maximum swing: 18" Turn diameter: 11" Machining length: 20" Spindle bore: 2.9" Bar capacity: 2.6" Chuck size: 8" Spindle speed: 4500 rpm Main motor: 15 hp Turret position: 12 Live tooling/milling: no Equipped with: Mitsubishi Meldas 64 8” chuck Tailstock Chip conveyor

Price on request

USA

Used Daewoo Lynx 200LC. Cnc Turning Center, w/ Fanuc 21i-T CNC Control Sold

Year: 2001

Specification Swing Over Bed 20.1" X-Axis Travel 6.9" Z-Axis Travel 21.7" Rapid Traverse Rate X/Z-Axes 1181/1417 IPM Spindle Motor 15 HP Bar Capacity 2.625" Number of Turret Tool Stations 12 Equipped With: Fanuc 21i-T CNC Control Barfeeder Interface Parts Catcher Hydraulic Tailstock Chip Conveyor 8" 3-Jaw Thru Hole Hyd. Chuck 12-Station Turret RS-232C Port Work Light Coolant System Foot Pedal Control All Available Tool Holders All Available Manuals

Price on request

USA

Daewoo Lynx 200LC cnc lathe Sold

Year: 2001

Year:2001 Make:Daewoo Model:Lynx 200LC Condition:Good Machine Status:Under Power Weight:8000 chuck: 8" 3 jaw spindle bore: 2.5" chip conveyor parts catcher tool setter eye no tooling

Price on request

USA

Daewoo Lynx 200LC cnc lathe Sold

Year: 2001

Maximum Cutting diameter: 280mm Spindle Speed: 45 - 4500rpm Spindle Motor Power: 11kW Swing: 460mm Bar Capacity: 65mm Control: FANUC 21-iT Turret Positions: 10 Station Maximum Cutting Length: 500mm Description: Swarf conveyor, Tool setter, Coolant, Tailstock, Interlocked guards, Low Volt Light, 3 Jaw Chuck, Magazine Barfeed, Collet Chuck, Parts Catcher, Manuals

Price on request

United Kingdom

Used Daewoo Lynx 200LC turning center Sold

Year: 1999

DATE OF MANUFACTURE/INSTALLED 12/1999 / 2000 SWING OVER BED 20.10" SWING OVER CARRIAGE 13.78" MAX. TURNING DIAMETER 11" MAX. TURNING LENGTH 20" X AXIS TRAVEL 6.3" Z AXIS TRAVEL 20.90" RAPID TRAVERSE RATE X/Z AXES 787/944 SPINDLE NOSE A2-6 SPINDLE SPEEDS 45 - 4500 RPM SPINDLE BORE 2.99" MAX. BAR STOCK DIAMETER 2.50" SPINDLE MOTOR 20/15 HP TURRET CAPACITY 10 POSITIONS TAILSTOCK TAPER MT #4 TAILSTOCK QUILL TRAVEL / DIAMETER 3.15"/2.56" MACHINE WEIGHT (APPROX) 7000 LBS Equipped With: FANUC 21iTB …

Price on request

USA

Used DAEWOO LYNX 200-LC Cnc lathe, MITSUBISHI M64L CNTRL Sold

Year: 2000

SPECIFICATIONS SWING: 20.1” SWING OVER CARRIAGE: 13.7” TURNING DIAMETER:11” TURNING LENGTH:20.0" 45- 4,500 RPM 15HP SPINDLE:A2-6 BAR CAPACITY:2.50" DRAW TUBE I.D.:2.60" SPINDLE BORE:2.99" 12-POSITION TURRET 945 IPM RAPID RATES:945 IPM 77” LONG X 63” DEEP. 205-235V/3-PHASE POWER EQUIPPED WITH MITSUBISHI M64L CONTROL BOX WAYS TOOL PRESETTER PROGRAMMABLE TAILSTOCK QUILL 3-JAW KITAGAWA MODEL BB08 HOLLOW CHUCK

Price on request

USA

Daewoo Lynx 200LC

Here is a selection of similar machines

Here is a selection of similar machines

Similar machines sold on our website

Categories

Menu

Are you looking for this machine?