Sorry, this offer is no longer available on Exapro

SCM K201 T-R double sided edgebander

Here is a selection of similar machines

- Machine base in steel tubular structure made of high rigidity which is optimum support for operators groups.
- Control panel at the entrance of the machine, in ergonomic position.
- Transport rollers boards over the length of the machine.
- Booth comprehensive protection.
- Electrical installation with main switch with locking device and thermal relays for motor protection.
- Emergency button input and output of the machine.
- Inverter.

Transport system board:
- Driving chain with rubber coated high adhesion fixed on industrial caterpillar skates.
- Sliding of skates is performed on two guides in temperate and rectified steel, one with section
flat, to ensure straightness forward and resistance to lateral loads.
- Higher steel joinery with rubber wheels pressure pression.
- Manual lifting presser with automatic positioning of the operating groups to change
board thickness.
- Digital mechanical indicator selected thickness of the board.

      The machine is also complete:
- Centralized aspiration.
- Inverter.
- Support rollers boards along the entire length of the machine.
- Cabin protection.
- Electrical installation with main switch with possibility of installing a padlock and thermal relays
The motor protection.
- Emergency button.
- Transformer auxiliary circuit 110 V.
Group glue tank, load and pressure of canto:
- Deposit for rapid heating and hot melt glue, teflon inside for easy replacement
from the tail.
- Roll tail diffuser for spreading it on the board.
- Temperature control of glue applied by a digital thermoregulator.
- Device for automatic recovery of unused tail.
- Automatic loader for edges in roll with shear thin edges up to 3 mm thick.
- Automatic loader for edges in rolls and strips with shear edges up to 3 mm thick,
- Complete with economizer device that optimizes the use of singing
Pressure rollers with two rollers of which the first is motor-driven and frictioned.
Both are equipped with mechanical pressure control.
- Automatic lowering of glue temperature tank after a period of nonuse of the machine.
- Adjusting the position of the rollers external pressure outside the cabin protection.

Management system by ORION 200 control

- Numerical control system provided with p.l.c. eliminates the relay and microswitch allowing a simple and immediate all functions of the machine use.
- 100 programs that can adapt to the demands of production
- Graphical display of 5.7 "with 16 colors.
- Function keys parea a quick selection of the working groups.
- Statistical data work.
- Integrated Diagnostics, simple and guided.

Technical data:

Working height: 8-55 mm
Thick edges in strips: 0.4-5 mm
Roll edges thickness (E model): 0.4-3 mm
Boards Minimum width: 65 mm
With singing roll: 60 mm
Minimum length boards with edge roll: 140 mm

gluing group
- Power consumption: 2.4 kW
- Capacity queue: 1.5kg

End cutting unit K / SEL
- Power of each of the motors: 0.35 kg
- Milling rotation speed: 12,000 rpm
- Tilt saws: 0/15 °

Trimmer group RI 100
- Tilt tools: 0/25 °
- Power of each of the motors: 0.35 kW
- Milling rotation speed: 12,000 rpm

SPN brushes Group
- Engine power: 0.55 kW
- Rotation speed: 3,000 rpm
- Chain feed speed: 11 m / min
- Soundproof cabin protection for operators groups
- CE

Work groups:
- 2 tupis diamond milling.
- Glue roller board.
- 2 discs cutting
- Upper and lower repasador
- Group 2 motors forms.
- Upper and lower Rascacantos.
- Cleaning cloths.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Edge thickness 5 mm
Sound-proof cabin Yes
Glue tank Yes
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2020
Offers online 29
Last activity March 28, 2024

Description

- Machine base in steel tubular structure made of high rigidity which is optimum support for operators groups.
- Control panel at the entrance of the machine, in ergonomic position.
- Transport rollers boards over the length of the machine.
- Booth comprehensive protection.
- Electrical installation with main switch with locking device and thermal relays for motor protection.
- Emergency button input and output of the machine.
- Inverter.

Transport system board:
- Driving chain with rubber coated high adhesion fixed on industrial caterpillar skates.
- Sliding of skates is performed on two guides in temperate and rectified steel, one with section
flat, to ensure straightness forward and resistance to lateral loads.
- Higher steel joinery with rubber wheels pressure pression.
- Manual lifting presser with automatic positioning of the operating groups to change
board thickness.
- Digital mechanical indicator selected thickness of the board.

      The machine is also complete:
- Centralized aspiration.
- Inverter.
- Support rollers boards along the entire length of the machine.
- Cabin protection.
- Electrical installation with main switch with possibility of installing a padlock and thermal relays
The motor protection.
- Emergency button.
- Transformer auxiliary circuit 110 V.
Group glue tank, load and pressure of canto:
- Deposit for rapid heating and hot melt glue, teflon inside for easy replacement
from the tail.
- Roll tail diffuser for spreading it on the board.
- Temperature control of glue applied by a digital thermoregulator.
- Device for automatic recovery of unused tail.
- Automatic loader for edges in roll with shear thin edges up to 3 mm thick.
- Automatic loader for edges in rolls and strips with shear edges up to 3 mm thick,
- Complete with economizer device that optimizes the use of singing
Pressure rollers with two rollers of which the first is motor-driven and frictioned.
Both are equipped with mechanical pressure control.
- Automatic lowering of glue temperature tank after a period of nonuse of the machine.
- Adjusting the position of the rollers external pressure outside the cabin protection.

Management system by ORION 200 control

- Numerical control system provided with p.l.c. eliminates the relay and microswitch allowing a simple and immediate all functions of the machine use.
- 100 programs that can adapt to the demands of production
- Graphical display of 5.7 "with 16 colors.
- Function keys parea a quick selection of the working groups.
- Statistical data work.
- Integrated Diagnostics, simple and guided.

Technical data:

Working height: 8-55 mm
Thick edges in strips: 0.4-5 mm
Roll edges thickness (E model): 0.4-3 mm
Boards Minimum width: 65 mm
With singing roll: 60 mm
Minimum length boards with edge roll: 140 mm

gluing group
- Power consumption: 2.4 kW
- Capacity queue: 1.5kg

End cutting unit K / SEL
- Power of each of the motors: 0.35 kg
- Milling rotation speed: 12,000 rpm
- Tilt saws: 0/15 °

Trimmer group RI 100
- Tilt tools: 0/25 °
- Power of each of the motors: 0.35 kW
- Milling rotation speed: 12,000 rpm

SPN brushes Group
- Engine power: 0.55 kW
- Rotation speed: 3,000 rpm
- Chain feed speed: 11 m / min
- Soundproof cabin protection for operators groups
- CE

Work groups:
- 2 tupis diamond milling.
- Glue roller board.
- 2 discs cutting
- Upper and lower repasador
- Group 2 motors forms.
- Upper and lower Rascacantos.
- Cleaning cloths.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Edge thickness 5 mm
Sound-proof cabin Yes
Glue tank Yes
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2020
Offers online 29
Last activity March 28, 2024