Rommelag Type 305M BFS
Machine is located in Brazil
Machine Type: 305M
Moulds will be supplied with the machine, without any product coding.
Complete with machine conveyors Stougaard-Argos PGT 34 Polyloader.
Equiptec ES100 Dryer.
Hydraulik 132013-051-0010 Hydraulic Pack
Vacuum Pump Assembly.
Operational and Maintenance documentation
The machine was fully operational prior to removal.
Was last used to fill sterile pharmaceutical product into unit dose vials → Currently set up for 2 & 4ml
Unit Dose Vials at 11000 UDV’s per hour.
Steam In Place qualification and media runs were performed annually.
The equipment was calibrated by BIL at routine intervals.
Weight: approx. 7000kgs
Dimensions Length: approx. 3150m Width: approx. 2825mm Height: approx. 2800mm
Noise: 77 dB(A)
Enclosure type: IP54
Supply Voltage: 3 x 400 V+N, PE
Frequency: 50 HZ
Current: 120 A
Control Voltage: 24 V DC
Main Fuse: 125 A
Rated Power Consumption: 80 kVA
Pneumatic: Air Pressure: 8 bar
Max. Consumption: 350 l/min
Hydraulic: Pressure: max. 160 bar
Hydraulic motor: 11 kW
Miscellaneous Machine Data:
Extruder: Ø 45 mm (9 D)
Extruder motor: 32kW
Plastic granulate used: LDPE
Plasticizing capacity for plastic granulate: 65 kg/h
Steam: 2.5 bar; purity <1 μm
Consumption for preparation: 40 kg/h
Consumption for production: 15 kg/h
Cooling water: 12 ºC, 4 bar; <55 μm / 12ºdH
Consumption: 2 m3/h
Temperature (machine): Storage temperature: 15-30 ºC
Operating temperature: 15-30 ºC
Air moisture: 40-80%
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase