DESCRIPTION:
Packaging machine for the final packing in boxes before shipment that guarantees reliability, versatility, high production characteristics even with non-top quality materials. In particular, the SM80 machine has the function of stacking products parallelepiped shape and insert the bundles obtained from a previously carton's shipping that were already formed and introduced into hoppers.

SECTORS OF USE:
Pharmaceutical, chemical, cosmetics, food, dietary, medical devices, manufacturing.

MAIN FEATURES:
Semi-automatic machine able to perform automatically and in a continuous cycle combined with all the packaging lines the grouping of products in boxes, their introduction into cartons previously taken from stock, formats and positioned at the entrance opened in such a way that enable the mobile hopper and the pusher to carry out the filling, which completed the two groups of transport side, which serve to maintain the correct squaring, convey the same to the exit. The machine stacks products of parallelepiped shape and insert the bundles thus obtained into shipping cartons previously formed. Built with modular structure, the case packer has an alternating operation. This system allows the machine to minimize the drawbacks and waste. The machine consists of three main parts:
- Automatic stacking module that groups the products according to the established arrangement. The stacking section is composed of a base, a product feeding belt and a forming group.
- Case shaping module that provides for the opening of the case to allow its subsequent insertion in the bundle. This section consists of a base, the storage and the control panel.
- Case closing module, which closes the lower and upper flaps with tape. The case closing module consists of the base, the transport belts and taping groups.

TECHNICAL DATA
Speed cases/min 16
Frequency Hz 50
Voltage Volt 380
Gross weight Kg 1730

PRODUCTION CHARACTERISTICS
Min dim product (LxWxH) 50 x 20 x 15 mm
Max dim product (LxWxH) 340 x 555 x 120 mm
Min dim bundle (LxWxH) 90 x 180 x 110 mm
Max dim bundle (LxWxH) 340 x 555 x 390 mm

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Output 16 /min
Length max of the case 340 mm
Length min of the case 50 mm
Width max of the case 555 mm
Width min of the case 20 mm
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2009
Offers online 1036
Last activity March 29, 2024

Description

DESCRIPTION:
Packaging machine for the final packing in boxes before shipment that guarantees reliability, versatility, high production characteristics even with non-top quality materials. In particular, the SM80 machine has the function of stacking products parallelepiped shape and insert the bundles obtained from a previously carton's shipping that were already formed and introduced into hoppers.

SECTORS OF USE:
Pharmaceutical, chemical, cosmetics, food, dietary, medical devices, manufacturing.

MAIN FEATURES:
Semi-automatic machine able to perform automatically and in a continuous cycle combined with all the packaging lines the grouping of products in boxes, their introduction into cartons previously taken from stock, formats and positioned at the entrance opened in such a way that enable the mobile hopper and the pusher to carry out the filling, which completed the two groups of transport side, which serve to maintain the correct squaring, convey the same to the exit. The machine stacks products of parallelepiped shape and insert the bundles thus obtained into shipping cartons previously formed. Built with modular structure, the case packer has an alternating operation. This system allows the machine to minimize the drawbacks and waste. The machine consists of three main parts:
- Automatic stacking module that groups the products according to the established arrangement. The stacking section is composed of a base, a product feeding belt and a forming group.
- Case shaping module that provides for the opening of the case to allow its subsequent insertion in the bundle. This section consists of a base, the storage and the control panel.
- Case closing module, which closes the lower and upper flaps with tape. The case closing module consists of the base, the transport belts and taping groups.

TECHNICAL DATA
Speed cases/min 16
Frequency Hz 50
Voltage Volt 380
Gross weight Kg 1730

PRODUCTION CHARACTERISTICS
Min dim product (LxWxH) 50 x 20 x 15 mm
Max dim product (LxWxH) 340 x 555 x 120 mm
Min dim bundle (LxWxH) 90 x 180 x 110 mm
Max dim bundle (LxWxH) 340 x 555 x 390 mm

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Output 16 /min
Length max of the case 340 mm
Length min of the case 50 mm
Width max of the case 555 mm
Width min of the case 20 mm
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2009
Offers online 1036
Last activity March 29, 2024

Here is a selection of similar machines

SM Mod. SM 80S - Case packer used