|Length x width x height||- × - × -|
|Hours under power|
|At local norms||---------|
|Status||visible but unplugged|
Designed for the production of cold-rolled profiles.
Manufacturer: SEN-FUNG / POLAND.
Description: The line is used for the production of profiles of galvanized,
open to the reinforcement of window profiles and thin
by cold rolling.
The thickness of the profiled sheet: 0.5 ÷ 2 mm
The speed profiling: max 40 m / min
Maximum tape width: 208 mm
Maximum capacity rewinder: 2 tons
The maximum diameter of the tape: D = 1540
Type winder: one
The diameter of the shaft working: 63.5 mm
The maximum number of workstations: 12
The cut-off: waste-free, continuous matrix-mech.
The length of the line after installation: 18000 mm
Maximum engine power: 22 KW
Maximum operating pressure: 2 atm.
The unit has instrumentation to:
- open Profiles - type systems: DECEUNINCK, ALUPLAST,
- Profiles U and NA
Condition: the device efficient, removed.
Overall consumption of technical 20%.
The technical documentation and technology for manufactured profiles.
The device has a declaration of conformity.
Please note that this description may have been translated automatically. Contact us for further information.