Description
Line Composed of:
1) SARONG SG6 / R ALVEOLOS DOSING SYSTEM
Machine for the dosing and filling of containers for suppositories starting from the alveoli in continuous tape.
- The machine uses rolls of approximately 1,000 alveoli.
- It has a production of up to 7000 suppositories.
- Stainless steel 6-needle dosing pump.
- Stainless steel product container with water circulation to maintain
the temperature to bath-maria. Capacity 30 L.
- High precision temperature regulation.
- The mixer has three speeds.
- 0.5 HP motor power. Voltage 220/380 III.
- Approximate measurements: 2,000 x 700 mm x 1,600 high.
- Approximate weight: 220 Kg.
2) FUSOR BOILER
- Stainless steel reactor, heated by electrical resistance of 220 V, 750 W, with
safety thermostat.
- Capacity 30 L. (Internal Ø = 350 mm, Height = 350 mm)
- Total height based on current column: 900 mm
- Agitation type turbine with 4 blades + lower marine propeller
- Motor power - reducer 0.18 Kw. Voltage 220/380 III.
- Temperature regulation by pt100 probe
3) SARONG SG6 / S MACHINE
For the closed and coding of the alveoli filled by the SG6 / R machine.
Machine for welding the preformed alveolus mouth after dosing.
- The machine uses the rolls coming from SG6 / R.
- It has a production of up to 7,000 suppositories.
- You can make strips of 3-4-5-6 and more suppositories with a simple regulator.
- Each strip of suppositories can be coded.
- The welding temperature can be regulated by means of a temperature regulator
high accuracy.
- Motor power: 0.5 HP. Voltage 220/380 III.
- Welding resistors: 700 Watt. 220V
- Approximate measurements: 1,800 x 700 mm. x 700 mm High.
- Approximate weight: 180 Kg.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase