Price on request
Make an offer| Stroke length | 800 mm |
| ------------------- | |
| Length x width x height | 2000.0 × 1440.0 × 4000.0 |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 02/04/2026 |
This listing is for a Schloemann 1000-ton forging press equipped with a 3-ton Dango manipulator, manufactured in 1985. The press has a maximum compressing force of 1000 MPa and operates at a running pressure of 315 kp/cm². It features a piston stroke length of 800 mm and a clear space between gripping surfaces of 2250 mm. The stand dimensions are 2000 mm in length and 1440 mm in width, with a maximum press height of 4000 mm. The stroke of the regulation device is 2 x 900 mm, and the maximum depth of the foundation required is 5000 mm.
The press includes a hydraulic installation consisting of multiple pumps: two hydraulic pumps type Fabrikat Nepuko RP315-500 with adjustable radial flow rates of 715 l/min at 200 kp/cm² and 450 l/min at 315 kp/cm², operating at 750 rpm with starting power around 20 kW; a filling pump with an operation pressure of 4 kp/cm², flow rate of 1300 l/min, starting power of 22 kW, and 3000 rpm; and a cooling pump with similar specifications as the filling pump. Each hydraulic pump is equipped with lubricating pumps, pressure sensors, filters, recirculation equipment, and safety valves.
The oil supply installation includes an ND oil pump with a running pressure of 100 kp/cm², flow rate of 180 l/min, operating spindle power of 37 kW at 1500 rpm, an electrically driven valve, pressure switch, safety valve for the running circuit, and a second ND oil pump with a total capacity of 2 x 32 l/min and useful capacity of 131 mm.
The press is described as having been used very little in terms of mechanical and hydraulic operation but requires a new control system. Documentation is available for the machine.
The machine shows signs of wear and rust consistent with industrial use and storage, including visible corrosion on metal parts. It is supported by four large cylindrical columns and features a central pressing ram. Hydraulic cylinders and piping are visible within the machine frame. The press is located inside a large industrial warehouse environment. Potential buyers should note the condition reflects age and use, and the control system needs replacement.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Forging Equipment
Capacity : 1000 tons,
With 3 ton DANGO manipulator,
Running pressure : 315 kp/cm2,
Compressing force : 1000 Mp,
Retraction force : 240 Mp,
Piston stroke : 800 mm,
Clear space between gripping surface : 2250 mm,
Dimensions of the stand : 2000 x 1440 mm,
Stroke of the regulation device : 2 x 900 mm,
Maximum press height : 4000 mm,
maximum depth of the foundation : 5000 mm,
Speed and Performances :-
Speed of descent : 250 mm,
Compressing speed : 110 mm,
Retraction speed : 250 mm,
Start - up :-
Hydraulic installation (HD) for the press operation consists in .
1) Hydraulic pumps type Fabrikat Nepuko, RP315-500, adjustable radial :
Flow rate for 200kp/cm2 : 715 1/min,
Flow rate for 315 kp/cm2 : 450 1/min,
Number of rotations per minute : 750 U/min,
Starting power : ca 20 kW,
2) Filling Pump :-
Operation pressure : 4 kp/cm2,
Flow rate : 1300 1/min,
Starting power : 22 kW,
Number of rotations per minute : 3000 U/min,
3) Cooling pump :-
Operation pressure : 4 kp/cm2,
Flow rate : 1300 1/min,
Working power : 22 kW,
Number of rotations per minute : 3000 U/min.
For each hydraulic pump consisting in :-
Lubricating pump,
Pressure sensors,
Filter,
Recirculation equipment,
Safety valve.
An oil supply installation consist in :-
1) ND oil pump,
Running pressure : 100 kp/cm2,
Flow rate : 180 1/min,
Operation spindle power : 37 kW,
Number of rotations per minute : 1500 U/min,
2) Electrically driven valve,
3) Pressure switch,
4) Safety valve for the running circuit and all required off shuttings,
5) ND oil pump with mountings,
Running pressure : 100 kp/cm2,
Total capacity : 2 x 32 1/mm,
Useful capacity : 131 mm,
1000 tons Schloemann press wit Dango manipulator, The press is very little used as mechanic and hydraulic.
Need new control.
The documentation is available
Item Condition: Good Condition
Capacity Tons: 1000
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 20, 2026 |
Forging Equipment
Capacity : 1000 tons,
With 3 ton DANGO manipulator,
Running pressure : 315 kp/cm2,
Compressing force : 1000 Mp,
Retraction force : 240 Mp,
Piston stroke : 800 mm,
Clear space between gripping surface : 2250 mm,
Dimensions of the stand : 2000 x 1440 mm,
Stroke of the regulation device : 2 x 900 mm,
Maximum press height : 4000 mm,
maximum depth of the foundation : 5000 mm,
Speed and Performances :-
Speed of descent : 250 mm,
Compressing speed : 110 mm,
Retraction speed : 250 mm,
Start - up :-
Hydraulic installation (HD) for the press operation consists in .
1) Hydraulic pumps type Fabrikat Nepuko, RP315-500, adjustable radial :
Flow rate for 200kp/cm2 : 715 1/min,
Flow rate for 315 kp/cm2 : 450 1/min,
Number of rotations per minute : 750 U/min,
Starting power : ca 20 kW,
2) Filling Pump :-
Operation pressure : 4 kp/cm2,
Flow rate : 1300 1/min,
Starting power : 22 kW,
Number of rotations per minute : 3000 U/min,
3) Cooling pump :-
Operation pressure : 4 kp/cm2,
Flow rate : 1300 1/min,
Working power : 22 kW,
Number of rotations per minute : 3000 U/min.
For each hydraulic pump consisting in :-
Lubricating pump,
Pressure sensors,
Filter,
Recirculation equipment,
Safety valve.
An oil supply installation consist in :-
1) ND oil pump,
Running pressure : 100 kp/cm2,
Flow rate : 180 1/min,
Operation spindle power : 37 kW,
Number of rotations per minute : 1500 U/min,
2) Electrically driven valve,
3) Pressure switch,
4) Safety valve for the running circuit and all required off shuttings,
5) ND oil pump with mountings,
Running pressure : 100 kp/cm2,
Total capacity : 2 x 32 1/mm,
Useful capacity : 131 mm,
1000 tons Schloemann press wit Dango manipulator, The press is very little used as mechanic and hydraulic.
Need new control.
The documentation is available
Item Condition: Good Condition
Capacity Tons: 1000
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Stroke length | 800 mm |
| ------------------- | |
| Length x width x height | 2000.0 × 1440.0 × 4000.0 |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 02/04/2026 |
This listing is for a Schloemann 1000-ton forging press equipped with a 3-ton Dango manipulator, manufactured in 1985. The press has a maximum compressing force of 1000 MPa and operates at a running pressure of 315 kp/cm². It features a piston stroke length of 800 mm and a clear space between gripping surfaces of 2250 mm. The stand dimensions are 2000 mm in length and 1440 mm in width, with a maximum press height of 4000 mm. The stroke of the regulation device is 2 x 900 mm, and the maximum depth of the foundation required is 5000 mm.
The press includes a hydraulic installation consisting of multiple pumps: two hydraulic pumps type Fabrikat Nepuko RP315-500 with adjustable radial flow rates of 715 l/min at 200 kp/cm² and 450 l/min at 315 kp/cm², operating at 750 rpm with starting power around 20 kW; a filling pump with an operation pressure of 4 kp/cm², flow rate of 1300 l/min, starting power of 22 kW, and 3000 rpm; and a cooling pump with similar specifications as the filling pump. Each hydraulic pump is equipped with lubricating pumps, pressure sensors, filters, recirculation equipment, and safety valves.
The oil supply installation includes an ND oil pump with a running pressure of 100 kp/cm², flow rate of 180 l/min, operating spindle power of 37 kW at 1500 rpm, an electrically driven valve, pressure switch, safety valve for the running circuit, and a second ND oil pump with a total capacity of 2 x 32 l/min and useful capacity of 131 mm.
The press is described as having been used very little in terms of mechanical and hydraulic operation but requires a new control system. Documentation is available for the machine.
The machine shows signs of wear and rust consistent with industrial use and storage, including visible corrosion on metal parts. It is supported by four large cylindrical columns and features a central pressing ram. Hydraulic cylinders and piping are visible within the machine frame. The press is located inside a large industrial warehouse environment. Potential buyers should note the condition reflects age and use, and the control system needs replacement.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 20, 2026 |
Преса „Schloemann“ с капацитет 1000 тона и манипулатор „Dango“
Lis Schloemann o kapacitě 1000 tun s manipulátorem Dango
Schloemann 1000 tons med Dango-manipulatorpresse
Schloemann 1000-Tonnen-Presse mit Dango-Manipulator
Πρέσα Schloemann 1000 τόνων με χειριστή Dango
Schloemann 1000 tons with Dango manipulator Press
Prensa Schloemann de 1000 toneladas con manipulador Dango
Presse Schloemann de 1 000 tonnes équipée d'un manipulateur Dango
Schloemann 1000 tona s Dango manipulatorom
Schloemann 1000 tonnás sajtógép Dango manipulátorral
Pressa Schloemann da 1000 tonnellate con manipolatore Dango
„Schloemann“ 1000 tonų presas su „Dango“ manipuliatoriumi
Schloemann 1000 ton met Dango-manipulatorpers
Prasa Schloemann o wydajności 1000 ton z manipulatorem Dango
Prensa Schloemann de 1000 toneladas com manipulador Dango
Presă Schloemann de 1000 de tone cu manipulator Dango
Пресс Schloemann грузоподъемностью 1000 тонн с манипулятором Dango
Šloeman 1000 tona sa Dango manipulatorom Press
Schloemann 1000 ton med Dango-manipulatorpress
Schloemann 1000 tonluk Dango manipülatörlü pres
EN
- Languages
English (GB)