In very good technical condition, the SAFAN Lochem Holland hydraulic press brake rb. 1990/2012, type DNCS 110-3100.
Press rebuilt by the manufacturer in 2012.
CNC-controlled synchronous machine DNCS ARA- controlled axes- Y1; Y2; R; Crow - Wila table deflection compensation controlled by CNC.
In addition, a hydraulic matrix for sheet metal folding-flattening, type DT005, controlled by CNC.
The machine is equipped with an automatic sheet support system during bending and flattening at 2 heights.
Hydraulic punch clamping. 4 bumper fingers with precision.
Pressure 110 t x working length 3100.
Between the sides 2600 mm. Machine weight 8.3 t. Drives 7.5 kW.
Protection of the working area with infrared.
A set of Amada / Trumpf system tools for the entire length of the machine, die V = 8 mm / angle 28 degrees and punch 28 degrees / h = 105 mm. This enables the 6 mm long window sill to be folded and flattened.
Full DTR documentation. Safety instructions in Polish.
The machine meets the requirements of the EU Machinery Directive (CE).

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Strength 110 T
Folding length 3100 mm
Distance between uprights 2600 mm
CNC DNCS ARA
Axis number 3
Motor power 7.5 kW
Hole No
-------------------
Weight 8300 kg
Worked hours
Hours under power
State good
At local norms yes
Status
Client type Reseller
Active since 2012
Offers online 86
Last activity March 28, 2024

Description

In very good technical condition, the SAFAN Lochem Holland hydraulic press brake rb. 1990/2012, type DNCS 110-3100.
Press rebuilt by the manufacturer in 2012.
CNC-controlled synchronous machine DNCS ARA- controlled axes- Y1; Y2; R; Crow - Wila table deflection compensation controlled by CNC.
In addition, a hydraulic matrix for sheet metal folding-flattening, type DT005, controlled by CNC.
The machine is equipped with an automatic sheet support system during bending and flattening at 2 heights.
Hydraulic punch clamping. 4 bumper fingers with precision.
Pressure 110 t x working length 3100.
Between the sides 2600 mm. Machine weight 8.3 t. Drives 7.5 kW.
Protection of the working area with infrared.
A set of Amada / Trumpf system tools for the entire length of the machine, die V = 8 mm / angle 28 degrees and punch 28 degrees / h = 105 mm. This enables the 6 mm long window sill to be folded and flattened.
Full DTR documentation. Safety instructions in Polish.
The machine meets the requirements of the EU Machinery Directive (CE).

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Strength 110 T
Folding length 3100 mm
Distance between uprights 2600 mm
CNC DNCS ARA
Axis number 3
Motor power 7.5 kW
Hole No
-------------------
Weight 8300 kg
Worked hours
Hours under power
State good
At local norms yes
Status

About this seller

Client type Reseller
Active since 2012
Offers online 86
Last activity March 28, 2024

Here is a selection of similar machines

Safan DNCS 110-3100 Press brake cnc/nc