Price on request
Make an offer| Power in tons | 1640 T |
| Table length | 2650 mm |
| Table width | 2650 mm |
| Ram stroke | 1700 mm |
| Distance between columns | 1620 mm |
| ------------------- | |
| Length x width x height | 15220.0 × 8620.0 × 7730.0 |
| Weight | 280000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 02/04/2026 |
Item: Sheet Metal Double Action Hydraulic Press - Model P233A
Manufacturer: Russian
Year of Manufacture: 1985
This large industrial hydraulic press is designed for hot and cold stamping of sheet metal, particularly suitable for producing bottoms for vessels, reservoirs, and oilers. The machine features a total nominal force capacity of 1640 tons, distributed across multiple rams with varying force steps: the drawing ram offers three force steps of 280, 560, and 800 tons, while the clamping ram provides two steps of 250 and 500 tons. Additionally, the press includes lift cylinders with a nominal force of 200 tons.
Key technical specifications include a ram stroke of 1700 mm for both drawing and clamping rams, a maximum clearance between the table and drawing ram of 260 mm, and a table size of 2650 by 2650 mm. The distance between columns is 1620 mm, with a clear aperture between stroke limiters measuring 1620 by 2920 mm. The table travel is 2650 mm, supported by a nominal force of 50 tons, and the hydraulic cushion (central knockout) has a nominal force of 250 tons with a travel of 700 mm. The maximum permissible load on one guide pin is 20 tons.
The press operates at a nominal pressure of 20 MPa, powered by a main pump motor of 132 kW and a total electric motor power of approximately 299.5 kW. It achieves various ram velocities, including 200 mm/s at double action additional stroke and 32 mm/s during the working stroke for the drawing ram. Table movement velocity is 264 mm/s, with the hydraulic cushion and side ejector having upward and downward velocities ranging from 95 to 275 mm/s.
Overall dimensions of the machine are substantial, measuring 15,220 mm in length, 8,620 mm in width, and 7,730 mm in height, with a mass of 280,000 kg.
The press is equipped with multiple vertical hydraulic cylinders and a yellow control or hydraulic box located at the base front center. It has metal stairs and a platform with railings on the top, facilitating access to upper machine sections. Visible hydraulic pipes, valves, and fittings are present on the top section. The machine shows signs of rust, paint chipping, and surface wear consistent with heavy industrial use. It is situated in a workshop environment with scattered metal parts and debris nearby, indicating active or previous operation in an industrial setting.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Item: Sheet Metal Double Action Press - Dish End Applications
Manufacturer: Russian
Model: P233A
Year of Manufacture: 1985
Condition: Good Condition
Technical Specifications:
- Total Nominal Force: 1640 tons
- Drawing Ram:
- 1st Step: 280 tons
- 2nd Step: 560 tons
- 3rd Step: 800 tons
- Clamping Ram:
- 1st Step: 250 tons
- 2nd Step: 500 tons
- Nominal Force of Lift Cylinders: 200 tons
- Ram Travel:
- Drawing Ram: 1700 mm
- Clamping Ram: 1700 mm
- Max Clearance Between Table and Drawing Ram: 260 mm
- Table Dimensions: 2650 x 2650 mm
- Clear Aperture Between Stroke Limiters: 1620 x 2920 mm
- Nominal Force of Table Travel: 50 tons
- Table Travel: 2650 mm
- Nominal Force of Hydraulic Cushion (Central Knockout): 250 tons
- Hydraulic Cushion Travel Over Table: 700 mm
- Permissible Load on One Guide Pin Max: 20 tons
Velocity Specifications:
- Rams Velocity:
- At Double Action Additional Stroke: 200 mm/s
- Working Stroke (for Drawing Ram Only): 32 mm/s
- Back Stroke: 135 mm/s
- At Single Acting Additional Stroke: 200 mm/s
- Working Stroke: 10 mm/s
- Back Stroke: 135 mm/s
- Velocity of Table Move: 264 mm/s
- Velocity of Hydraulic Cushion Movement:
- Upward: 95 mm/s
- Downward: 200 mm/s
- Velocity of Side Ejector:
- Upwards: 264 mm/s
- Downwards: 275 mm/s
Pressure and Power:
- Nominal Pressure: 20 MPA
- Main Pump Motor Power: 132 kW
- Total Efficiency of Main Pumps: 880 l/min
- Calculated Total Power of All Electric Motors: 299.5 kW
Overall Dimensions:
- Length: 15220 mm
- Width: 8620 mm
- Height: 7730 mm
- Mass: 280 tons
This machine is suitable for hot and cold stamping of sheets, specifically for making bottoms for vessels, reservoirs, and oilers.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 20, 2026 |
Item: Sheet Metal Double Action Press - Dish End Applications
Manufacturer: Russian
Model: P233A
Year of Manufacture: 1985
Condition: Good Condition
Technical Specifications:
- Total Nominal Force: 1640 tons
- Drawing Ram:
- 1st Step: 280 tons
- 2nd Step: 560 tons
- 3rd Step: 800 tons
- Clamping Ram:
- 1st Step: 250 tons
- 2nd Step: 500 tons
- Nominal Force of Lift Cylinders: 200 tons
- Ram Travel:
- Drawing Ram: 1700 mm
- Clamping Ram: 1700 mm
- Max Clearance Between Table and Drawing Ram: 260 mm
- Table Dimensions: 2650 x 2650 mm
- Clear Aperture Between Stroke Limiters: 1620 x 2920 mm
- Nominal Force of Table Travel: 50 tons
- Table Travel: 2650 mm
- Nominal Force of Hydraulic Cushion (Central Knockout): 250 tons
- Hydraulic Cushion Travel Over Table: 700 mm
- Permissible Load on One Guide Pin Max: 20 tons
Velocity Specifications:
- Rams Velocity:
- At Double Action Additional Stroke: 200 mm/s
- Working Stroke (for Drawing Ram Only): 32 mm/s
- Back Stroke: 135 mm/s
- At Single Acting Additional Stroke: 200 mm/s
- Working Stroke: 10 mm/s
- Back Stroke: 135 mm/s
- Velocity of Table Move: 264 mm/s
- Velocity of Hydraulic Cushion Movement:
- Upward: 95 mm/s
- Downward: 200 mm/s
- Velocity of Side Ejector:
- Upwards: 264 mm/s
- Downwards: 275 mm/s
Pressure and Power:
- Nominal Pressure: 20 MPA
- Main Pump Motor Power: 132 kW
- Total Efficiency of Main Pumps: 880 l/min
- Calculated Total Power of All Electric Motors: 299.5 kW
Overall Dimensions:
- Length: 15220 mm
- Width: 8620 mm
- Height: 7730 mm
- Mass: 280 tons
This machine is suitable for hot and cold stamping of sheets, specifically for making bottoms for vessels, reservoirs, and oilers.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Power in tons | 1640 T |
| Table length | 2650 mm |
| Table width | 2650 mm |
| Ram stroke | 1700 mm |
| Distance between columns | 1620 mm |
| ------------------- | |
| Length x width x height | 15220.0 × 8620.0 × 7730.0 |
| Weight | 280000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 02/04/2026 |
Item: Sheet Metal Double Action Hydraulic Press - Model P233A
Manufacturer: Russian
Year of Manufacture: 1985
This large industrial hydraulic press is designed for hot and cold stamping of sheet metal, particularly suitable for producing bottoms for vessels, reservoirs, and oilers. The machine features a total nominal force capacity of 1640 tons, distributed across multiple rams with varying force steps: the drawing ram offers three force steps of 280, 560, and 800 tons, while the clamping ram provides two steps of 250 and 500 tons. Additionally, the press includes lift cylinders with a nominal force of 200 tons.
Key technical specifications include a ram stroke of 1700 mm for both drawing and clamping rams, a maximum clearance between the table and drawing ram of 260 mm, and a table size of 2650 by 2650 mm. The distance between columns is 1620 mm, with a clear aperture between stroke limiters measuring 1620 by 2920 mm. The table travel is 2650 mm, supported by a nominal force of 50 tons, and the hydraulic cushion (central knockout) has a nominal force of 250 tons with a travel of 700 mm. The maximum permissible load on one guide pin is 20 tons.
The press operates at a nominal pressure of 20 MPa, powered by a main pump motor of 132 kW and a total electric motor power of approximately 299.5 kW. It achieves various ram velocities, including 200 mm/s at double action additional stroke and 32 mm/s during the working stroke for the drawing ram. Table movement velocity is 264 mm/s, with the hydraulic cushion and side ejector having upward and downward velocities ranging from 95 to 275 mm/s.
Overall dimensions of the machine are substantial, measuring 15,220 mm in length, 8,620 mm in width, and 7,730 mm in height, with a mass of 280,000 kg.
The press is equipped with multiple vertical hydraulic cylinders and a yellow control or hydraulic box located at the base front center. It has metal stairs and a platform with railings on the top, facilitating access to upper machine sections. Visible hydraulic pipes, valves, and fittings are present on the top section. The machine shows signs of rust, paint chipping, and surface wear consistent with heavy industrial use. It is situated in a workshop environment with scattered metal parts and debris nearby, indicating active or previous operation in an industrial setting.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 20, 2026 |
Хидравлична преса Russian P233A
Hydraulický lis Russian P233A
Russian P233A Hydraulisk presse
Russian P233A Hydraulische Presse
Υδραυλική πρέσα Russian P233A
Russian P233A Hydraulic press
Prensa hidráulica Russian P233A
Presse hydraulique Russian P233A
Hidraulična preša Russian P233A
Russian P233A Hidraulikus prés
Pressa idraulica Russian P233A
Russian P233A Hidraulinis presas
Russian P233A Hydraulische pers
Prasa hydrauliczna Russian P233A
Prensa hidráulica Russian P233A
Presă hidraulică Russian P233A
Russian P233A Гидравлический пресс
Hidraulična presa Russian P233A
Russian P233A Hydraulpress
Hidrolik pres Russian P233A
EN
- Languages
English (GB)