Price on request
Make an offer| Cutting length | 4300 mm |
| Max. thickness | 8 mm |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | yes |
| status | visible |
| Last availability date | 17/01/2026 |
This Safan HVS 430 8 hydraulic guillotine shear, manufactured in 1985, offers a cutting capacity of 4300 mm length by 8 mm thickness. The machine features a large metal cutting table equipped with grooves and slots designed for precise material positioning, along with a side support table on the left side that includes a vertical support leg for added stability during operation. An adjustable cutting angle enhances versatility for different cutting requirements.
The shear is equipped with a back gauge to assist in accurate cutting length settings. A mechanical dial gauge with a needle indicator is mounted on the side of the machine to provide visual feedback for adjustments. The control panel includes multiple knobs, switches, and buttons, along with schematic diagrams and markings to facilitate operation. A prominent red emergency stop button is located on the left side near the control panel to ensure operator safety.
For protection, an orange safety guard/grill is installed along the cutting blade area. The machine is currently suspended by two orange lifting straps attached to the top frame, indicating it is prepared for transport or installation. Electrical components such as a motor or actuator with connected wiring and a position sensor or switch are visible, though these areas show accumulation of dust and dirt consistent with used industrial equipment.
Overall, the machine shows signs of wear including scratches and dirt on the surface, control panel, cutting table, and support structures, reflecting its industrial usage history. This hydraulic guillotine shear is suitable for heavy-duty cutting tasks where precision and durability are required.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Capacity: 4300 x 8mm
Renewed Delem Touch control and servo motor + drive for the backgauge
Adjustable cutting angle
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 174 |
| Last activity | March 5, 2026 |
Capacity: 4300 x 8mm
Renewed Delem Touch control and servo motor + drive for the backgauge
Adjustable cutting angle
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Cutting length | 4300 mm |
| Max. thickness | 8 mm |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | yes |
| status | visible |
| Last availability date | 17/01/2026 |
This Safan HVS 430 8 hydraulic guillotine shear, manufactured in 1985, offers a cutting capacity of 4300 mm length by 8 mm thickness. The machine features a large metal cutting table equipped with grooves and slots designed for precise material positioning, along with a side support table on the left side that includes a vertical support leg for added stability during operation. An adjustable cutting angle enhances versatility for different cutting requirements.
The shear is equipped with a back gauge to assist in accurate cutting length settings. A mechanical dial gauge with a needle indicator is mounted on the side of the machine to provide visual feedback for adjustments. The control panel includes multiple knobs, switches, and buttons, along with schematic diagrams and markings to facilitate operation. A prominent red emergency stop button is located on the left side near the control panel to ensure operator safety.
For protection, an orange safety guard/grill is installed along the cutting blade area. The machine is currently suspended by two orange lifting straps attached to the top frame, indicating it is prepared for transport or installation. Electrical components such as a motor or actuator with connected wiring and a position sensor or switch are visible, though these areas show accumulation of dust and dirt consistent with used industrial equipment.
Overall, the machine shows signs of wear including scratches and dirt on the surface, control panel, cutting table, and support structures, reflecting its industrial usage history. This hydraulic guillotine shear is suitable for heavy-duty cutting tasks where precision and durability are required.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 174 |
| Last activity | March 5, 2026 |
Safan HVS 430 8
Hydraulické nůžky / gilotiny Safan HVS 430 8
Safan HVS 430 8
Safan HVS 430 8 Hydraulische Blechschere
Safan HVS 430 8
Safan HVS 430 8 hydraulic shear
Cizalla guillotina hidráulica Safan HVS 430 8
Cisaille guillotine hydraulique Safan HVS 430 8
Safan HVS 430 8
Safan HVS 430 8
Cesoia ghigliottina idraulica Safan HVS 430 8
Safan HVS 430 8
Safan HVS 430 8
Nożyce gilotynowe hydrauliczne Safan HVS 430 8
Safan HVS 430 8
Safan HVS 430 8
Safan HVS 430 8 Гидравлические гильотинные ножницы
Safan HVS 430 8
Safan HVS 430 8
Hidrolik giyotin makas Safan HVS 430 8
EN
- Languages
English (GB)