You have the same machine to sell?

Add it to our catalogue for FREE

Start selling

About this seller

Client type Reseller
Active since 2009
Offers online 8
Last activity Feb. 3, 2021

Specifications

Table width 1000 mm
Type Hydraulic
Ram stroke 1000 mm
Nbr of strokes/min 3
-------------------
Worked hours
Hours under power
State good
At local norms yes
Status

Description

SMS HPM 250 hydraulic forming press
Year of construction 2011
bargain
3 strokes / min
Hydraulic forming press SMS
The hydraulic press, type HPM250 is a four-column press. The lower press table and the upper crosshead (cylinder crosshead) are braced with the columns to form a stable press body. The press has high rigidity and the mounting frame is easily accessible from all sides. The press is suitable for installation on the corridor level.
The upper piston is guided precisely in the crosshead (cylinder crossbeam) and is secured against rotation and forms a unit with the upper table. The upper table is provided with T-slots running from left to right. The table size inside the columns is 1000mm x 1000mm.
An additional hydraulic piston is integrated in the upper table or upper piston as an ejector. It has a press force of 500 kN and a stroke of 100 mm. The controls for the hydraulic pistons in the press and for 11 pistons of an external movement device are attached to the press. The hydraulic unit with tank and pumps is arranged behind the press via pipes. The electrical control of the press is housed in an electrical control cabinet, which is located above the enclosed hydraulic unit.
A control desk with monitor is mounted on the front right of the press, pivoted. The press has a vertically adjustable safety door in the press area and two entrance /
Escape doors equipped for entering the field.
General dimensions and weights
Hydraulically controlled piston at the top (OK)
Force (ram), programmable (approx. 10-100%) 2500 kN
Stroke 1000 mm
Installation height max. 1400 mm
min. 100 mm
Closing speed »rapid traverse-down« (free fall, for 600 mm stroke) 400 mm / s
Pressing speed 50 mm / s
Return stroke speed 300 mm / s
Ram area, usable (W x D) min. 1000 x 1000 mm
Table surface, usable (W x D) min. 1000 x 1000 mm
Column passage from the front, min. 1050 mm
Column passage on the side, min. 1050 mm
T-groove according to DIN 650 in the ram and table 12 H8
1. Groove from the center 100 mm
Groove distance 200 mm
Hydraulically controlled piston below (UK)
Force (table top) 2500 kN
Stroke 300 mm
Closing speed »Open« (at 2500 kN) 50 mm / s
Return stroke speed 300 mm / s
Hydraulically controlled ejector below (HK3)
A hydraulically controlled ejector in the middle, mounted below the table top.
Ejector force, continuously programmable (approx. 10-100%) 500 kN
Ejector stroke (path / force controlled) 100 mm
Speed / extension 50 mm / s
Ejector adapter diameter (tool part) 15 mm

Technical data work areas
Hydraulically controlled top ejector (HK1)
A hydraulically controlled ejector, mounted in the center of the press ram.
Ejector force, continuously programmable (approx. 10-100%) 500 kN
Ejector stroke (path / force controlled) 100 mm
Working speed 50 mm / s
Ejector adapter diameter (tool part) 15 mm
1 stroke max. every 60 s
min. 40 s
Waiting time after 4-24 s stroke for filling the memory

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

How does Exapro work?

Using Exapro is super easy, here is how it works

Here is a selection of similar machines

Contact the seller