Price on request
Make an offer| Type | |
| Power in tons | 300 T |
| Table length | 1250 mm |
| Table width | 1000 mm |
| Ram stroke | 500 mm |
| Nbr of strokes/min | |
| Working speed | mm/s |
| Distance between columns | 1250 mm |
| Engine Power | 7.5 kW |
| ------------------- | |
| Length x width x height | 2000.0 × 1750.0 × 3300.0 |
| Weight | 14000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Sicmi PSQ 300 A |
| Last availability date | 01/05/2026 |
This listing is for a Sicmi PSQ 300 A four-column hydraulic press with a pressing capacity of 300 tons. The machine features a slide stroke of 500 mm and a frontal passage between columns of 1250 mm, allowing for versatile workpiece accommodation. The lower and top tables both measure 1250 x 1000 mm, providing substantial workspace. The lateral passage between columns is 1000 mm, and the distance between the table and slide is 1000 mm. The press operates with a maximum pressure of 350 bars and is powered by a 7.5 kW engine.
The machine is equipped with a new Siemens digital control system featuring a touchscreen interface. This control allows precise setting of parameters including maximum upward and downward stroke of the hydraulic cylinder, pressure holding time on the lower platform, work pressure, and decompression time. It also includes an alarm management system and a coin counter. The control system supports storage of up to 100 different programs with progressive numbering and offers both manual and automatic operation modes. In automatic mode, the cylinder rises automatically, and the stroke is monitored via a wired encoder. Pressure readings are obtained through a transducer installed on the hydraulic unit.
The press has approach and working speeds of 20 mm/s and 2 mm/s respectively. It measures 2000 mm in length, 1750 mm in width, and 3300 mm in height, with a total weight of approximately 14,000 kg.
Visually, the machine is a large blue mechanical press supported by four vertical columns and features a flat working table. A hydraulic power unit with motor and pump is attached on the right side of the press. Adjacent to the hydraulic unit is a white control panel equipped with buttons and an emergency stop. Protective mesh safety guards are installed on the front and sides of the press. The machine appears clean and well-maintained with no visible rust or damage.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Used SICMI PSQ 300 A 4-column hydraulic press
New Siemens digital control with touch screen.
With the Siemens touchscreen you can set the following parameters:
Maximum upward and downward stroke of the hydraulic cylinder
Pressure holding time on the lower platform
Work pressure
Decompression time
Coin counter
Up/Down Prestop: A function that allows you to stop the ascent or descent before reaching the quota, thus eliminating errors caused by speed and cavitation due to the weight of the mold. It guarantees an accuracy of 0.1 mm.
Alarm management
There is the possibility to store 100 different programs with progressive numbering.
You can choose between manual and automatic modes.
In automatic mode, the cylinder rises automatically.
The race is read using a wired encoder.
The pressure is read using a transducer installed on the hydraulic unit
Power :300 T
Slide stroke:500 mm
Frontal passage between columns:1250 mm
Lateral passage between columns:1000 mm
Passage between table and slide:1000 mm
Approach/working speeds:20/2 mm/sec
Lower table dimensions:1250 x 1000 mm
Top table dimensions:1250 x 1000 mm
Maximum pressure:350 bars
Main engine power:7,5 kW
Dimensions of the machine L x W x H:2000 x 1750 x 3300 mm
Weight :14 000 kg
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 93 |
| Last activity | May 5, 2026 |
Used SICMI PSQ 300 A 4-column hydraulic press
New Siemens digital control with touch screen.
With the Siemens touchscreen you can set the following parameters:
Maximum upward and downward stroke of the hydraulic cylinder
Pressure holding time on the lower platform
Work pressure
Decompression time
Coin counter
Up/Down Prestop: A function that allows you to stop the ascent or descent before reaching the quota, thus eliminating errors caused by speed and cavitation due to the weight of the mold. It guarantees an accuracy of 0.1 mm.
Alarm management
There is the possibility to store 100 different programs with progressive numbering.
You can choose between manual and automatic modes.
In automatic mode, the cylinder rises automatically.
The race is read using a wired encoder.
The pressure is read using a transducer installed on the hydraulic unit
Power :300 T
Slide stroke:500 mm
Frontal passage between columns:1250 mm
Lateral passage between columns:1000 mm
Passage between table and slide:1000 mm
Approach/working speeds:20/2 mm/sec
Lower table dimensions:1250 x 1000 mm
Top table dimensions:1250 x 1000 mm
Maximum pressure:350 bars
Main engine power:7,5 kW
Dimensions of the machine L x W x H:2000 x 1750 x 3300 mm
Weight :14 000 kg
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Type | |
| Power in tons | 300 T |
| Table length | 1250 mm |
| Table width | 1000 mm |
| Ram stroke | 500 mm |
| Nbr of strokes/min | |
| Working speed | mm/s |
| Distance between columns | 1250 mm |
| Engine Power | 7.5 kW |
| ------------------- | |
| Length x width x height | 2000.0 × 1750.0 × 3300.0 |
| Weight | 14000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Sicmi PSQ 300 A |
| Last availability date | 01/05/2026 |
This listing is for a Sicmi PSQ 300 A four-column hydraulic press with a pressing capacity of 300 tons. The machine features a slide stroke of 500 mm and a frontal passage between columns of 1250 mm, allowing for versatile workpiece accommodation. The lower and top tables both measure 1250 x 1000 mm, providing substantial workspace. The lateral passage between columns is 1000 mm, and the distance between the table and slide is 1000 mm. The press operates with a maximum pressure of 350 bars and is powered by a 7.5 kW engine.
The machine is equipped with a new Siemens digital control system featuring a touchscreen interface. This control allows precise setting of parameters including maximum upward and downward stroke of the hydraulic cylinder, pressure holding time on the lower platform, work pressure, and decompression time. It also includes an alarm management system and a coin counter. The control system supports storage of up to 100 different programs with progressive numbering and offers both manual and automatic operation modes. In automatic mode, the cylinder rises automatically, and the stroke is monitored via a wired encoder. Pressure readings are obtained through a transducer installed on the hydraulic unit.
The press has approach and working speeds of 20 mm/s and 2 mm/s respectively. It measures 2000 mm in length, 1750 mm in width, and 3300 mm in height, with a total weight of approximately 14,000 kg.
Visually, the machine is a large blue mechanical press supported by four vertical columns and features a flat working table. A hydraulic power unit with motor and pump is attached on the right side of the press. Adjacent to the hydraulic unit is a white control panel equipped with buttons and an emergency stop. Protective mesh safety guards are installed on the front and sides of the press. The machine appears clean and well-maintained with no visible rust or damage.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 93 |
| Last activity | May 5, 2026 |
Механичен прес Sicmi PSQ 300 A
Mechanický lis Sicmi PSQ 300 A
Sicmi PSQ 300 A mekanisk presse
Mechanische Presse Sicmi PSQ 300 A
Μηχανικό πρέσα Sicmi PSQ 300 A
Sicmi PSQ 300 A Mechanical press
Prensa mecánica Sicmi PSQ 300 A
Presse mécanique Sicmi PSQ 300 A
Mehanički preša Sicmi PSQ 300 A
Sicmi PSQ 300 A mechanikus sajtó
Pressa meccanica Sicmi PSQ 300 A
Mechaninė presa Sicmi PSQ 300 A
Sicmi PSQ 300 A mechanische pers
Prasa mechaniczna Sicmi PSQ 300 A
Prensa mecânica Sicmi PSQ 300 A
Presă mecanică Sicmi PSQ 300 A
Механический пресс Sicmi PSQ 300 A
Механички прес Sicmi PSQ 300 A
Sicmi PSQ 300 A mekanisk press
Sicmi PSQ 300 A Mekanik Pres
EN
- Languages
English (GB)