Machine's specifications - Daewoo Lynx 200 Used machines

Manufacturer	Daewoo
Model	Lynx 200
Category	Lathes - cnc lathes

Daewoo LYNX 200B cnc lathe Sold

Year:

Daewoo CNC lathe model LYNX 200B, 2axis FANUC 21-T-Series control turning diameter 250mm turning length 300 10ATC tool magazine spindle speed 3000rpm chip conveyor

Price on request

Poland

Daewoo Lynx 200 cnc lathe Sold

Year:

Daewoo Lynx 200 300x460mm cnc lathe Distance between points: 300 mm Control Fanuc 21-T Flip over bench: 460 mm Flip over guide: 350 mm Spindle hole: 53mm X axis travel: 160 mm Z axis travel: 330 mm Speeds: 50-5000 rpm Spindle nose: A2-5 10 position motorized turret Tool height: 25mm CE certificate

Price on request

Spain

DAEWOO Lynx 200 Cnc lathe Sold

Year: 1998

Price on request

Poland

Used DAEWOO LYNX 200 B Cnc lathe Sold

Year: 2001

Specification Description MAX BAR DIAMETER 2.0 INCHES BORE DIAMETER 2.44" SPEEDS 5000 RPM MAIN SPINDLE MOTOR HP 12.0 HP CAPACITY/ SWING OVER BED 20.1 INCHES SWING OVER SADDLE 13.7 X-AXIS (CROSS) 6.3 (5.51-0.79) INCHES Z- AXIS (LONGITUDINAL) 13.0 INCHES MAX DIAMETER 11.0 INCHES TAILSTOCK NO TURNING LENGTH 12.0" CHUCK DIAMETER 8.25" TURRET, NUMBER 1 STATIONS/ STATIONS REAR 12 DIMENSION 64.0 X 63.0 X 61.0 Equipped With: FANUC 21 TB CNC CONTROL CHIP CONVEYOR TURBO SYSTEMS

Price on request

USA

Used DAEWOO LYNX 200 A Cnc lathe Sold

Year: 1998

Price on request

France

Used DAEWOO LYNX 200 Cnc lathe Sold

Year:

Price on request

Italy

Used DAEWOO LYNX 200-B. Cnc Lathe, w/ Fanuc 21T CNC Control Sold

Year: 1998

GENERAL SPECIFICATIONS Swing over Bed 20.1” Swing over Carriage 13.7” X-Axis Travel 6.3” Z-Axis travel 13” Max Bar Capacity 2” Spindle Motor 12HP Bar Capacity 2.05” EQUIPPED WITH Fanuc 21T CNC Control 12 Position Turret Coolant System 8” 3-Jaw Chuck SMW Spacesaver 2000 Bar Feed Turbo Chip Conveyor Electrics 220/3/60 20.45 KVA

Price on request

USA

Used Daewoo Lynx 200 A Cnc lathe Sold

Year: 2000

DATE OF MANUFACTURE 2000 MAXIMUM SWING OVER BED 20.1" SWING OVER SADDLE 13.7" MAXIMUM TURNING DIAMETER 11.0" MAXIMUM TURNING LENGTH 12.7" X AXIS TRAVEL 6.3" Z AXIS TRAVEL 13.0" RAPID TRAVERSE RATE X AXIS 790 IPM RAPID TRAVERSE RATE Z AXIS 945 IPM SPINDLE BORE 2.09" MAXIMUM BAR CAPACITY 1.77" SPINDLE SPEEDS 60 - 6,000 RPM SPINDLE MOTOR 10 HP SPINDLE NOSE A2-5 TURRET CAPACITY 12 STATIONS TAILSTOCK QUILL TAPER MT #4 TAILSTOCK QUILL DIAMETER 2.6" TAILSTOCK QUILL STROKE 3.1" …

Price on request

USA

Daewoo Lynx 200 Cnc lathe Sold

Year: 2004

2004 model box way FANUC 21 does not sound super alpha motor 8 inches. 12 Team.

Price on request

Turkey

Daewoo Lynx 200A lathe Sold

Year: 2000

DISTANCE BETWEEN POINTS mm. 300 DIAMETER MAIN HOLE mm. 165 SWING OVER BED mm. 460 SWING OVER CARRIAGE mm. 350 MAIN MOTOR POWER Kw. 5,5/7,5 YEAR 2000

Price on request

Spain

Daewoo Lynx 200 LC cnc lathe Sold

Year: 2003

Approximate Machine Age: 2003 Swing Over Bed / Cross Slide 18.11"/13.78" Maximum Turning Diameter: 11.00" Max Turning Length: 20.00" Chuck Size: 6" Spindle Speeds: 45- 4,500 RPM Spindle Motor: 15/10 HP Spindle Nose A2-6 Spindle Bore: 2.99" Max Bar Size 1.75" Turret Stations: 12 Turret Index Time 0.25 SECONDS Z- Axis 13" X- Axis 6.3" Tail Stock Quill Stroke 3.15" Tail Stock Taper MT 4 Machine Floor space 76.77" X 62.60" Machine weight 7,700 LBS Kitagawa Md. BB08 3-jaw chuck …

Price on request

USA

Daewoo Lynx 200 cnc lathe Sold

Year: 1998

Daewoo Lynx 200 model 1998

Price on request

Turkey

DAEWOO LYNX 200 LC CNC Lathe Sold

Year: 2002

DAEWOO LYNX 200 LC CNC Lathe Year of manufacture: 2002 Swing over bed: 460 mm Swing over saddle: 350 mm Max. machining diameter: 280 mm Max. work lenght: 500 mm Draw tube diameter: 66 mm Travels: X-axis: 160 (20 + 140) mm Z-axis: 530 mm Chuck diameter: 210 mm Speed range: 45 - 4,500 rpm Spindle bore diameter: 76 mm Number of tool station: 10 (Base Holder) Boring bar diameter: Ø40 (1.5") Rapid traverse: X:20.000 / Z:24.000 Cutting feed: X, …

Price on request

Netherlands

Used Daewoo Lynx 200 Cnc lathe Sold

Year: 2002

Swing Over Bed: 17.3" Max. Machining Diameter: 10.4" Max. Bar Diameter: 2" Distance Between Centers: 24" Rapid Traverse: 472/945 IPM Spindle Bore: 2.44" Spindle Speeds: 4,500 RPM Tool Capacity: 12 ATC Main Motor: 10 HP Equipped with: Fanuc 21-T CNC 6" 3 Jaw Chuck Tailstock Tool Presetter

Price on request

USA

Used Daewoo Lynx 200B Cnc lathe Sold

Year: 1998

Swing Over Bed 18.11" Distance Between Centers 11.8" Turning Dia 10.2” Bar Capacity 2.00" Spindle Bore 2.44" Spindle Speed 4,500 RPM Power 15 HP # Of Tools On Turret 10 Machine Weight 7,000 Lbs Equipped With: Mitsubishi Control Box Ways

Price on request

USA

DAEWOO LYNX 200A Cnc lathe Sold

Year: 2000

Maximum Swing 20.1" Maximum Turning Diameter 12.6" Maximum Turning Length 11.8" Spindle Speed Range 60 - 6000 RPM Spindle Bore 2.08" Bar Capacity 1.75" Spindle Nose A2-5 Spindle Motor 10 HP Number of Tool Stations in Turret 12 X-Axis Travel 6.3" Z-Axis Travel 13" Rapid Traverse Rate X / Z 790 / 945 IPM Coolant Pump Pressure 65 PSI Maximum Swing Over Saddle 13.78" Maximum Turning Diameter 11.02" Maximum Turning Length 11.81" Spindle Speed Range 50 - 5000 RPM Spindle …

Price on request

USA

DAEWOO LYNX 200 LC cnc lathe Sold

Year: 2001

Turning diameter over bed: 460 mm Max turning diameter: 280 mm Turning length: 500 mm Spindle bore: 66 mm Revolver head: 10 pcs. Spindle r.p.m. range: 45 – 4 500 r.p.m. Moc silnika głównego: 11 kW Overall power demand: 23,8 kVA Weight: 3 500 kg Control: CNC FANUC 21i-T Year of production: 2001 Made in: Korea

Price on request

Poland

DAEWOO Lynx 200 cnc lathe Sold

Year: 1998

1998 DAEWOO Lynx 200 CNC Turning Center Made in Korea 5,000 RPM Spindle 1.77" Bar Capacity 16C Collet Nose Tool Presetter Parts Catcher 18.11" Max Swing Over Bed: 11.02" Max Turning Diameter 11.81" Max Turning Length 13.78" Max Swing Over Saddle 6.3" X-Travels 13" Z-Travels 2.09" Through Hole 12 Station Turret Chip Conveyor Coolant Tank and Pump A2-5 Spindle Nose Rapid Traverse Rate (X/Z): 787 / 945 IPM Tailstock / 2.56" Tailstock Quill Diameter /3.15" Tailstock Quill Travel 10 HP …

Price on request

USA

Daewoo Lynx 200 CNC lathe Sold

Year: 2001

Maximum Cutting diameter: 280mm Swing: 460mm Maximum Turning Length: 300mm Spindle Speed: 45 - 4500rpm Spindle Motor Power: 7.5kW Bar Capacity: 52mm Turret Positions: 10 Station Control: FANUC 21T Description: Tool setter, Coolant, Low Volt Light, Barfeed, Magazine Barfeed, Collet Chuck, Parts Catcher, Manuals, Magazine Barfeed Interface.

Price on request

United Kingdom

Used Daewoo Lynx 200B Cnc lathe Sold

Year: 1999

CONTROL: FANUC MAXIMUM SWING: 18" TURN DIAMETER: 11" MACHINING LENGTH: 12" SPINDLE BORE: 2.4" BAR CAPACITY: 2" CHUCK SIZE: 8" SPINDLE SPEED: 4000 RPM MAIN MOTOR: 10 HP TURRET POSITION: 10 LIVE TOOLING/MILLING: NO EQUIPPED WITH: Fanuc 21-T 8” Chuck Tool Presetter Automatic Gantry Load/Offloader Remote Pulse Generator

Price on request

USA

DAEWOO Lynx 200B 2-axis CNC Lathe Sold

Year: 1998

Maximum Swing over Bed: 460mm Maximum Machining Diameter: 280mm Standard Machining Diameter: 200mm Maximum Machining Length: 300mm Maximum Bar Capacity: 52mm Z-axis Travel: 330mm X-axis Travel: 160mm Rapid Traverse (Z): 24 m/min Rapid Traverse (X): 20 m/min Spindle Speeds: 40 - 4000rpm Spindle Drive: 7.5 kW Tailstock Bore: MT No.4 Number of Turret Stations: 10 CNC System: Fanuc 21T Equipped with: 3-jaw Chuck, Tool Setter, Turret Tools, Tailstock

Price on request

United Kingdom

DAEWOO - LYNX 200 Sold

Year: 2001

CORSA DEL CANOTTO 80 mm DIAMETRO DEL CANOTTO 65 mm CONO DEL CANOTTO MORSE 4 EVACQUATORE TRUCIOLI SI MANUALI D' ISTRUZIONI SI

Price on request

Italy

Used DAEWOO LYNX 200A Cnc lathe Sold

Year: 1997

Price on request

Italy

Used DAEWOO LYNX 200 Cnc lathe Sold

Year:

Spindle Speed 50 – 5000 RPM Spindle Nose A2-5 Spindle Motor 10 HP Swing Over Bed 18.11” Swing Over Saddle 13.78” X Axis Travel 6.3” Z Axis Travel 13.0” Maximum Machining Diameter 11.02” Hole Thru Spindle 2.09” Bar Feed Capacity 1.3/4” Tool Stations 10 Boring Bar Diameter 1 ½” Index Time .15 SECONDS Rapid Traverse (X1Z) 787/944 IPM Weight Approximate 7000 LBS. EQUIPMENT & FEATURES: Fanuc 21L-T Control 5C Collet Chuck Tool Setter Part Catcher Manuals

Price on request

USA

DAEWOO LYNX 200B cnc lathe Sold

Year: 1998

CONTROL: FANUC 21-T SWING OVER BED: 460mm SWING OVER SADDLE: 350mm MAX. TURNING DIAMETER: 300mm MAX. TURNING LENGTH: 280mm TRAVELS: 160 x 330mm XZ TURRET: 10 STATION SPINDLE SPEED: 4000 RPM SPINDLE BORE: 62mm PLUS: KITAGAWA HYDRAULIC CHUCK, TOOLSETTING PROBE, SWARF CONVEYOR, TRANSFORMER

Price on request

United Kingdom

Used DAEWOO LYNX 200A Cnc lathe, FANUC 21ITB CNTRL Sold

Year: 1998

SPECIFICATIONS CONTROL:FANUC 21ITB SWING OVER BED:18.1” SWING OVER CARRIAGE:13.7” X AXIS TRAVEL:6.3” Z AXIS TRAVEL:13” MAX BAR CAPACITY:1.75” MAX TURN DIAMETER:11.4” SPINDLE NOSE: A2-6 SPINDLE SPEED:60-6000 RPM SPINDLE MOTOR: 10HP RAPID TRAVERSE RATES: 790X/ 945Z IPM TURRET STATIONS:120 EQUIPPED WITH -BARFEED INTERFACE -LNS HYDROBAR BARFEEDER -PARTS CATCHER -6” CHUCK

Price on request

USA

Used DAEWOO LYNX 200B Cnc lathe Sold

Year: 1998

Price on request

Italy

Used Daewoo Lynx 200 Cnc lathe Sold

Year: 1999

Price on request

Poland

DAEWOO Lynx 200B cnc lathe Sold

Year: 2000

CONTROL: FANUC 21-T SWING OVER BED: 460mm SWING OVER SADDLE: 350mm MAX. TURNING DIAMETER: 280mm MAX. TURNING LENGTH: 300mm TRAVELS: 160 x 330mm (X, Z) TURRET: 10 STATIONS SPINDLE SPEED: 4000 RPM SPINDLE BORE: 62mm PLUS: TAILSTOCK, SWARF CONVEYOR

Price on request

United Kingdom

DAEWOO Lynx 200 Sold

Year: 2001

Bar Capacity: 52mm - Swarf conveyor, Tool setter, Coolant, Low Volt Light, Collet Chuck, Parts Catcher

Price on request

United Kingdom

DAEWOO Lynx 200B 2-axis CNC Lathe Sold

Year: 1998

Maximum Swing over Bed: 460mm Maximum Machining Diameter: 280mm Standard Machining Diameter: 200mm Maximum Machining Length: 300mm Maximum Bar Capacity: 52mm Z-axis Travel: 330mm X-axis Travel: 160mm Rapid Traverse (Z): 24 m/min Rapid Traverse (X): 20 m/min Spindle Speeds: 40 - 4000rpm Spindle Nose: A2-6 Spindle Drive: 10 HP Tailstock Bore: MT No.4 Tailstock Quill Stroke: 80mm Number of Turret Stations: 10 CNC System: Fanuc 21T Equipped with: 3-jaw Chuck, Tool Presetter, Turret Tools, Tailstock.

Price on request

United Kingdom

Used DAEWOO, Model LYNX 200. CNC TURNING CENTER Sold

Year: 2000

SPECIFICATIONS: SWING OVER BED ................. 18.11" SWING OVER SADDLE .............. 13.78" MAX. MACHINING DIA. ............ 11.02" MAX. WORK LENGTH ............... 11.81" DRAW TUBE DIA. ................. 1.77" X-AXIS TRAVEL .................. 6.3" Z-AXIS TRAVEL .................. 13" SPEED RANGE .................... 50-5000 RPM NO. OF TOOL STATIONS ........... 10 OD TOOL HEIGHT ................. 1" BORING BAR DIA. ................ 1.5" INDEXING TIME .................. 0.15 SEC RAPID TRAVERSE RATE X/Z ........ 787/944 IPM MOTOR .......................... 10HP EQUIPPED WITH: - FANUC 21T CNC CONTROL - 8" 3-JAW …

Price on request

USA

Used Daewoo Lynx 200A. Cnc Chucker, w/ Fanuc 21-T CNC Control Sold

Year: 1998

Specification Maximum Swing Over Bed 18.11" Maximum Swing Over Saddle 13.78" Spindle Motor 10 HP Hole Thru Spindle 2.09" Hole Thru Draw Tube 1.77" Turret Capacity 12 Tools X-Axis Travel 6.3" Z-Axis Travel 13" Rapid Traverse Rate X / Z-Axes 787 / 945 IPM Equipped With: Fanuc 21-T CNC Control SMW Space Saver 2000 Servo Magazine Bar Loader (66" Maximum Bar Length) 12-Station Turret Parts Catcher Coolant System 6" 3-Jaw Chuck Foot Pedal Work Light

Price on request

USA

Used Daewoo Lynx 200A. Cnc Lathe, w/ Fanuc 21T Control Sold

Year: 2000

Specifications Chuck 6" Jaw Max Swing Over Bed 18.11" Max Swing Over Saddle 13.78" Hole Through Spindle 2.09" Hole Thru Draw Tube 1.77" Turret 12 Station Turret Travels (X, Z) 6.3" x 13" Rapdi Traverse Rage (X/Z) 787/945 IPM Equipped with Fanuc 21T Control Tailstock

Price on request

USA

Used Daewoo Lynx 200B. Cnc Lathe, w/ Fanuc 21TB Control Sold

Year: 1998

Specifications Chuck 8" Bar Capacity 2" Turning Diameter 11" Centers 13" Turret 12 Station Swing Over Bed 20.1" Swing Over Carriage 13.7" Motor 12 HP Equipped with Fanuc 21TB Control Coolant Tank Chip Conveyor Parts Catcher SMW Spacesaver Barfeeder

Price on request

USA

Used Daewoo Lynx 200A. Cnc Turning Center, w/ Fanuc 21T CNC Controls Sold

Year: 1998

EQUIPPED WITH: Fanuc 21T CNC Controls, 12 Station Turret, Coolant System, Parts Catcher,Tailstock, 6' LNS Bar Feed System, SPECIFICATIONS: Max Swing Over Bed 18.11" Max Swng Over Saddle 13.78" Hole Thru Spindle 2.09" Hole Thru Draw Tube 1.77" Turret Capacity 12 Stations Turret Travels (X,Z) 6.3" x 13" Rapid Traverse Rate (X/Z) 787 / 945 IPM

Price on request

USA

Used DAEWOO LYNX 200 Cnc lathe Sold

Year: 1999

Diameter Bar Capacity : 42 mm - Diameter Max Swing over bed : 460 mm - Standard Machining Diameter : 152 mm - Max Machining Length : 300 mm - Spindle Power : 7,5kW - Diameter Spindle Bore : 52 mm - Spindle Nose : A2-5 - Spindle Speed Range : 5000 rpm - 1Turret / 10 Stations - X Axis Travel : 160 mm - Z Axis Travel : 330 mm - Tailstock Taper : MT 4

Price on request

France

DAEWOO Lynx 200 Cnc lathe Sold

Year: 2000

The machine also has a "gantry"

Price on request

Italy

Used Daewoo Lynx 200 Cnc lathe Sold

Year: 1998

DATE OF MANUFACTURE 1998 MAXIMUM SWING OVER BED 20.1" SWING OVER SADDLE 13.7" MAXIMUM TURNING DIAMETER 11.0" MAXIMUM TURNING LENGTH 12.7" X AXIS TRAVEL 6.3" Z AXIS TRAVEL 13" RAPID TRAVERSE RATE X AXIS 790 IPM RAPID TRAVERSE RATE Z AXIS 945 IPM SPINDLE BORE 2.09" MAXIMUM BAR CAPACITY 1.77" SPINDLE SPEEDS 60 - 6,000 RPM SPINDLE MOTOR 10 HP SPINDLE NOSE A2-5 TURRET CAPACITY 12 STATIONS TAILSTOCK QUILL TAPER MT #4 TAILSTOCK QUILL DIAMETER 2.6" TAILSTOCK QUILL STROKE 3.1" …

Price on request

USA

Used Daewoo Lynx 200 2 Axis cnc turning center Sold

Year: 2004

Swing Over Bed: 17.3" Max. Machining Diameter: 10.4" Max. Bar Diameter: 2" Distance Between Centers: 24" Rapid Traverse: 472/945 IPM Spindle Bore: 2.44" Spindle Speeds: 4,500 RPM Tool Capacity: 12 ATC Main Motor: 10 HP Equipped with: Fanuc 21iT CNC Control 6" 3-Jaw Chuck LNS Barfeed

Price on request

USA

Used DAEWOO LYNX 200 B Cnc lathe Sold

Year: 2000

Specification Description MAX BAR DIAMETER 2.0 INCHES BORE DIAMETER 2.44" SPEEDS 5000 RPM MAIN SPINDLE MOTOR HP 12.0 HP CAPACITY/ SWING OVER BED 20.1 INCHES SWING OVER SADDLE 13.7 X-AXIS (CROSS) 6.3 (5.51-0.79) INCHES Z- AXIS (LONGITUDINAL) 13.0 INCHES MAX DIAMETER 11.0 INCHES TAILSTOCK NO TURNING LENGTH 12.0" CHUCK DIAMETER 8.25" TURRET, NUMBER 1 STATIONS/ STATIONS REAR 12 DIMENSION 64.0 X 63.0 X 61.0 Equipped With: M-50 MITSUBISHI CNC CONTROL 520 COLLET CHUCK SMW SPACE SAVER BAR FEED PARTS CATCHER …

Price on request

USA

Daewoo LYNX 200 cnc lathe Sold

Year: 2000

Daewoo CNC lathe, 2000 model LYNX 200, 2axis FANUC control

Price on request

Poland

Daewoo Lynx 200LC cnc lathe Sold

Year: 2001

Maximum Cutting diameter: 280mm Swing: 460mm Spindle Speed: 45 - 4500rpm Spindle Motor Power: 11kW Bar Capacity: 65mm Turret Positions: 10 Station Control: FANUC 21-iT Maximum Cutting Length: 500mm Description: Swarf conveyor, Tool setter, Coolant, Tailstock, Low Volt Light, Collets, Barfeed, Magazine Barfeed, Collet Chuck, Parts Catcher, Manuals

Price on request

United Kingdom

Used Daewoo LYNX 200 cnc lathe Sold

Year: 1998

cnc lathe model DAEWOO LYNX 200, bar pass 52, bidirectional turret 10 pos. tool setting, tailstock in cycle piece collecting arm, cnc Fanuc 21-T chip conveyor belt, year 9/1998 complete with manuals and documentation weight 3200 kg, CE marking

Price on request

Italy

Daewoo Lynx 200 cnc lathe Sold

Year: 2001

Swing over bed 460 mm Max. Turning diameter 280 mm Max. Turning length 300 mm Max. Turning diameter from 51 mm bar Chuck [Counter] Attack ASA 6 Rotation speed r / min 4000 Pot. AC motor (cont. / 30min.) 5.5 kW / 7.5 Torretta # tools nr. 10 Control FANUC 21I-T

Price on request

Italy

Daewoo Lynx 200

Here is a selection of similar machines

Here is a selection of similar machines

Similar machines sold on our website

Categories

Menu

Are you looking for this machine?

Turning length	300 mm
Turning Ø	280 mm
Ø above the bed	460 mm
Ø above transversing slide	350 mm
Length between centers	300 mm
Type of CNC	Fanuc 21-T
X-axis	160 mm
Z-axis	530 mm
Spindle taper	A2-5
Spindle bore	76 mm
Number of turrets	1
Number of tools on turret	10
Number of rotating tools	10
Turning speed	4500 rpm
Spindle motor power	11 kW
Tailstock	no
Bar feeder	no
-------------------
Length x width x height	1620.0 × 1590.0 × 1550.0
Weight	3170 kg