SOGI M4-910 is a professional parallel precision lathe, it works on all types of ferrous metal materials: cylindrical turning, conical turning, facing, profiling, drilling, boring, thread cutting and parting.
The lathe has an oil bath spindle shaft mounted on adjustable tapered roller bearings. The spindle gears are hardened and ground. The centralized pallet guide lubrication system activated by a manual system on the wagon.
The prismatic gray cast iron bench with precision hardened and ground reinforcement ribs guarantee real lasting precision. With removable guide dowel for the most demanding turnings. The base is equipped with a removable chip tray for easy cleaning.
The quick change tool holder turret reduces tool change times when machining the workpiece. On the carriage there is a lubricating-cooling system with adjustable lighting, a protective shield from shavings. Precise advances through repositionable (noni adjustable) graduated rings on all handwheels. The thread comparator is also present.
The rotation of the spindle clockwise and anticlockwise by means of a manual lever control on the carriage. The lathe nut is protected by an extendable anti-chip cover both for safety and for a long-lasting cleaning of the machine.
CE certification and use and maintenance manual were delivered with the machine.
Technical characteristics of the SOGI M4-910 lathe
Center height: 150 mm
Maximum workable diameter on the guides: 300 mm
Maximum workable diameter on the wagon: 180 mm
Maximum workable diameter without plug: 450 mm
Distance between centers: 910 mm
Spindle speed: 75 - 1'400 rpm
Speed number: 9
Spindle taper: CM5
Bar passage: 38 mm
Spindle connection: Camlock ASA D 1 - 4 "
Upper slide stroke: 85 mm
Cross slide stroke: 160 mm
Tailstock cone: CM3
Stroke tailstock stroke: 100 mm
Longitudinal feed: 0.079 - 1.291 mm / rev
Transverse feed: 0.017 - 0.276 mm / rev
Metric pitch thread: 0.4 - 7 mm / rev
Inch thread: 4 - 60 TPI
Motor power: 230V-50 Hz-1,5 KW
Machine dimensions: 1560 x 590 x 1290 h mm
Packaging dimensions: 1700 x 800 x 1600 h mm
Net weight: 480 Kg
Gross weight: 590 Kg
Self-centering 3-jaw chuck diameter 160 mm
Spindle with 4 independent jaws, diameter 200 mm
Flange diameter 250 mm
Reduction sleeve CM5 CM3
Fixed tailstock CM3
Fixed tailstock CM5
Rotating tailstock CM3
Chip protection on the upper slide
Mechanical spindle brake
Splash guard wall mounted
Tool turret fixed in height
Lubro - refrigeration system
Use and maintenance manual and CE certification
Please note that this description may have been translated automatically. Contact us for further information.