Price on request
Make an offer| Power in tons | 500 T |
| Table length | 1220 mm |
| Table width | 1100 mm |
| Ram stroke | 270 mm |
| Distance between columns | 1150 mm |
| Engine Power | 30 kW |
| ------------------- | |
| Length x width x height | 3100.0 × 2200.0 × 5320.0 |
| Weight | 28500 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Smeral LLO500S |
| Last availability date | 02/04/2026 |
This listing features a Smeral LLO500S forging press with a pressing capacity of 500 tons. The machine is designed for heavy industrial forging applications, equipped with a ram stroke of 270 mm. It has a passage width below the guide of 1320 mm and a distance between the guides of 1150 mm, allowing for substantial workpiece accommodation. The maximum distance between the table and ram is 870 mm, with a ram adjustment capability of 140 mm to suit various forging requirements.
The working table measures 1220 mm in length and 1100 mm in width, featuring a central hole sized 500 x 500 mm. The ram surface area is 1120 x 710 mm, and the plunger has a hole diameter of 65 mm. The machine's robust dimensions are 3100 mm in length, 2200 mm in width, and 5320 mm in height.
Constructed with a heavy-duty frame, the press includes large mounting holes and slots at its base for secure installation. The machine is equipped with dual large vertical cylinders connected to a central rotating shaft mechanism, which are integral to its forging operation. Protective covers are attached to the sides and back of the machine, enhancing safety during use.
The press shows signs of wear, rust, and dirt accumulation consistent with extensive industrial use and age, which is typical for equipment of this nature. Hydraulic or pneumatic piping is visible on the upper rear section, indicating its operational setup. Access panels and doors are present on the frame, allowing maintenance access.
Overall, this Smeral LLO500S forging press is a substantial piece of industrial equipment suitable for heavy forging tasks, with detailed specifications and visible structural components supporting its functionality.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Item Title: Smeral LLO500S Trimming Press
Manufacturer: Smeral
Model: LLO500S
Capacity: 500 tons
Ram Stroke: 270 mm
Passage Width Below the Guide: 1320 mm
Distance Between the Guides: 1150 mm
Maximum Distance Table-Ram: 870 mm
Ram Adjustment: 140 mm
Table Size: 1220 x 1100 mm
Hole in Table: 500 x 500 mm
Ram Surface: 1120 x 710 mm
Hole in Plunger: 65 mm
Electric Motor: 30 kW
Dimensions:
- Length: 3100 mm
- Width: 2200 mm
- Height: 5320 mm
Weight: 28.5 tons
Item Condition: Good condition
Technical Condition: As-is, where-is
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 14, 2026 |
Item Title: Smeral LLO500S Trimming Press
Manufacturer: Smeral
Model: LLO500S
Capacity: 500 tons
Ram Stroke: 270 mm
Passage Width Below the Guide: 1320 mm
Distance Between the Guides: 1150 mm
Maximum Distance Table-Ram: 870 mm
Ram Adjustment: 140 mm
Table Size: 1220 x 1100 mm
Hole in Table: 500 x 500 mm
Ram Surface: 1120 x 710 mm
Hole in Plunger: 65 mm
Electric Motor: 30 kW
Dimensions:
- Length: 3100 mm
- Width: 2200 mm
- Height: 5320 mm
Weight: 28.5 tons
Item Condition: Good condition
Technical Condition: As-is, where-is
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Power in tons | 500 T |
| Table length | 1220 mm |
| Table width | 1100 mm |
| Ram stroke | 270 mm |
| Distance between columns | 1150 mm |
| Engine Power | 30 kW |
| ------------------- | |
| Length x width x height | 3100.0 × 2200.0 × 5320.0 |
| Weight | 28500 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Smeral LLO500S |
| Last availability date | 02/04/2026 |
This listing features a Smeral LLO500S forging press with a pressing capacity of 500 tons. The machine is designed for heavy industrial forging applications, equipped with a ram stroke of 270 mm. It has a passage width below the guide of 1320 mm and a distance between the guides of 1150 mm, allowing for substantial workpiece accommodation. The maximum distance between the table and ram is 870 mm, with a ram adjustment capability of 140 mm to suit various forging requirements.
The working table measures 1220 mm in length and 1100 mm in width, featuring a central hole sized 500 x 500 mm. The ram surface area is 1120 x 710 mm, and the plunger has a hole diameter of 65 mm. The machine's robust dimensions are 3100 mm in length, 2200 mm in width, and 5320 mm in height.
Constructed with a heavy-duty frame, the press includes large mounting holes and slots at its base for secure installation. The machine is equipped with dual large vertical cylinders connected to a central rotating shaft mechanism, which are integral to its forging operation. Protective covers are attached to the sides and back of the machine, enhancing safety during use.
The press shows signs of wear, rust, and dirt accumulation consistent with extensive industrial use and age, which is typical for equipment of this nature. Hydraulic or pneumatic piping is visible on the upper rear section, indicating its operational setup. Access panels and doors are present on the frame, allowing maintenance access.
Overall, this Smeral LLO500S forging press is a substantial piece of industrial equipment suitable for heavy forging tasks, with detailed specifications and visible structural components supporting its functionality.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 14, 2026 |
Преса за отрязване на облоя Smeral LLO500S
Ořezávací lis Smeral LLO500S
Smeral LLO500S Afgratningspresse
Smeral LLO500S Entgratpresse
Πρέσα απογρέζωσης Smeral LLO500S
Smeral LLO500S Trimming press
Prensa de desbarbado Smeral LLO500S
Presse d’ébavurage Smeral LLO500S
Preša za uklanjanje srha Smeral LLO500S
Smeral LLO500S Sorjázó prés
Pressa di sbavatura Smeral LLO500S
Smeral LLO500S Šerpetų šalinimo presas
Smeral LLO500S Ontbraampers
Prasa do gratowania Smeral LLO500S
Prensa de rebarbação Smeral LLO500S
Presă de debavurare Smeral LLO500S
Smeral LLO500S Обрезной пресс для удаления облоя
Presa za uklanjanje srha Smeral LLO500S
Smeral LLO500S Avgradningspress
Çapak alma presi Smeral LLO500S
EN
- Languages
English (GB)