362,000 €
Make an offer| Manufacturer | SELWA |
|---|---|
| Model | SE22/5 |
| Year | 2020 |
| Location | Poland
|
| Category | Miscellaneous machines |
| Product id | P220927016 |
| Language |
SELWA SE22/5
SELWA SE22/5
SELWA SE22/5
SELWA SE22/5 Sonstige Artikel
SELWA SE22/5
SELWA SE22/5
SELWA SE22/5
SELWA SE22/5
SELWA SE22/5
SELWA SE22/5
SELWA SE22/5
SELWA SE22/5
SELWA SE22/5
SELWA SE22/5 Suszarnia ziaren/nasion oraz roślin zielarskich
SELWA SE22/5
SELWA SE22/5
SELWA SE22/5
SELWA SE22/5
SELWA SE22/5
SELWA SE22/5
|
| ------------------- | |
| Length x width x height | 22000.0 × 5500.0 × 6000.0 |
| Weight | 20000 kg |
| worked hours | 100 hours |
| hours under power | 100 hours |
| state | like new |
| At local norms | --------- |
| status | visible |
| Last availability date | 27/02/2026 |
This industrial grain, seed, and herbal plant dryer is manufactured by SELWA, model SE22/5, produced in 2020. The machine measures 22,000 mm in length, 5,500 mm in width, and 6,000 mm in height, with an approximate total weight of 20,000 kg.
The dryer features a belt drying system supported by feeder systems that can be either belt or screw types for efficient feeding and receiving of raw materials. It is equipped with an automated control system operated via a touch panel located on the control cabinet, allowing for straightforward operation and precise control.
The dryer is designed to accommodate various energy sources, including gas, heating oil, technical steam, hot water, and waste heat from biogas plants. This flexibility enables energy-efficient drying processes, especially when utilizing waste heat from cooling power generators.
The belt dryer chamber has a modular design, allowing expansion with additional modules. It includes thermal insulation and insulated inspection doors for maintenance access and bearing lubrication. Each module is supported by galvanized steel legs with adjustable height. A sprinkler system is installed above each belt to assist in the drying process, and drain water holes facilitate cleaning.
Conveyor belts made of polyester tapes are used, suitable for loose and fine materials, with a belt width of 2,990 mm. The system includes driving drums for belt movement, mechanisms for spreading raw materials evenly, and a feeder to receive dried materials.
Control features include temperature sensors (2-3 units), speed control of belts, fans, and feeders via inverters, ensuring precise drying conditions. Exhaust fans and ventilation ducts are incorporated to manage airflow.
The heating component is the FPM500 model, designed to generate hot air streams at optimal temperatures set by the control system, with an LPG gas burner supply.
Raw material loading is facilitated by a conveyor belt with an even distribution platform positioned approximately 3,000 mm high. Unloading is performed by a belt feeder with side discharge.
Each drying level operates with its own gear motor drive. The machine operates on a 3 x 400V power supply with a total power consumption of 55 kW.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Dryer for grains / seeds and herbal plants
The dryer includes: belt dryer, feeder systems (belt or screw) for feeding and receiving the raw material, automated control of the dryer from a touch panel located on the control cabinet.
Characteristic
1. Dryer
the possibility of using energy sources such as: gas, heating oil, technical steam, hot water, waste heat from a biogas plant,
when using waste heat in a biogas plant, a heat source is used
from cooling power generators, which results in high savings while promoting ecology,
flexibility of drying various loose materials,
adjusting the work system to different moisture content of the raw material by drying in a continuous or intermittent cycle.
2. Belt dryer chamber
modular design (expandable with additional modules),
thermal isolation,
insulated inspection doors (easy access for maintenance and bearing lubrication),
adjustable height of legs in each module (made of galvanized steel),
sprinkler system above each belt,
drain water holes (cleaning).
3. Conveyor belts
polyester tapes dedicated to loose and fine materials,
belt width: 2990mm,
drive by means of driving drums (in fig. 3),
spreading the raw material on the belt (in fig. 2),
a feeder receiving the dried raw material.
4. Control
automation and simple operation of the device,
control from the touch panel,
temperature sensors (2-3 pcs.),
speed control of belts, fans and feeders by means of an inverter.
5. Fans
exhaust fans (in fig. 7),
ventilation ducts (in fig. 6).
6. Heater
FPM500 model
purpose - generating a stream of hot air with optimal temperature, set by the control system
burner supply - LPG gas
detailed description of the heater and burner in separate documents
7. Loading of raw material
by means of a conveyor belt (in fig. 1),
even distribution of the raw material (stand, platform),
at a height of about 3,000mm.
8. Unloading of raw material: by means of a belt feeder, side discharge.
9. Drive: gear motor for each level separately,
10. Power: 55kW
11. Power supply: 3 x 400V
12. Machine dimensions
length: 22,000mm,
width: 5 500mm,
height: 6,000mm.
13. Total weight: approx. 20,000 kg
14. Production year: 2020
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Factory – large company |
| Active since | 2022 |
| Offers online | 1 |
| Last activity | May 28, 2025 |
Dryer for grains / seeds and herbal plants
The dryer includes: belt dryer, feeder systems (belt or screw) for feeding and receiving the raw material, automated control of the dryer from a touch panel located on the control cabinet.
Characteristic
1. Dryer
the possibility of using energy sources such as: gas, heating oil, technical steam, hot water, waste heat from a biogas plant,
when using waste heat in a biogas plant, a heat source is used
from cooling power generators, which results in high savings while promoting ecology,
flexibility of drying various loose materials,
adjusting the work system to different moisture content of the raw material by drying in a continuous or intermittent cycle.
2. Belt dryer chamber
modular design (expandable with additional modules),
thermal isolation,
insulated inspection doors (easy access for maintenance and bearing lubrication),
adjustable height of legs in each module (made of galvanized steel),
sprinkler system above each belt,
drain water holes (cleaning).
3. Conveyor belts
polyester tapes dedicated to loose and fine materials,
belt width: 2990mm,
drive by means of driving drums (in fig. 3),
spreading the raw material on the belt (in fig. 2),
a feeder receiving the dried raw material.
4. Control
automation and simple operation of the device,
control from the touch panel,
temperature sensors (2-3 pcs.),
speed control of belts, fans and feeders by means of an inverter.
5. Fans
exhaust fans (in fig. 7),
ventilation ducts (in fig. 6).
6. Heater
FPM500 model
purpose - generating a stream of hot air with optimal temperature, set by the control system
burner supply - LPG gas
detailed description of the heater and burner in separate documents
7. Loading of raw material
by means of a conveyor belt (in fig. 1),
even distribution of the raw material (stand, platform),
at a height of about 3,000mm.
8. Unloading of raw material: by means of a belt feeder, side discharge.
9. Drive: gear motor for each level separately,
10. Power: 55kW
11. Power supply: 3 x 400V
12. Machine dimensions
length: 22,000mm,
width: 5 500mm,
height: 6,000mm.
13. Total weight: approx. 20,000 kg
14. Production year: 2020
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| ------------------- | |
| Length x width x height | 22000.0 × 5500.0 × 6000.0 |
| Weight | 20000 kg |
| worked hours | 100 hours |
| hours under power | 100 hours |
| state | like new |
| At local norms | --------- |
| status | visible |
| Last availability date | 27/02/2026 |
This industrial grain, seed, and herbal plant dryer is manufactured by SELWA, model SE22/5, produced in 2020. The machine measures 22,000 mm in length, 5,500 mm in width, and 6,000 mm in height, with an approximate total weight of 20,000 kg.
The dryer features a belt drying system supported by feeder systems that can be either belt or screw types for efficient feeding and receiving of raw materials. It is equipped with an automated control system operated via a touch panel located on the control cabinet, allowing for straightforward operation and precise control.
The dryer is designed to accommodate various energy sources, including gas, heating oil, technical steam, hot water, and waste heat from biogas plants. This flexibility enables energy-efficient drying processes, especially when utilizing waste heat from cooling power generators.
The belt dryer chamber has a modular design, allowing expansion with additional modules. It includes thermal insulation and insulated inspection doors for maintenance access and bearing lubrication. Each module is supported by galvanized steel legs with adjustable height. A sprinkler system is installed above each belt to assist in the drying process, and drain water holes facilitate cleaning.
Conveyor belts made of polyester tapes are used, suitable for loose and fine materials, with a belt width of 2,990 mm. The system includes driving drums for belt movement, mechanisms for spreading raw materials evenly, and a feeder to receive dried materials.
Control features include temperature sensors (2-3 units), speed control of belts, fans, and feeders via inverters, ensuring precise drying conditions. Exhaust fans and ventilation ducts are incorporated to manage airflow.
The heating component is the FPM500 model, designed to generate hot air streams at optimal temperatures set by the control system, with an LPG gas burner supply.
Raw material loading is facilitated by a conveyor belt with an even distribution platform positioned approximately 3,000 mm high. Unloading is performed by a belt feeder with side discharge.
Each drying level operates with its own gear motor drive. The machine operates on a 3 x 400V power supply with a total power consumption of 55 kW.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – large company |
| Active since | 2022 |
| Offers online | 1 |
| Last activity | May 28, 2025 |
EN
- Languages
English (GB)