SOLNA D 300 Web continuous printing press Verified seller

Price on request

Manufacturer SOLNA
Model D 300
Year 2001
Location Slovenia SI
Category Web continuous printing presses
Product id P211003003
SOLNA ROTARY FEATURES


Solna D 300 rotary press - November 2001 - cut off 56 with relative equipment capable of developing a maximum speed of 40,000 cylinder revolutions per hour and with a maximum production of 35,000 copies and 30,000 copies in third fold.

PRINT UNIT

5 printing units with 1 + 1 sections


INCLUDING:

Closing device for inserting the full sheet or two halves.
Lateral and circumferential plate registers, adjustable with the machine in motion from the console.
Pressure adjustment while the machine is running.
Tilting ink inkwells operating by means of special levers.
Motorized inkwell roller.
Inking and wetting rollers operating separately and pneumatically.
Carter internally insulated to allow noise containment.
Safety devices on the rollers.
Automatic washing device for each inking.
Complete set of rubber wetting and inking rollers.
Electronic system pre-wired and ready for operation.
Machine lighting system.
Band breaking photocell.
4 2 + 1 printing units equipped as 1 + 1 but with:
1 register remote control,
1 remote ink control.
7 AMAL SR 25 automatic integrated
1 F 302 FOLDER with third fold including the following equipment:
Jaw mechanism.
Motorized compensating rollers controlled by RTF console
Longitudinal perforation of cross-folded products.
Forming cone with air both in the tips and in the bars.
Drive wheels with pneumatic control.
Output table.
Security shelters.
Cross fold.
Platform with ladder around the bender.
Motorized register and guide rollers for three rollers.
Band repair set.
1 motorized register
1 cross fold with longitudinal perforation
1 exit carpet

DRIVE AND CONTROL EQUIPMENT
1 motor and size 1 cabin.
1 motor and size 3 cab.
DPC auxiliary console.
Series of pre - wired cables between cab, engine, console and machine.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Nbr print units 5
Speed 35000 u/h
Dampening
-------------------
Worked hours
Hours under power
State excellent
At local norms ---------
Status in production
Client type Consultant
Active since 2018
Offers online 26
Last activity Sept. 19, 2022

Description

SOLNA ROTARY FEATURES


Solna D 300 rotary press - November 2001 - cut off 56 with relative equipment capable of developing a maximum speed of 40,000 cylinder revolutions per hour and with a maximum production of 35,000 copies and 30,000 copies in third fold.

PRINT UNIT

5 printing units with 1 + 1 sections


INCLUDING:

Closing device for inserting the full sheet or two halves.
Lateral and circumferential plate registers, adjustable with the machine in motion from the console.
Pressure adjustment while the machine is running.
Tilting ink inkwells operating by means of special levers.
Motorized inkwell roller.
Inking and wetting rollers operating separately and pneumatically.
Carter internally insulated to allow noise containment.
Safety devices on the rollers.
Automatic washing device for each inking.
Complete set of rubber wetting and inking rollers.
Electronic system pre-wired and ready for operation.
Machine lighting system.
Band breaking photocell.
4 2 + 1 printing units equipped as 1 + 1 but with:
1 register remote control,
1 remote ink control.
7 AMAL SR 25 automatic integrated
1 F 302 FOLDER with third fold including the following equipment:
Jaw mechanism.
Motorized compensating rollers controlled by RTF console
Longitudinal perforation of cross-folded products.
Forming cone with air both in the tips and in the bars.
Drive wheels with pneumatic control.
Output table.
Security shelters.
Cross fold.
Platform with ladder around the bender.
Motorized register and guide rollers for three rollers.
Band repair set.
1 motorized register
1 cross fold with longitudinal perforation
1 exit carpet

DRIVE AND CONTROL EQUIPMENT
1 motor and size 1 cabin.
1 motor and size 3 cab.
DPC auxiliary console.
Series of pre - wired cables between cab, engine, console and machine.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Nbr print units 5
Speed 35000 u/h
Dampening
-------------------
Worked hours
Hours under power
State excellent
At local norms ---------
Status in production

About this seller

Client type Consultant
Active since 2018
Offers online 26
Last activity Sept. 19, 2022

Here is a selection of similar machines