Price on request
View priceContact us to receive an offer.
| Option to cut tubes | no |
| Max thickness | 40 mm |
| CNC | yes |
| CNC type | Beckhoff |
| Travel X | 3000 mm |
| Travel Y | 1500 mm |
| ------------------- | |
| Weight | 10000 kg |
| worked hours | |
| hours under power | |
| state | like new |
| At local norms | yes |
| status | under power |
| Datasheet | Songu Mach 3015 |
| Last availability date | 04/05/2026 |
This Songu Mach 3015 fiber laser cutting machine, manufactured in 2023, features a working area of 3000 x 1500 mm and a maximum cutting thickness of 40 mm. The machine weighs approximately 10,000 kg, including the main frame and loading table. It is equipped with a 12 kW MaxPhotonix laser source, providing powerful cutting capabilities for various materials such as mild steel, stainless steel, aluminum, copper, and brass.
The machine operates on a Beckhoff PLC system running Windows 10 and utilizes Lantek CAM software with a dedicated postprocessor for efficient programming. It includes a Hoerbiger gas system with three inlets for oxygen, nitrogen, and compressed air at 16 BAR, supporting different cutting and assist gas options.
Safety features include CE marking, fully enclosed construction, door interlocks that stop the machine upon opening, and light barriers that halt the table changing process without interrupting cutting. The hydraulic table changer supports two pallets with a lifting capacity of 1410 kg each, maintaining pallet height during changes.
The laser head is a Precitec ProCutter 2.0 with available spares and consumables in the EU. The machine uses Alpha direct drive servo drivers with reducer gears for the axes and features automatic lubrication of axes and guideways. Positioning speed reaches up to 100 m/min with 2.4g acceleration, and positioning accuracy is ±0.05 mm with repositioning accuracy of ±0.03 mm.
Additional features include an automatic focus control, automatic sheet location measurement, programmable cutting parameters with options such as fly cut and nanojoints, and a graphical visualization on the cutting plan. The machine bed is protected from heat, with waste trolleys located under the cutting area and loading table.
The fume extraction system by Donaldson includes large panel filters with automatic cleaning and sectioned extraction flaps that open according to the laser head position. A high-pressure 16 BAR air compressor is included for air cutting, offering a cost-effective option for mild steel cutting.
The machine has safety sensors such as crash sensors, low-pressure sensors, and a safety light curtain sensor labeled 'LJTECH'. The electrical cabinet is mounted directly on the machine, with organized and intact wiring. The control panel features emergency stop and start buttons along with a key switch and appears well-maintained.
Visible components include the laser cutting bed with metal support slats and protective accordion-style covers on the linear rails, the laser head assembly with attached cables and hoses, pneumatic and hydraulic components with pressure gauges, and side and front access doors. The machine interior shows signs of use and some dirt accumulation but no visible damage, indicating operational condition. Overall, this fiber laser cutting machine offers a comprehensive set of features suitable for precise and efficient cutting tasks in various industrial applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Fiber laser Songu Mach 3015 Year 2023 - Put into operation 2024
Power: 12kW MaxPhotonix laser source
Size: 3x1.5m Working area
Working Hours: Total run time - 105days (2520h), Total NC run time 73days (1752h)
Operating system: Beckhoff PLC operated from Windows 10
CAM system: Lantek CAM, postprocessor for the machine. Easy to use and conventient.
Gas system: Hoerbiger with 3 gas inlets (O2, N2 and compressed air 16BAR/Or anything else)
Fully enclosed and with CE marking
Safety systems: Opening the door stops the machine and changing table light barriers stop the table changing process (does not stop the machine while working)
Table changer: Hydraulic table changer with two pallets. Pallets in the machine remain in the same height, tables are chain driven. Hydraulic liftin capacity 1410kg
Alpha direct drive servo drivers for axises with Alpha reducer gears.
Laser head: Precitec ProCutter2.0 - spares and consumables available in EU
Automatic lubrication of axises and guideways
Fume extractor: Donaldson - has big panel filters with automatic cleaning function. Starts when machine starts cutting. Laser frame has sectioned fume extraction system - flaps open up where the laser head is moving.
Positioning speed: 100m/min, acceleration 2.4g
Accuracy: Positioning +-0,05, Repositioning +-0,03
Weight: Main frame ~8800kg, loading table ~2500kg
Camera inside the working area
Side access from two doors, front access
Elecrical cabinet mounted to the machine
Cuts materials like: Mild steel, stainless, aluminium, copper, brass. Example, 20mm mild steel - cutting speed 4m/min (O2), 3mm cutting speed 28m/min (N2)
High pressure air compressor: 16Bar compressor for Air cutting, cheaper function for cutting mild steel
Uses NC code for cutting, part size is determined from NC and cutter compensation parameter that can be changed from the machine
Machine cutting parameters - Fly cut, film burn, small contour, etc. One single parameter consists of 9 different adjustable parameters. Option for nozzle cleaning while cutting and programmable nanojoints (extra small breakaway point for part removal)
Automatic focus control
Automatic sheet location measuring system
Part Stop, Contour Stop, Crash sensor, Low pressure sensors, etc
MDI mode for simple sheet trimming funcion
Machine bed protected from heat
Waste trolleys under the main cutting area and loading table
Graphical visualisation on cutting plan
Alarm log files
Under power, can be tested
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Factory – small or medium company |
| Active since | 2019 |
| Offers online | 1 |
| Last activity | April 13, 2026 |
Fiber laser Songu Mach 3015 Year 2023 - Put into operation 2024
Power: 12kW MaxPhotonix laser source
Size: 3x1.5m Working area
Working Hours: Total run time - 105days (2520h), Total NC run time 73days (1752h)
Operating system: Beckhoff PLC operated from Windows 10
CAM system: Lantek CAM, postprocessor for the machine. Easy to use and conventient.
Gas system: Hoerbiger with 3 gas inlets (O2, N2 and compressed air 16BAR/Or anything else)
Fully enclosed and with CE marking
Safety systems: Opening the door stops the machine and changing table light barriers stop the table changing process (does not stop the machine while working)
Table changer: Hydraulic table changer with two pallets. Pallets in the machine remain in the same height, tables are chain driven. Hydraulic liftin capacity 1410kg
Alpha direct drive servo drivers for axises with Alpha reducer gears.
Laser head: Precitec ProCutter2.0 - spares and consumables available in EU
Automatic lubrication of axises and guideways
Fume extractor: Donaldson - has big panel filters with automatic cleaning function. Starts when machine starts cutting. Laser frame has sectioned fume extraction system - flaps open up where the laser head is moving.
Positioning speed: 100m/min, acceleration 2.4g
Accuracy: Positioning +-0,05, Repositioning +-0,03
Weight: Main frame ~8800kg, loading table ~2500kg
Camera inside the working area
Side access from two doors, front access
Elecrical cabinet mounted to the machine
Cuts materials like: Mild steel, stainless, aluminium, copper, brass. Example, 20mm mild steel - cutting speed 4m/min (O2), 3mm cutting speed 28m/min (N2)
High pressure air compressor: 16Bar compressor for Air cutting, cheaper function for cutting mild steel
Uses NC code for cutting, part size is determined from NC and cutter compensation parameter that can be changed from the machine
Machine cutting parameters - Fly cut, film burn, small contour, etc. One single parameter consists of 9 different adjustable parameters. Option for nozzle cleaning while cutting and programmable nanojoints (extra small breakaway point for part removal)
Automatic focus control
Automatic sheet location measuring system
Part Stop, Contour Stop, Crash sensor, Low pressure sensors, etc
MDI mode for simple sheet trimming funcion
Machine bed protected from heat
Waste trolleys under the main cutting area and loading table
Graphical visualisation on cutting plan
Alarm log files
Under power, can be tested
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Option to cut tubes | no |
| Max thickness | 40 mm |
| CNC | yes |
| CNC type | Beckhoff |
| Travel X | 3000 mm |
| Travel Y | 1500 mm |
| ------------------- | |
| Weight | 10000 kg |
| worked hours | |
| hours under power | |
| state | like new |
| At local norms | yes |
| status | under power |
| Datasheet | Songu Mach 3015 |
| Last availability date | 04/05/2026 |
This Songu Mach 3015 fiber laser cutting machine, manufactured in 2023, features a working area of 3000 x 1500 mm and a maximum cutting thickness of 40 mm. The machine weighs approximately 10,000 kg, including the main frame and loading table. It is equipped with a 12 kW MaxPhotonix laser source, providing powerful cutting capabilities for various materials such as mild steel, stainless steel, aluminum, copper, and brass.
The machine operates on a Beckhoff PLC system running Windows 10 and utilizes Lantek CAM software with a dedicated postprocessor for efficient programming. It includes a Hoerbiger gas system with three inlets for oxygen, nitrogen, and compressed air at 16 BAR, supporting different cutting and assist gas options.
Safety features include CE marking, fully enclosed construction, door interlocks that stop the machine upon opening, and light barriers that halt the table changing process without interrupting cutting. The hydraulic table changer supports two pallets with a lifting capacity of 1410 kg each, maintaining pallet height during changes.
The laser head is a Precitec ProCutter 2.0 with available spares and consumables in the EU. The machine uses Alpha direct drive servo drivers with reducer gears for the axes and features automatic lubrication of axes and guideways. Positioning speed reaches up to 100 m/min with 2.4g acceleration, and positioning accuracy is ±0.05 mm with repositioning accuracy of ±0.03 mm.
Additional features include an automatic focus control, automatic sheet location measurement, programmable cutting parameters with options such as fly cut and nanojoints, and a graphical visualization on the cutting plan. The machine bed is protected from heat, with waste trolleys located under the cutting area and loading table.
The fume extraction system by Donaldson includes large panel filters with automatic cleaning and sectioned extraction flaps that open according to the laser head position. A high-pressure 16 BAR air compressor is included for air cutting, offering a cost-effective option for mild steel cutting.
The machine has safety sensors such as crash sensors, low-pressure sensors, and a safety light curtain sensor labeled 'LJTECH'. The electrical cabinet is mounted directly on the machine, with organized and intact wiring. The control panel features emergency stop and start buttons along with a key switch and appears well-maintained.
Visible components include the laser cutting bed with metal support slats and protective accordion-style covers on the linear rails, the laser head assembly with attached cables and hoses, pneumatic and hydraulic components with pressure gauges, and side and front access doors. The machine interior shows signs of use and some dirt accumulation but no visible damage, indicating operational condition. Overall, this fiber laser cutting machine offers a comprehensive set of features suitable for precise and efficient cutting tasks in various industrial applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2019 |
| Offers online | 1 |
| Last activity | April 13, 2026 |
Машина за лазерно рязане Songu Mach 3015
Laserový řezací stroj Songu Mach 3015
Songu Mach 3015 Laserskæremaskine
Songu Mach 3015 Laserschneidmaschine
Μηχανή κοπής λέιζερ Songu Mach 3015
Songu Mach 3015 Laser cutting machine
Máquina de corte láser Songu Mach 3015
Machine de découpe laser Songu Mach 3015
Stroj za lasersko rezanje Songu Mach 3015
Songu Mach 3015 Lézervágó gép
Macchina taglio laser Songu Mach 3015
Songu Mach 3015 Lazerinio pjovimo staklės
Songu Mach 3015 Lasersnijmachine
Maszyna do cięcia laserowego Songu Mach 3015
Máquina de corte a laser Songu Mach 3015
Mașină de tăiere cu laser Songu Mach 3015
Songu Mach 3015 Станок лазерной резки
Mašina za lasersko rezanje Songu Mach 3015
Songu Mach 3015 Laserskärmaskin
Lazer kesim makinesi Songu Mach 3015
EN
- Languages
English (GB)