Price on request
Make an offer| Capacity | T |
| Ram stroke | 1300 mm |
| Type | |
| Nbr of strokes/min | |
| Engine Power | kW |
| ------------------- | |
| Length x width x height | 3700.0 × 2000.0 × 6470.0 |
| Weight | kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 02/04/2026 |
This listing is for a Russian-manufactured forging hammer, model M2147, produced in 1989. The hammer has a forging capacity of 5 tons and delivers an impact energy of 125 kJ. It features a ram stroke length of 1300 mm and operates at a rate of 50 blows per minute. The distance between the guides is 800 mm, with the ram's front-to-back dimension measuring 950 mm and the die holder's front-to-back dimension at 1180 mm. The distance from the bottom die impression to the floor is 700 mm, while the minimum distance between the die holder and the ram is 400 mm. It operates with a steam or air pressure ranging from 0.7 to 0.9 MPa.
The overall dimensions of the hammer are 3700 mm in length, 2000 mm in width, and 6470 mm in height. The hammer's mass, excluding the anvil block, is approximately 40 tons, with the anvil block weighing around 99 tons, totaling a combined weight of about 140 tons.
The hammer features a prominent vertical structure with a piston-like component centrally located, likely part of its operational mechanism. A hydraulic or pneumatic cylinder is mounted on the left side of the hammer, with visible pipes and hydraulic lines attached to the frame, indicating its power and control systems. The base platform includes segmented metal grates, and the lower section shows visible springs, which are probably part of the hammer's shock absorption system.
The hammer's surface shows signs of wear, dirt accumulation, and some rust, consistent with use in an industrial environment. Despite this, the structural components appear intact with no visible damage to critical parts such as the springs or frame. The base also shows dirt and dust but no structural issues.
This forging hammer is suitable for heavy-duty industrial forging applications where high impact energy and substantial capacity are required.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Forging Equipment
Capacity : 5 tons,
Impact energy : 125 kj,
Ram stroke : 1300 mm,
No. of blows : 50 per min.,
Distance clear between guides : 800 mm,
Ram front to back dimensions : 950 mm,
Die holder front to back dimensions :1180 mm,
Bottom die impression to floor distance : 700 mm,
Minimum die holder to ram distance : 400 mm,
Steam (air) pressure : 0.7-0.9 MPa,
Overall dimensions : 3700 x 2000 x 6470 mm,
Mass (less anvil block) approx. : 40 tons,
Mass of anvil block approx. : 99 tons,
Total weight : 140 tons.
Item Condition: Good condition
Capacity Tons: 5
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 13, 2026 |
Forging Equipment
Capacity : 5 tons,
Impact energy : 125 kj,
Ram stroke : 1300 mm,
No. of blows : 50 per min.,
Distance clear between guides : 800 mm,
Ram front to back dimensions : 950 mm,
Die holder front to back dimensions :1180 mm,
Bottom die impression to floor distance : 700 mm,
Minimum die holder to ram distance : 400 mm,
Steam (air) pressure : 0.7-0.9 MPa,
Overall dimensions : 3700 x 2000 x 6470 mm,
Mass (less anvil block) approx. : 40 tons,
Mass of anvil block approx. : 99 tons,
Total weight : 140 tons.
Item Condition: Good condition
Capacity Tons: 5
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Capacity | T |
| Ram stroke | 1300 mm |
| Type | |
| Nbr of strokes/min | |
| Engine Power | kW |
| ------------------- | |
| Length x width x height | 3700.0 × 2000.0 × 6470.0 |
| Weight | kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 02/04/2026 |
This listing is for a Russian-manufactured forging hammer, model M2147, produced in 1989. The hammer has a forging capacity of 5 tons and delivers an impact energy of 125 kJ. It features a ram stroke length of 1300 mm and operates at a rate of 50 blows per minute. The distance between the guides is 800 mm, with the ram's front-to-back dimension measuring 950 mm and the die holder's front-to-back dimension at 1180 mm. The distance from the bottom die impression to the floor is 700 mm, while the minimum distance between the die holder and the ram is 400 mm. It operates with a steam or air pressure ranging from 0.7 to 0.9 MPa.
The overall dimensions of the hammer are 3700 mm in length, 2000 mm in width, and 6470 mm in height. The hammer's mass, excluding the anvil block, is approximately 40 tons, with the anvil block weighing around 99 tons, totaling a combined weight of about 140 tons.
The hammer features a prominent vertical structure with a piston-like component centrally located, likely part of its operational mechanism. A hydraulic or pneumatic cylinder is mounted on the left side of the hammer, with visible pipes and hydraulic lines attached to the frame, indicating its power and control systems. The base platform includes segmented metal grates, and the lower section shows visible springs, which are probably part of the hammer's shock absorption system.
The hammer's surface shows signs of wear, dirt accumulation, and some rust, consistent with use in an industrial environment. Despite this, the structural components appear intact with no visible damage to critical parts such as the springs or frame. The base also shows dirt and dust but no structural issues.
This forging hammer is suitable for heavy-duty industrial forging applications where high impact energy and substantial capacity are required.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 13, 2026 |
Ковашки чук Russian M2147
Kovací buchar Russian M2147
Russian M2147 Smedehammer
Russian M2147 Schmiedehammer
Σφυρί σφυρηλάτησης Russian M2147
Russian M2147 Forging hammer
Martillo pilón Russian M2147
Marteau-pilon Russian M2147
Kovački čekić Russian M2147
Russian M2147 Kovácskalapács
Maglio Russian M2147
Russian M2147 Kalimo kūjis
Russian M2147 Smeedhamer
Młot kuźniczy Russian M2147
Martelo de forja Russian M2147
Ciocan de forjare Russian M2147
Russian M2147 Кузнечный молот
Kovački čekić Russian M2147
Russian M2147 Smideshammare
Dövme şahmerdanı Russian M2147
EN
- Languages
English (GB)