Name: Production line for profiles and tubes rolled
Manufacturer: Taiwan Sen Fung
Build .: 2,006
Launch Date: 2007
Characteristics of the line: Fully automatic line
for the production of pipes and profiles of rolled steel
Cold welded microcomputer
system of continuous cut (flying saw).
Maximum sheet thickness: 4 mm
Material grade up to S355JR
The demand for compressed air 2100 l / min.
The length of produced profiles: 5.5 -6.0 m ± 3 mm with the possibility of change
Production speed of 66 m / min - for the size Ø25,4 mm and a thickness of 1 mm x 6 m.
Full instrumentation for production of pipes and profiles in the size ranges:
pipe thickness range profiles
Ø25,4 mm (g = 1.0 ÷ 2.0 mm) 20 x 20 mm
Ø31,8 mm (g = 1.0 ÷ 3.0 mm) 25 x 25 mm
Ø35,6 mm (g = 1.0 ÷ 3.0 mm) 30 x 18 mm
Ø38,1 mm (g = 1.0 ÷ 3.0 mm) 30 x 30 mm 20 x 40 mm
Ø50,8 mm (g = 1.5 ÷ 3.0 mm) 40 x 40 mm, 30 x 50 mm
Ø63,5 mm (g = 2.0 ÷ 3.0 mm) 50 x 50 mm, 60 x 40 mm
Ø76,2 mm (g = 2.0 ÷ 4.0 mm) 60 x 60 mm
Ø89,1 mm (g = 2.0 ÷ 4.0 mm) 70 x70 mm
Ø101,6 mm (g = 2.0 ÷ 4.0 mm) 80 x 80 mm
The line consists of:
Power: 2 x 4000 kg
The maximum outer diameter of the tape: 1,500 mm
The internal diameter of the tape: 480 - 510 mm
Width: 320 mm
Storage material in the form of an adjustable annular frame:
Height: 4 m
Length: 8 m
Feed motor 20 hp
The width in the range from 80 to 320 mm.
The input guide:
Upper rollers leveling 2 pcs.
Lower battle leveling: 3 pcs.
The main machine for profiled 7 station
Engine power: 90.1 KW
High frequency welder:
Maximum power: 200 KW
The machine shaped to size 4 stations
Maximum power: 132 KW
Shut-off device - saw flying: up to 11 units per minute for long 6mb.
Automatic table for packing profiles in the pack
Device for automatically measuring the continuity of the weld
Extraction steam oil
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase