Controls Siemens S7
Press Design
drive system: eccentric / crank
frame design: H-frame, tie rod
openings in uprights: yes
number of suspensions: 4
opening in table: yes
quick die change system: yes
moving bolster design: front (T-track)
feedstock transport direction: left to right
Press forces
total force (nominal): 630 to
Press Table
table surface (left-right): 4200 mm
table surface (front-back): 2000 mm
height above floor level: 0 mm
Slide
table surface (left-right): 4200 mm
table surface (front-back): 2000 mm
stroke: 400 mm
stroke rate (max.): 40 /min
slide (mechan. Press)
slide adjustment: 200 mm
Tool Assembly Dimensions
shut height (stroke down, adjustment up), BDC: 1000 mm
distance between columns (H-frame): 4470 mm
passline opening (free passage in side columns): 2500 mm
free passage between side columns (height): 2260 mm
Coil Chair
max. weight of coil: 10 to
Decoiler
design: single reel
sheet width max: 200 mm
sheet width (min): 1500 mm
max. weight of coil: 10 to
max. diameter of coil: 1900 mm
mandrel expansion range from: 470 mm
mandrel expansion range up to: 520 mm
Crop Shear
sheet thickness max: 5 mm
working width max.: 1000 mm
Leveller Unit
sheet width max: 1500 mm
sheet width (min): 200 mm
sheet thickness max: 4 mm
sheet thickness (min): 0.5 mm
material cross section max. (450 N/mm2): 2400 mm²
number of leveller rolls: 9
distance between leveller rolls: 50 mm
number of infeed-/outfeed rolls: 2
diameter of feed rolls: 100 mm
feed velocity max.: 32 m/min
drive power: 11 kW
loop controls: yes
Strip-Feeder
feeder type: roll feeder
sheet width max: 1500 mm
sheet thickness max: 4 mm
feeding step min.: 0 mm
feeding step max.: 9999.99 mm
speed (max): 100 m/min
Transfer System
distance between tools, stroke X max.: 700 mm
distance between tools, stroke X min.: 0 mm
stroke Y max.: 300 mm
stroke Y min.: 0 mm
stroke Z max.: 80 mm
stroke Z min.: 0 mm
Inner width clamping rails closed max.: 600 mm
Inner width clamping rails closed min.: 600 mm
Inner width clamping rails open max.: 1900 mm
Electrical specifications
total power consumption: 165.5 kW
mains voltage: 400 V
mains frequency: 50 Hz
Dimensions / weights
space requirements -left/right-: 6100 mm
space requirements -front/back-: 3900 mm
total height: 7950 mm
height above floor level: 5700 mm
height under floor level: 2250 mm
total weight approx.: 218000 kg

Attachments (presses)
moving bolster design: front (T-track)
decoiler
leveller unit
strip feeder
feeder type: roll feeder
waste cutter
press automation
gripper transfer system
safety guard / safety door
2-hand engagement
acc. to actual accident protection regulation
European CE standards

this extra information is standard for this model. Please always double-check the details during a visit

The Arisa S-4-630-420-200-FDE eccentric press, manufactured in 1998, is a versatile and robust machine designed for a wide range of metalworking applications. This press is particularly known for its reliability, precision, and high-performance capabilities.

With a pressing force of 630 tons, the Arisa S-4-630-420-200-FDE is suitable for shaping, stamping, and forming various metal materials. Its 420 mm stroke length allows for deep drawing and complex forming operations, making it an ideal choice for industries such as automotive, aerospace, and appliance manufacturing.

The machine is equipped with advanced features, including a high-speed adjustable stroke, automatic die height adjustment, and a modern control system, enabling operators to set up and operate the press with ease. This enhances productivity and ensures consistent results.

The Arisa S-4-630-420-200-FDE eccentric press is built with a rigid frame and excellent vibration damping properties, which contribute to its precision and accuracy during the metalworking process. The machine's reliability, combined with its long service life, makes it a valuable asset for industrial settings.

In summary, the Arisa S-4-630-420-200-FDE eccentric press, dating back to 1998, offers substantial pressing force, advanced features, and durability, making it an excellent choice for various metal forming and stamping applications in heavy-duty manufacturing environments.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Power in tons 630 T
Table length 4200 mm
Table width 2000 mm
Ram stroke 400 mm
Nbr of strokes/min 40
Distance between columns 4470 mm
Motor power 11 kW
-------------------
Length x width x height 6100.0 × 3900.0 × 7950.0
Weight 218000 kg
Worked hours
Hours under power
State good
At local norms yes
Status
Client type Reseller
Active since 2009
Offers online 45
Last activity March 26, 2024

Description

Controls Siemens S7
Press Design
drive system: eccentric / crank
frame design: H-frame, tie rod
openings in uprights: yes
number of suspensions: 4
opening in table: yes
quick die change system: yes
moving bolster design: front (T-track)
feedstock transport direction: left to right
Press forces
total force (nominal): 630 to
Press Table
table surface (left-right): 4200 mm
table surface (front-back): 2000 mm
height above floor level: 0 mm
Slide
table surface (left-right): 4200 mm
table surface (front-back): 2000 mm
stroke: 400 mm
stroke rate (max.): 40 /min
slide (mechan. Press)
slide adjustment: 200 mm
Tool Assembly Dimensions
shut height (stroke down, adjustment up), BDC: 1000 mm
distance between columns (H-frame): 4470 mm
passline opening (free passage in side columns): 2500 mm
free passage between side columns (height): 2260 mm
Coil Chair
max. weight of coil: 10 to
Decoiler
design: single reel
sheet width max: 200 mm
sheet width (min): 1500 mm
max. weight of coil: 10 to
max. diameter of coil: 1900 mm
mandrel expansion range from: 470 mm
mandrel expansion range up to: 520 mm
Crop Shear
sheet thickness max: 5 mm
working width max.: 1000 mm
Leveller Unit
sheet width max: 1500 mm
sheet width (min): 200 mm
sheet thickness max: 4 mm
sheet thickness (min): 0.5 mm
material cross section max. (450 N/mm2): 2400 mm²
number of leveller rolls: 9
distance between leveller rolls: 50 mm
number of infeed-/outfeed rolls: 2
diameter of feed rolls: 100 mm
feed velocity max.: 32 m/min
drive power: 11 kW
loop controls: yes
Strip-Feeder
feeder type: roll feeder
sheet width max: 1500 mm
sheet thickness max: 4 mm
feeding step min.: 0 mm
feeding step max.: 9999.99 mm
speed (max): 100 m/min
Transfer System
distance between tools, stroke X max.: 700 mm
distance between tools, stroke X min.: 0 mm
stroke Y max.: 300 mm
stroke Y min.: 0 mm
stroke Z max.: 80 mm
stroke Z min.: 0 mm
Inner width clamping rails closed max.: 600 mm
Inner width clamping rails closed min.: 600 mm
Inner width clamping rails open max.: 1900 mm
Electrical specifications
total power consumption: 165.5 kW
mains voltage: 400 V
mains frequency: 50 Hz
Dimensions / weights
space requirements -left/right-: 6100 mm
space requirements -front/back-: 3900 mm
total height: 7950 mm
height above floor level: 5700 mm
height under floor level: 2250 mm
total weight approx.: 218000 kg

Attachments (presses)
moving bolster design: front (T-track)
decoiler
leveller unit
strip feeder
feeder type: roll feeder
waste cutter
press automation
gripper transfer system
safety guard / safety door
2-hand engagement
acc. to actual accident protection regulation
European CE standards

this extra information is standard for this model. Please always double-check the details during a visit

The Arisa S-4-630-420-200-FDE eccentric press, manufactured in 1998, is a versatile and robust machine designed for a wide range of metalworking applications. This press is particularly known for its reliability, precision, and high-performance capabilities.

With a pressing force of 630 tons, the Arisa S-4-630-420-200-FDE is suitable for shaping, stamping, and forming various metal materials. Its 420 mm stroke length allows for deep drawing and complex forming operations, making it an ideal choice for industries such as automotive, aerospace, and appliance manufacturing.

The machine is equipped with advanced features, including a high-speed adjustable stroke, automatic die height adjustment, and a modern control system, enabling operators to set up and operate the press with ease. This enhances productivity and ensures consistent results.

The Arisa S-4-630-420-200-FDE eccentric press is built with a rigid frame and excellent vibration damping properties, which contribute to its precision and accuracy during the metalworking process. The machine's reliability, combined with its long service life, makes it a valuable asset for industrial settings.

In summary, the Arisa S-4-630-420-200-FDE eccentric press, dating back to 1998, offers substantial pressing force, advanced features, and durability, making it an excellent choice for various metal forming and stamping applications in heavy-duty manufacturing environments.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Power in tons 630 T
Table length 4200 mm
Table width 2000 mm
Ram stroke 400 mm
Nbr of strokes/min 40
Distance between columns 4470 mm
Motor power 11 kW
-------------------
Length x width x height 6100.0 × 3900.0 × 7950.0
Weight 218000 kg
Worked hours
Hours under power
State good
At local norms yes
Status

About this seller

Client type Reseller
Active since 2009
Offers online 45
Last activity March 26, 2024

Here is a selection of similar machines

Arisa S-4-630-420-200-FDE Eccentric press