Price on request
Make an offer| Power in tons | 30 T |
| Ram stroke | 40 mm |
| Nbr of strokes/min | 600 |
| ------------------- | |
| Length x width x height | 1100.0 × 1400.0 × 2200.0 |
| Weight | 2500 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | under power |
| Datasheet | Bruderer BSTA 30 |
| Last availability date | 16/04/2026 |
This Silicon BSTA 30 mechanical press offers a maximum pressing force of 30 tons (300 kN) and is designed for high-speed operations with a variable stroke rate up to 600 strokes per minute. The ram stroke ranges from 8 to 40 mm, allowing for adjustable pressing depth depending on application needs. The press features a pneumatic clutch and pneumatic brake system, enhancing operational control and safety. It includes an automatic central lubrication system and a main shaft cooler to support continuous use and reduce wear.
The machine operates with technical air pressure between 6 to 10 bar and has a power consumption ranging from 1.5 to 5.5 kW. It is equipped with three working modes: manual, complete one stroke, and full automatic, allowing flexibility in operation. Programmable speed and number of strokes can be set with digital punching speed readout for precision control. The press also supports a reverse flywheel mode.
Feeding is managed by a Bruderer roll feeder BBV, synchronized on board with options for right to left or left to right feed. It accommodates strip widths up to 150 mm and strip thicknesses up to 3.2 mm. The table height is approximately 1000 mm from the floor, with a surface area of 540 x 300 mm and a hole dimension of 315 x 110 mm. The ram surface diameter measures 250 mm.
Safety is a key feature, with visible safety guards around the pressing area, transparent protective panels, emergency stop buttons, and CE safety guards and relays. A signal tower light with red, orange, and green indicators provides clear operational status. The machine includes a hydraulic or pneumatic cylinder visible on the top section and side, covered by yellow protective guards, and an air filter or pressure regulator mounted at the base.
The press measures approximately 1100 mm in length, 1400 mm in width, and 2200 mm in height, weighing around 2500 kg. The machine appears clean and well-maintained with no visible damage. Electrical connections and power cables are neatly arranged at the base. This press is suitable for precision punching and forming tasks in various industrial applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Press force max. 300 kN
Power consumption from 1.5 to max. 5.5 kW
Technical Air 6-10 bar
Stroke: 8-40 mm
Strokes per minute.: variable from 100-600 spm
With Automatic central lubrication
Main shaft cooler
Pneumatic clutch and pneumatic brake
Three working mode
Programmable speed and number of strokes,
Digital punching speed read out
Reverse flywheel mode
Feeding:
Bruderer roll feeder BBV.
Feeder synchronized on board – right to left / left to right / Optional.
Strip width max 150 mm, strip thickness max. 3.2mm.
Table height from floor 1000 mm.
Table surface area 540 x 300.
Hole in the table 315 x 110 mm.
Ram surface dia. 250 mm.
Dimension ca. 1100 x 1.400 x 2.200 mm.
Weight ca. 2500 kg.
Three working mode: manual, complete one stroke and full automatic.
Emergency stop and all other CE safety guards and relays.
Indexing per minute, infinitely variable.
Automatic in feed, fully synchronized with punching moment.
CE Certificate.
Warranty 6 months.
More Bruderer, Mabu, Bihler and Schaal high speed presses on stock as well Ideal BAS welding machines.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 16 |
| Last activity | April 17, 2026 |
Press force max. 300 kN
Power consumption from 1.5 to max. 5.5 kW
Technical Air 6-10 bar
Stroke: 8-40 mm
Strokes per minute.: variable from 100-600 spm
With Automatic central lubrication
Main shaft cooler
Pneumatic clutch and pneumatic brake
Three working mode
Programmable speed and number of strokes,
Digital punching speed read out
Reverse flywheel mode
Feeding:
Bruderer roll feeder BBV.
Feeder synchronized on board – right to left / left to right / Optional.
Strip width max 150 mm, strip thickness max. 3.2mm.
Table height from floor 1000 mm.
Table surface area 540 x 300.
Hole in the table 315 x 110 mm.
Ram surface dia. 250 mm.
Dimension ca. 1100 x 1.400 x 2.200 mm.
Weight ca. 2500 kg.
Three working mode: manual, complete one stroke and full automatic.
Emergency stop and all other CE safety guards and relays.
Indexing per minute, infinitely variable.
Automatic in feed, fully synchronized with punching moment.
CE Certificate.
Warranty 6 months.
More Bruderer, Mabu, Bihler and Schaal high speed presses on stock as well Ideal BAS welding machines.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Power in tons | 30 T |
| Ram stroke | 40 mm |
| Nbr of strokes/min | 600 |
| ------------------- | |
| Length x width x height | 1100.0 × 1400.0 × 2200.0 |
| Weight | 2500 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | under power |
| Datasheet | Bruderer BSTA 30 |
| Last availability date | 16/04/2026 |
This Silicon BSTA 30 mechanical press offers a maximum pressing force of 30 tons (300 kN) and is designed for high-speed operations with a variable stroke rate up to 600 strokes per minute. The ram stroke ranges from 8 to 40 mm, allowing for adjustable pressing depth depending on application needs. The press features a pneumatic clutch and pneumatic brake system, enhancing operational control and safety. It includes an automatic central lubrication system and a main shaft cooler to support continuous use and reduce wear.
The machine operates with technical air pressure between 6 to 10 bar and has a power consumption ranging from 1.5 to 5.5 kW. It is equipped with three working modes: manual, complete one stroke, and full automatic, allowing flexibility in operation. Programmable speed and number of strokes can be set with digital punching speed readout for precision control. The press also supports a reverse flywheel mode.
Feeding is managed by a Bruderer roll feeder BBV, synchronized on board with options for right to left or left to right feed. It accommodates strip widths up to 150 mm and strip thicknesses up to 3.2 mm. The table height is approximately 1000 mm from the floor, with a surface area of 540 x 300 mm and a hole dimension of 315 x 110 mm. The ram surface diameter measures 250 mm.
Safety is a key feature, with visible safety guards around the pressing area, transparent protective panels, emergency stop buttons, and CE safety guards and relays. A signal tower light with red, orange, and green indicators provides clear operational status. The machine includes a hydraulic or pneumatic cylinder visible on the top section and side, covered by yellow protective guards, and an air filter or pressure regulator mounted at the base.
The press measures approximately 1100 mm in length, 1400 mm in width, and 2200 mm in height, weighing around 2500 kg. The machine appears clean and well-maintained with no visible damage. Electrical connections and power cables are neatly arranged at the base. This press is suitable for precision punching and forming tasks in various industrial applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 16 |
| Last activity | April 17, 2026 |
Silicon BSTA 30
Výstředníkový lis Bruderer BSTA 30
Silicon BSTA 30
Bruderer BSTA 30 Exzenterpresse
Silicon BSTA 30
High Speed Press STA 30/600
Prensa excéntrica Bruderer BSTA 30
Presse excentrique Bruderer BSTA 30
Silicon BSTA 30
Silicon BSTA 30
Pressa eccentrica Bruderer BSTA 30
Silicon BSTA 30
Silicon BSTA 30
Prasa mimośrodowa Bruderer BSTA 30
Silicon BSTA 30
Silicon BSTA 30
Bruderer BSTA 30 Эксцентриковый пресс
Silicon BSTA 30
Silicon BSTA 30
Eksantrik pres Bruderer BSTA 30
EN
- Languages
English (GB)