SIG Blomax 10 b 111 Blowmoulding machine

type: Blomax 10 / B 111
year of manufacture: 1997 / 2000
Maximum output b/ph 14.400
Bottle Dimensions max Volume 3.000 ml
min Volume 200 ml
max Diameter 126 mm
max Length 350 mm
Preform Dimensions 1
max Length 200 mm
min Length 60 mm
max Ø Support Ring 48 mm
min Inner-Ø body 16 mm
min Inner-Ø of orifice 21 mm
max internal-Ø of orifice 30 mm

floor space with vertical conveyor (l x w) 9.4 x 8.4 m
height 3.6 m
blowing wheel modul 9,5 t
heating wheel module 3.2 t
Control cabinet 1.0 t

No. of mandrel supports on the heating wheel 135 Stk. / pcs.

No. of transport mandrels on the heating wheel 125 Stk. / pcs.
No. of transfer arms T1 4 Stk. / pcs.

No. of transfer arms T2 4 Stk. / pcs.
No. of transfer arms T3 4 Stk. / pcs.

No. of loading arms / Loading station 6 Stk / pcs.
Anzahl Blasstationen / No. of blowing stations 10 Stk. / pcs.

No. of stations on the unloading wheel 8 Stk. / pcs.
No. of heater boxes 14 Stk. / pcs.
No. of transport mandrels 145 Stk. / pcs.

Number of turning units / turning wheel 6 Stk. / pcs.

Capacity of the hopper

No. of preforms for 1.5 ltr. bottles ~ 12.000 Stk. / Pcs.

Compressed Air (clean, dry and free of oil)
Service Air 7 bar
Service air consumption³ ~ 140 Nm³/h
Blowing air pressure max. 40 bar

Blowing air consumption for 2 ltr. bottles, 40 bar, 12.000 pcs. ~ 1.247Nm³/h

Sound emission in the working area (control panel) < 85 dbA
Cooling water (with rust preventative)
Water pressure 6,0 bar
Watertemperature 10° C
Flow rate 10 m³/Std. h.
heat to be dissipated 5 40.2 kW
electrical Data

Supply voltage + 3-Phase + neutral wire + protective ground conductor 4
3 x 400 V / 50 Hz + N + PE
internal control voltage110 / 220 / 50 V / Hz
24; 12 V DC
total connected load 210 kVA
Drives and controls 14,2 kVA
heating power 208,8 kW
installed heating capacity 179,2 kW
average consumption 127,0 kW

Pre-fuse of the operator at 380V 3x 315 A
specification VDE 0113
Different dimensions on request
normal state @ 20°C+1013mbar

other voltages and frequencies on request
valid for Preform-weights up to 52 g.