58,500 €
Make an offerContact us to receive an offer.
| ------------------- | |
| Length x width x height | 18700.0 × 2700.0 × 4700.0 |
| Weight | 2000 kg |
| worked hours | 2600 hours |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | being refitted |
| Last availability date | 04/08/2025 |
The Schlick RB 1250 is a large industrial machine manufactured in 1987, designed primarily for blasting operations. It measures 18.7 meters in length, 2.7 meters in width, and 4.7 meters in height, with a total weight of approximately 2,000 kg. The length includes two adjustable roller tables with roller lengths of 5.6 meters and 5.1 meters respectively. The blasting chamber features an entrance width of 1250 mm and a height of 500 mm, suitable for handling sizable materials.
Powering the machine are four turbines, each rated at 7.5 kW (model 4-EM-SR-1), supported by a total of 11 electric motors. The machine operates on a total power supply of 50.2 kW at 380 V, 50 Hz, and 160 A. It includes a compressed air system requiring a pressure between 5 to 7 bar and a demand of 30 m³/h. The automatic feeding table can support a load capacity of up to 500 kg per roll, with material speed adjustable continuously between 0.4 and 2.6 meters per minute. The height to the top edge of the roller conveyor is 1110 mm.
This machine was purchased used in 2007 from a container factory and has been undergoing a general overhaul since. It has been out of service since 2005 and is currently in the final stages of renovation, requiring completion by the buyer. The overhaul includes repairs with original parts, new turbine components, new air cleaning filters (12 pieces), soundproofing materials for side inspection booths, and 650 kg of manganese steel sheets for lining the blasting chamber. The original documentation, including the DTR book with construction drawings and electrical diagrams, is available along with extensive photographic material.
Visually, the machine is painted blue with open grey metal doors at the front revealing yellow motors or gearboxes inside. A metal railing is installed on top for safety and maintenance access. The machine appears structurally intact but shows some surface wear and minor rust on the doors. It is situated indoors on a concrete floor among other equipment.
The machine can be viewed by appointment in Czernichów, approximately 12 km from Krakow towards Auschwitz. Individual turbines and other components can be operated for inspection purposes on site. Interested buyers should note that the machine is sold as-is and requires finishing the renovation work.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Machine: RB 1250 SCHLICK - under renovation
Year of construction: 1987r.
Mileage: ~ 2,600 motor hours (small in relation to the expected life of the machine)
On auctions machines with mileage of 30-40 thousand hours.
Length: 18.7m (including two adjustable roller tables - rollers with lengths of 5.6m and 5.1m respectively)
Width: 2.7m
Height: 4.7m
Weight: about 20 tons - weight not specified by the manufacturer in the DTR, weight given on the basis of data
of comparable machines.
Blasting chamber entrance width: 1250 mm
Height of the blasting chamber entrance: 500 mm
Number of turbines: 4 x 7.5KW model 4-EM-SR-1
Number of electric motors: 11 pcs.
Load capacity of a single roll of the automatic feeding table: 500 kg
Height to the top edge of the roller conveyor: 1110 mm
Material speed: 0.4 - 2.6 m/min (infinitely adjustable)
Total power: 50.2 KW / 50Hz / 160 A / 380V
Compressed air system pressure: 5-7 bar
Compressed air system demand: 30 m3/h
Machine documentation: original DTR book (with construction drawings and
electrical diagrams) and own materials (including photos ~ 1000 pcs)
Condition : Used machine purchased in 2007 from a container factory in bankruptcy and sent for a general
overhaul - currently in its last stage. Machine out of service since 2005. The machine repaired
on original parts. Included with the machine (in addition to new and already built components such as
turbine components) are new filters for the air cleaning station (12 pcs.), soundproofing materials for the
side inspection booths, manganese steel sheets (650kg) for lining the blasting chamber. Value
materials accumulated for incorporation - tens of thousands of zlotys.
The device can be viewed by appointment in Czernichów, ul, Przemysłowa 6 (12 km behind the
Krakow in the direction of Auschwitz). Possibility to run individually turbines and other components.
Contact information:
Machine in the process of renovation as in the photos - Requires completion of work by the buyer. Condition of the machine to see on site.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| schlick-schlick-rb-1250-p250401302_4.pdf | Download |
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 1 |
| Last activity | April 2, 2025 |
Machine: RB 1250 SCHLICK - under renovation
Year of construction: 1987r.
Mileage: ~ 2,600 motor hours (small in relation to the expected life of the machine)
On auctions machines with mileage of 30-40 thousand hours.
Length: 18.7m (including two adjustable roller tables - rollers with lengths of 5.6m and 5.1m respectively)
Width: 2.7m
Height: 4.7m
Weight: about 20 tons - weight not specified by the manufacturer in the DTR, weight given on the basis of data
of comparable machines.
Blasting chamber entrance width: 1250 mm
Height of the blasting chamber entrance: 500 mm
Number of turbines: 4 x 7.5KW model 4-EM-SR-1
Number of electric motors: 11 pcs.
Load capacity of a single roll of the automatic feeding table: 500 kg
Height to the top edge of the roller conveyor: 1110 mm
Material speed: 0.4 - 2.6 m/min (infinitely adjustable)
Total power: 50.2 KW / 50Hz / 160 A / 380V
Compressed air system pressure: 5-7 bar
Compressed air system demand: 30 m3/h
Machine documentation: original DTR book (with construction drawings and
electrical diagrams) and own materials (including photos ~ 1000 pcs)
Condition : Used machine purchased in 2007 from a container factory in bankruptcy and sent for a general
overhaul - currently in its last stage. Machine out of service since 2005. The machine repaired
on original parts. Included with the machine (in addition to new and already built components such as
turbine components) are new filters for the air cleaning station (12 pcs.), soundproofing materials for the
side inspection booths, manganese steel sheets (650kg) for lining the blasting chamber. Value
materials accumulated for incorporation - tens of thousands of zlotys.
The device can be viewed by appointment in Czernichów, ul, Przemysłowa 6 (12 km behind the
Krakow in the direction of Auschwitz). Possibility to run individually turbines and other components.
Contact information:
Machine in the process of renovation as in the photos - Requires completion of work by the buyer. Condition of the machine to see on site.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| ------------------- | |
| Length x width x height | 18700.0 × 2700.0 × 4700.0 |
| Weight | 2000 kg |
| worked hours | 2600 hours |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | being refitted |
| Last availability date | 04/08/2025 |
The Schlick RB 1250 is a large industrial machine manufactured in 1987, designed primarily for blasting operations. It measures 18.7 meters in length, 2.7 meters in width, and 4.7 meters in height, with a total weight of approximately 2,000 kg. The length includes two adjustable roller tables with roller lengths of 5.6 meters and 5.1 meters respectively. The blasting chamber features an entrance width of 1250 mm and a height of 500 mm, suitable for handling sizable materials.
Powering the machine are four turbines, each rated at 7.5 kW (model 4-EM-SR-1), supported by a total of 11 electric motors. The machine operates on a total power supply of 50.2 kW at 380 V, 50 Hz, and 160 A. It includes a compressed air system requiring a pressure between 5 to 7 bar and a demand of 30 m³/h. The automatic feeding table can support a load capacity of up to 500 kg per roll, with material speed adjustable continuously between 0.4 and 2.6 meters per minute. The height to the top edge of the roller conveyor is 1110 mm.
This machine was purchased used in 2007 from a container factory and has been undergoing a general overhaul since. It has been out of service since 2005 and is currently in the final stages of renovation, requiring completion by the buyer. The overhaul includes repairs with original parts, new turbine components, new air cleaning filters (12 pieces), soundproofing materials for side inspection booths, and 650 kg of manganese steel sheets for lining the blasting chamber. The original documentation, including the DTR book with construction drawings and electrical diagrams, is available along with extensive photographic material.
Visually, the machine is painted blue with open grey metal doors at the front revealing yellow motors or gearboxes inside. A metal railing is installed on top for safety and maintenance access. The machine appears structurally intact but shows some surface wear and minor rust on the doors. It is situated indoors on a concrete floor among other equipment.
The machine can be viewed by appointment in Czernichów, approximately 12 km from Krakow towards Auschwitz. Individual turbines and other components can be operated for inspection purposes on site. Interested buyers should note that the machine is sold as-is and requires finishing the renovation work.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 1 |
| Last activity | April 2, 2025 |
Камерна машина Schlick RB 1250
Komorový stroj Schlick RB 1250
Schlick RB 1250 kammermaskine
Schlick RB 1250 Kammermaschine
Μηχανή θαλάμου Schlick RB 1250
Schlick RB 1250 Chamber blasting machine
Máquina de campana Schlick RB 1250
Machine à chambre Schlick RB 1250
Schlick RB 1250 Komorna sačmarica
Schlick RB 1250 kamrás gép
Macchina a camera Schlick RB 1250
"Schlick RB 1250" kamerinė mašina
Schlick RB 1250 kamermachine
Schlick RB 1250 komorowa śrutownica
Máquina de câmara Schlick RB 1250
Aparat de cameră Schlick RB 1250
Камерная машина Schlick RB 1250
Schlick RB 1250 Chamber shot blaster
Schlick RB 1250 kammarmaskin
Schlick RB 1250 hazne makinesi
EN
- Languages
English (GB)