Price on request
Make an offer| Type | |
| Power in tons | 2000 T |
| Table length | 1300 mm |
| Table width | 1300 mm |
| Ram stroke | 200 mm |
| Nbr of strokes/min | |
| Distance between columns | 1040 mm |
| Engine Power | kW |
| ------------------- | |
| Length x width x height | - × - × - |
| Weight | kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Smeral LL2000 |
| Last availability date | 02/04/2026 |
This listing features a Smeral LL2000 knuckle-joint forging press with a capacity of 2000 tons. The machine is designed for heavy forging operations and includes a ram stroke of 200 mm, allowing for substantial material deformation. The press table measures 1300 x 1300 mm, providing a large working surface area suitable for various forging tasks. The distance between columns is 1040 mm, accommodating sizable workpieces.
The press is equipped with a ram surface area of 860 x 1000 mm and a hole in the table with a diameter of 130 mm, which may be useful for specific tooling or material handling needs. The shut height is 830 mm, and the bottom dead center can be adjusted between 15 to 45 mm, offering flexibility in operation. The main drive motor has a power rating of 55 kW, complemented by a 4.5 kW adjustment motor.
The machine dates from 1985 and weighs approximately 110 tons. Technical manuals are available for reference. A control panel with operational buttons is mounted on the right side of the press frame for ease of use.
The press structure is painted green but shows visible signs of wear, including chipped paint, rust patches, dirt, and grime accumulation, indicative of extensive use and age. Two large flywheels are mounted on either side of the frame, with one visible alongside a ladder providing access to the upper parts of the machine. The flywheels and internal gear mechanisms exhibit a thick layer of grease and grime, with some wear and corrosion noted on gear housing edges.
Additional visible components include vertical guide rods on the press bed, a central pressing area, and various hydraulic or lubrication lines attached to the gear housing. The area around the base contains tools, buckets, a broom, a pallet jack, and other accessories, suggesting an active workshop environment. Hanging gloves are also observed on the left side of the press.
Overall, the press appears structurally complete but shows signs of heavy use and requires attention to cosmetic and potentially maintenance aspects. No specific information on operational testing or warranty is provided.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Forging Equipment
Capacity : 2000 tons,
Ram Stroke : 200 mm,
Adjustment : 15 mm,
No. of ram strokes/min : 19,
Shut Height : 830 mm,
Distance between columns : 1040 mm,
Table surface area : 1300 x 1300 mm,
Ram surface : 860 x 1000 mm,
Hole in the table dia. : 130 mm,
Main drive motor : 55 kW,
Adjustment motor : 4.5 kW,
Bottom Dead Centre : 15 to 45 mm
Weight of the press : 110 tons approx.
Technical manuals available
Item Condition: Good working condition
Capacity Tons: 2000
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 14, 2026 |
Forging Equipment
Capacity : 2000 tons,
Ram Stroke : 200 mm,
Adjustment : 15 mm,
No. of ram strokes/min : 19,
Shut Height : 830 mm,
Distance between columns : 1040 mm,
Table surface area : 1300 x 1300 mm,
Ram surface : 860 x 1000 mm,
Hole in the table dia. : 130 mm,
Main drive motor : 55 kW,
Adjustment motor : 4.5 kW,
Bottom Dead Centre : 15 to 45 mm
Weight of the press : 110 tons approx.
Technical manuals available
Item Condition: Good working condition
Capacity Tons: 2000
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Type | |
| Power in tons | 2000 T |
| Table length | 1300 mm |
| Table width | 1300 mm |
| Ram stroke | 200 mm |
| Nbr of strokes/min | |
| Distance between columns | 1040 mm |
| Engine Power | kW |
| ------------------- | |
| Length x width x height | - × - × - |
| Weight | kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Smeral LL2000 |
| Last availability date | 02/04/2026 |
This listing features a Smeral LL2000 knuckle-joint forging press with a capacity of 2000 tons. The machine is designed for heavy forging operations and includes a ram stroke of 200 mm, allowing for substantial material deformation. The press table measures 1300 x 1300 mm, providing a large working surface area suitable for various forging tasks. The distance between columns is 1040 mm, accommodating sizable workpieces.
The press is equipped with a ram surface area of 860 x 1000 mm and a hole in the table with a diameter of 130 mm, which may be useful for specific tooling or material handling needs. The shut height is 830 mm, and the bottom dead center can be adjusted between 15 to 45 mm, offering flexibility in operation. The main drive motor has a power rating of 55 kW, complemented by a 4.5 kW adjustment motor.
The machine dates from 1985 and weighs approximately 110 tons. Technical manuals are available for reference. A control panel with operational buttons is mounted on the right side of the press frame for ease of use.
The press structure is painted green but shows visible signs of wear, including chipped paint, rust patches, dirt, and grime accumulation, indicative of extensive use and age. Two large flywheels are mounted on either side of the frame, with one visible alongside a ladder providing access to the upper parts of the machine. The flywheels and internal gear mechanisms exhibit a thick layer of grease and grime, with some wear and corrosion noted on gear housing edges.
Additional visible components include vertical guide rods on the press bed, a central pressing area, and various hydraulic or lubrication lines attached to the gear housing. The area around the base contains tools, buckets, a broom, a pallet jack, and other accessories, suggesting an active workshop environment. Hanging gloves are also observed on the left side of the press.
Overall, the press appears structurally complete but shows signs of heavy use and requires attention to cosmetic and potentially maintenance aspects. No specific information on operational testing or warranty is provided.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 14, 2026 |
Коляно-лостова преса Smeral LL2000
Kloubový lis Smeral LL2000
Smeral LL2000 Knieledpresse
Smeral LL2000 Kniehebelpresse
Πρέσα γονάτου Smeral LL2000
Smeral LL2000 Knuckle-joint press
Prensa de rodillera Smeral LL2000
Presse à genouillère Smeral LL2000
Koljenasta preša Smeral LL2000
Smeral LL2000 Térdkaros prés
Pressa a ginocchiera Smeral LL2000
Smeral LL2000 Svirtinis presas
Smeral LL2000 Kniehef-pers
Prasa kolanowa Smeral LL2000
Prensa de joelho Smeral LL2000
Presă cu articulație genunchi Smeral LL2000
Smeral LL2000 Коленно-рычажный пресс
Koleno-poluga presa Smeral LL2000
Smeral LL2000 Knäledspress
Mafsallı pres Smeral LL2000
EN
- Languages
English (GB)