Price on request
Make an offer| Power in tons | 25 T |
| Table length | 440 mm |
| Table width | 320 mm |
| Ram stroke | 100 mm |
| Engine Power | 7.5 kW |
| ------------------- | |
| Length x width x height | 1300.0 × 1200.0 × 2200.0 |
| Weight | 1200 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | SCHÖN SH 25 |
| Last availability date | 15/04/2026 |
This SCHÖN SH 25 hydraulic press, manufactured in 1999, is designed for industrial pressing applications requiring a pressure output of 25 tons. The machine features a robust construction with overall dimensions of 1300 mm in length, 1200 mm in width, and 2200 mm in height, weighing approximately 1200 kg. It is powered by a 7.5 kW motor operating on a 380 Volt, 50 Hz mains connection.
The pressing area includes a table surface measuring 440 x 320 mm with an opening diameter of 175 mm. The ram has a surface of 360 x 220 mm and a maximum stroke of 100 mm, with an installation height reaching up to 270 mm. The table height above the floor is 900 mm, providing ergonomic access for operation.
Safety features include SICK FGS 300-11 type safety light curtains installed on both sides of the pressing area, enhancing operator protection. The press is controlled via a white panel located on the right side, equipped with multiple buttons, switches, and gauges for precise operation. An emergency stop button is integrated into a white foot pedal control at the front of the machine for immediate shutdown if needed.
Operational capabilities include two-hand operation, a stroke counter, rapid and working stroke modes, pressure or path-dependent stroke limitation, and a mechanically adjustable fixed stop. Additional functions are press force regulation, press time extension adjustable from 1 to 10 seconds for pressure holding, time setting for return stroke speed, and a blow-out device that is electrically pre-equipped but requires an air valve. A hydraulic tool safety device is also present, adjustable manually via a handwheel.
The machine's condition shows visible paint wear, scratches, and some chipped paint on the lower front and side areas of the body, consistent with typical industrial use. Cables and power cords are visible behind the machine. The press is offered as-is, where-is, and is suitable for buyers seeking a well-equipped hydraulic press with comprehensive safety and operational features.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Manufacturer: SCHÖN
Model: SH 25
Year of Manufacture: 1999
Pressure Output: 25 tons
Column Width: 500 mm
Column Passage Side: 120 mm
Table Surface: 440 x 320 mm
Table Opening: Ø 175 mm
Ram Surface: 360 x 220 mm
Clamping Pin Bore: Ø 40 mm
Ram Stroke Max: 100 mm
Installation Height Max: 270 mm
Table Height Above Floor: 900 mm
Motor Power: 7.5 KW
Mains Connection: 380 Volt, 50 Hz
Safety Light Barrier: SICK, type FGS 300-11
Operation: 2-hand operation
Features: Stroke counter, Rapid stroke and working stroke, Pressure or path-dependent stroke limitation, Mechanically adjustable fixed stop, Press force regulation, Press time extension 1-10 s (pressure holding time), Time setting for the return stroke speed, Blow-out device electrically pre-equipped without air valve, Hydraulic tool safety device, manually adjustable via handwheel
Space Requirement (L x W x H): 1300 x 1200 x 2200 mm
Weight: Approx. 1200 kg
Condition: Good condition, as-is, where-is
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 63 |
| Last activity | April 16, 2026 |
Manufacturer: SCHÖN
Model: SH 25
Year of Manufacture: 1999
Pressure Output: 25 tons
Column Width: 500 mm
Column Passage Side: 120 mm
Table Surface: 440 x 320 mm
Table Opening: Ø 175 mm
Ram Surface: 360 x 220 mm
Clamping Pin Bore: Ø 40 mm
Ram Stroke Max: 100 mm
Installation Height Max: 270 mm
Table Height Above Floor: 900 mm
Motor Power: 7.5 KW
Mains Connection: 380 Volt, 50 Hz
Safety Light Barrier: SICK, type FGS 300-11
Operation: 2-hand operation
Features: Stroke counter, Rapid stroke and working stroke, Pressure or path-dependent stroke limitation, Mechanically adjustable fixed stop, Press force regulation, Press time extension 1-10 s (pressure holding time), Time setting for the return stroke speed, Blow-out device electrically pre-equipped without air valve, Hydraulic tool safety device, manually adjustable via handwheel
Space Requirement (L x W x H): 1300 x 1200 x 2200 mm
Weight: Approx. 1200 kg
Condition: Good condition, as-is, where-is
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Power in tons | 25 T |
| Table length | 440 mm |
| Table width | 320 mm |
| Ram stroke | 100 mm |
| Engine Power | 7.5 kW |
| ------------------- | |
| Length x width x height | 1300.0 × 1200.0 × 2200.0 |
| Weight | 1200 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | SCHÖN SH 25 |
| Last availability date | 15/04/2026 |
This SCHÖN SH 25 hydraulic press, manufactured in 1999, is designed for industrial pressing applications requiring a pressure output of 25 tons. The machine features a robust construction with overall dimensions of 1300 mm in length, 1200 mm in width, and 2200 mm in height, weighing approximately 1200 kg. It is powered by a 7.5 kW motor operating on a 380 Volt, 50 Hz mains connection.
The pressing area includes a table surface measuring 440 x 320 mm with an opening diameter of 175 mm. The ram has a surface of 360 x 220 mm and a maximum stroke of 100 mm, with an installation height reaching up to 270 mm. The table height above the floor is 900 mm, providing ergonomic access for operation.
Safety features include SICK FGS 300-11 type safety light curtains installed on both sides of the pressing area, enhancing operator protection. The press is controlled via a white panel located on the right side, equipped with multiple buttons, switches, and gauges for precise operation. An emergency stop button is integrated into a white foot pedal control at the front of the machine for immediate shutdown if needed.
Operational capabilities include two-hand operation, a stroke counter, rapid and working stroke modes, pressure or path-dependent stroke limitation, and a mechanically adjustable fixed stop. Additional functions are press force regulation, press time extension adjustable from 1 to 10 seconds for pressure holding, time setting for return stroke speed, and a blow-out device that is electrically pre-equipped but requires an air valve. A hydraulic tool safety device is also present, adjustable manually via a handwheel.
The machine's condition shows visible paint wear, scratches, and some chipped paint on the lower front and side areas of the body, consistent with typical industrial use. Cables and power cords are visible behind the machine. The press is offered as-is, where-is, and is suitable for buyers seeking a well-equipped hydraulic press with comprehensive safety and operational features.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 63 |
| Last activity | April 16, 2026 |
Хидравлична преса SCHÖN SH 25
Hydraulický lis SCHÖN SH 25
SCHÖN SH 25 Hydraulisk presse
SCHÖN SH 25 Hydraulikpresse
Υδραυλική πίεση SCHÖN SH 25
SCHÖN SH 25 Hydraulic press
Prensa hidráulica SCHÖN SH 25
Presse hydraulique SCHÖN SH 25
Hidraulična preša SCHÖN SH 25
SCHÖN SH 25 Hidraulikus nyomás
Pressa idraulica SCHÖN SH 25
Hidraulinis presas SCHÖN SH 25
SCHÖN SH 25 Hydraulische pers
Prasa hydrauliczna SCHÖN SH 25
Pressão hidráulica SCHÖN SH 25
Presa hidraulica SCHÖN SH 25
SCHÖN SH 25 Гидравлический пресс
Hidraulična presa SCHÖN SH 25
SCHÖN SH 25 Hydraulisk press
Hidrolik Pres SCHÖN SH 25
EN
- Languages
English (GB)