Price on request
Make an offer| Power in tons | 250 T |
| Table length | 900 mm |
| Table width | 860 mm |
| Ram stroke | 600 mm |
| Distance between columns | 930 mm |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | SMG DS 250 |
| Last availability date | 08/04/2026 |
This listing is for a SMG hydraulic press, model DS 250, manufactured in 1977. The press offers a substantial pressing force of 250 tons, suitable for heavy-duty industrial applications. It features a robust table surface measuring 900 mm in length and 860 mm in width, providing ample workspace for various pressing tasks. The ram stroke extends up to 600 mm, allowing for significant material deformation or forming capabilities.
The distance between the columns is 930 mm, which accommodates a variety of die sizes and configurations. The press includes a die cushion integrated into the table, delivering a pressing force of 100 tons with a stroke of 50 mm and a surface area of 350 x 400 mm, enhancing its versatility for specialized operations.
The daylight from the table to the ram when the stroke is fully up is 600 mm, and the table height above the floor is 950 mm, facilitating ergonomic operation and material handling.
From the images, the machine is painted green with a prominent SMG logo on the front. It is equipped with a yellow protective mesh guard covering the pressing area to enhance operator safety. On the right side, there is a control panel featuring gauges, buttons, and switches for machine operation, while the left side houses a large circular dial and an emergency stop button, providing essential control and safety functions.
The hydraulic power unit, including a motor and reservoir tank, is attached to the side of the press, connected by electrical wiring and hoses. A safety railing is installed in front of the machine. The electrical control cabinet contains organized wiring and multiple relays, circuit breakers, and timers mounted on DIN rails, with wiring appearing intact and well-maintained.
Visible signs of wear and rust are present on the lower pressing surface as well as on the back and side panels of the machine, which should be considered when evaluating this unit. The press is offered as-is, where-is, without additional guarantees regarding its operational condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Manufacturer: SMG
Model: DS 250
Year of Manufacture: 1977
Technical Condition: As-is, where-is
Press Force: 250 t
Stroke: 200 mm
Distance Between Columns: 930 mm
Side Window: 380 x 380 mm
Daylight Table - Ram (Stroke Up): 600 mm
Surface of Table: 900 x 860 mm
Press Force of Die Cushion in Table: 100 t
Stroke of Die Cushion in Table: 50 mm
Surface of Die Cushion in Table: 350 x 400 mm
Table Height Above Floor: 950 mm
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 49 |
| Last activity | April 14, 2026 |
Manufacturer: SMG
Model: DS 250
Year of Manufacture: 1977
Technical Condition: As-is, where-is
Press Force: 250 t
Stroke: 200 mm
Distance Between Columns: 930 mm
Side Window: 380 x 380 mm
Daylight Table - Ram (Stroke Up): 600 mm
Surface of Table: 900 x 860 mm
Press Force of Die Cushion in Table: 100 t
Stroke of Die Cushion in Table: 50 mm
Surface of Die Cushion in Table: 350 x 400 mm
Table Height Above Floor: 950 mm
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Power in tons | 250 T |
| Table length | 900 mm |
| Table width | 860 mm |
| Ram stroke | 600 mm |
| Distance between columns | 930 mm |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | SMG DS 250 |
| Last availability date | 08/04/2026 |
This listing is for a SMG hydraulic press, model DS 250, manufactured in 1977. The press offers a substantial pressing force of 250 tons, suitable for heavy-duty industrial applications. It features a robust table surface measuring 900 mm in length and 860 mm in width, providing ample workspace for various pressing tasks. The ram stroke extends up to 600 mm, allowing for significant material deformation or forming capabilities.
The distance between the columns is 930 mm, which accommodates a variety of die sizes and configurations. The press includes a die cushion integrated into the table, delivering a pressing force of 100 tons with a stroke of 50 mm and a surface area of 350 x 400 mm, enhancing its versatility for specialized operations.
The daylight from the table to the ram when the stroke is fully up is 600 mm, and the table height above the floor is 950 mm, facilitating ergonomic operation and material handling.
From the images, the machine is painted green with a prominent SMG logo on the front. It is equipped with a yellow protective mesh guard covering the pressing area to enhance operator safety. On the right side, there is a control panel featuring gauges, buttons, and switches for machine operation, while the left side houses a large circular dial and an emergency stop button, providing essential control and safety functions.
The hydraulic power unit, including a motor and reservoir tank, is attached to the side of the press, connected by electrical wiring and hoses. A safety railing is installed in front of the machine. The electrical control cabinet contains organized wiring and multiple relays, circuit breakers, and timers mounted on DIN rails, with wiring appearing intact and well-maintained.
Visible signs of wear and rust are present on the lower pressing surface as well as on the back and side panels of the machine, which should be considered when evaluating this unit. The press is offered as-is, where-is, without additional guarantees regarding its operational condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 49 |
| Last activity | April 14, 2026 |
Хидравлична преса SMG DS 250
Hydraulický lis SMG DS 250
SMG DS 250 Hydraulisk presse
SMG DS 250 Hydraulikpresse
Υδραυλική πίεση SMG DS 250
SMG DS 250 Hydraulic press
Prensa hidráulica SMG DS 250
Presse hydraulique SMG DS 250
Hidraulična preša SMG DS 250
SMG DS 250 Hidraulikus nyomás
Pressa idraulica SMG DS 250
Hidraulinis presas SMG DS 250
SMG DS 250 Hydraulische pers
Prasa hydrauliczna SMG DS 250
Pressão hidráulica SMG DS 250
Presa hidraulica SMG DS 250
SMG DS 250 Гидравлический пресс
Hidraulična presa SMG DS 250
SMG DS 250 Hydraulisk press
Hidrolik Pres SMG DS 250
EN
- Languages
English (GB)