Sorry, this offer is no longer available on Exapro

SCM SANDYA 7 S Wide belt sander

Here is a selection of similar machines

3 WIDE BELT SANDER, ELECTRONIC POSITIONING TABLE
Brand: SCM
Type: SANDYA 7S
Model: M3 135
Account: R.0025.01
Year: 2004
(Pictures taken before overhaul and cleaning)
MACHINING CAPABILITIES:
- Working width: 52 to 1350 mm
- Height (thickness): 4 to 170 mm
- Minimum piece length: 425mm
COMPOSITION OF THE MACHINE: "R/R/CS"
- Tables with 2 rollers in front and behind width 365 mm
- Self-centering mat and automatic measuring device
- 1st group "R":
1st band Calibration on cylinder Ø160 mm in grooved rigid rubber
- 2nd/3rd "R-CS" groups:
2nd belt Calibration/sanding on cylinder Ø160 mm in grooved semi-rigid rubber
3rd belt Finishing sanding combined grooved soft rubber cylinder and pad
- Motorized brush at output Ø 150 mm
- Brush and sanding roller speed: 22 m/sec
MACHINE FEATURES:
- CE marking
- Belt motor power: 2 x 15 KW (2x20 hp)
- General power supply: 400 v. Three phase 50Hz
- Installed power: 31.9 kW (43.5 hp) IN 65 A
Inverter travel motor: 0.45 to 0.8 kW
- Belt feed speed: 4.5 to 9 m/min
- Padlockable switch, auto star-delta start, front/rear palmswitch stops
- Motor up and down: 0.55 kW
- Brush unit motor: 0.75 kW
- Digital digital height display
- Ammeter per band group
- Belts with grit 80 to 1200
Strip dimensions: 1370 x 2150 mm
- Pneumatic belt tension
- Oscillation of pneumatic bands
- Pneumatic roller retraction
- Pneumatic supply: 6 to 8 bar
- Estimated consumption: 40 to 60 Nl/min
- Suction: 3 upper mouths Ø 150 mm + 1 mouth Ø 160 (brush)
Recommended flow: 6360 m3/h (1590 x4)
Speed 22m/sec
Pressure: 620 (1st band) + 620 (2nd band) + 687 (3rd band) + 1920 Pa (brush group)
Dimensions in working order: 2730 x 1900 x h.2350 mm
Dimensions for transport: 2000 x 1900 x h.2350 mm
Weight: 2500kg

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Working width 1350 mm
Max thickness 170 mm
Type Top
Nbr of units 2
Total installed power 31.9 kW
-------------------
Length x width x height 2730.0 × 1900.0 × 2350.0
Weight 2500 kg
Worked hours
Hours under power
State good
At local norms yes
Status
Datasheet SCM SANDYA 7 S
Client type Reseller
Active since 2019
Offers online 25
Last activity March 28, 2024

Description

3 WIDE BELT SANDER, ELECTRONIC POSITIONING TABLE
Brand: SCM
Type: SANDYA 7S
Model: M3 135
Account: R.0025.01
Year: 2004
(Pictures taken before overhaul and cleaning)
MACHINING CAPABILITIES:
- Working width: 52 to 1350 mm
- Height (thickness): 4 to 170 mm
- Minimum piece length: 425mm
COMPOSITION OF THE MACHINE: "R/R/CS"
- Tables with 2 rollers in front and behind width 365 mm
- Self-centering mat and automatic measuring device
- 1st group "R":
1st band Calibration on cylinder Ø160 mm in grooved rigid rubber
- 2nd/3rd "R-CS" groups:
2nd belt Calibration/sanding on cylinder Ø160 mm in grooved semi-rigid rubber
3rd belt Finishing sanding combined grooved soft rubber cylinder and pad
- Motorized brush at output Ø 150 mm
- Brush and sanding roller speed: 22 m/sec
MACHINE FEATURES:
- CE marking
- Belt motor power: 2 x 15 KW (2x20 hp)
- General power supply: 400 v. Three phase 50Hz
- Installed power: 31.9 kW (43.5 hp) IN 65 A
Inverter travel motor: 0.45 to 0.8 kW
- Belt feed speed: 4.5 to 9 m/min
- Padlockable switch, auto star-delta start, front/rear palmswitch stops
- Motor up and down: 0.55 kW
- Brush unit motor: 0.75 kW
- Digital digital height display
- Ammeter per band group
- Belts with grit 80 to 1200
Strip dimensions: 1370 x 2150 mm
- Pneumatic belt tension
- Oscillation of pneumatic bands
- Pneumatic roller retraction
- Pneumatic supply: 6 to 8 bar
- Estimated consumption: 40 to 60 Nl/min
- Suction: 3 upper mouths Ø 150 mm + 1 mouth Ø 160 (brush)
Recommended flow: 6360 m3/h (1590 x4)
Speed 22m/sec
Pressure: 620 (1st band) + 620 (2nd band) + 687 (3rd band) + 1920 Pa (brush group)
Dimensions in working order: 2730 x 1900 x h.2350 mm
Dimensions for transport: 2000 x 1900 x h.2350 mm
Weight: 2500kg

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Working width 1350 mm
Max thickness 170 mm
Type Top
Nbr of units 2
Total installed power 31.9 kW
-------------------
Length x width x height 2730.0 × 1900.0 × 2350.0
Weight 2500 kg
Worked hours
Hours under power
State good
At local norms yes
Status

About this seller

Client type Reseller
Active since 2019
Offers online 25
Last activity March 28, 2024