Roders RXP600 DSH Precision High Speed ​​CNC Milling Center

Machining range for horizontal table position: X 500 mm, Y 855 mm, Z 400 mm

Distance from spindle nose to table: 515 mm

Tool magazine: 28 positions

Overall dimensions in transport position: W 2300 × D 2800 × H 2920 mm.

Total weight: 10200kg.

Spindle
Model: FISCHER HSC 40 - high-frequency milling, vector-controlled spindle, FISCHER (Germany)

Power: 14 kW, 3000-42.000 rpm

Tool holder HSK 40:

Maximum tool diameter: 16 mm.

Desktop
Swivel rotary table with thrust bearings for highest rigidity and accuracy, integrated in the X-axis.

A-axis tilt range: +/- 115 degrees.

C-axis tilt range: +/- 360 deg.

Workpiece weight: 200 kg.

T-slot table size 340 × 340mm (ø400)

Groove width: 12mm.

Distance between grooves: 45 mm.

Linear motors: all axes

Cooling of the main and secondary parts for the purpose of temperature stabilization of the machine

Compensation for uneven feed force in the CNC

Swivel axle drives
Drives: Direct with high dynamics and precision.

Feed rate: 0 - 40,000 mm / min in all linear axes

Acceleration on all axes: 2G

Work zone
Isolation: completely closed - two doors equipped with protective screens, a good view of the working area; convenient loading of workpieces using a crane.

Sealing machine units: all machine units are protected from contamination; with the use of an industrial vacuum cleaner, it is possible to process cast iron, plastic and graphite.

Control
Control type: ROEDERS HSC numerical control RMS6, 17 "LCD monitor

Reading time of the 1st frame: less than 0.1ms

Uninterruptible Power Supply: Built-in

Tool geometry measurement: laser measuring system

Optical ruler: 3-axis

Automatic 3D measuring probe: information transfer via IR interface, several measuring cycles are available via CNC.

Collision detection function.

Handwheel for manual control of the machine

Airborne lubrication
Refrigerant and lubricant supply with 2 2-piece nozzles, no waste disposal required

Workpiece cleaning: A compressed air jet for workpiece cleaning is integrated in the Z-axis.

Tool cleaning device: A nozzle designed to clean the tool before measuring with a jet of compressed air.

Manual cleaning of the working area: a pump connected to the standard exhaust port on the back of the machine.

Cooling system for motors and machine tool spindle

Required air quantity according to ISO8573.1 (class 4):

solid contaminants: max. size 15μm, max. particle density 8 mg / m³
total oil content: max. oil concentration 5 mg / m³
maximum dew point pressure: + 3ºС.

Connections

Electric: 380V +/- 63A;

Pneumatics: 6.5 bar, consumption max. 600l / min

Additionally
In the event of a power failure, the Z axis of the machine will be lifted to prevent breakage of the workpiece and tool

Oil mist removal system (mechanical)

Chip conveyor for coolant and chip removal

Transformer 380V

External coolant supply system includes:

external coolant pump;
coolant filtration system with a 600 l tank;
heat exchanger for coolant temperature stabilization;
nozzles for supplying coolant to the working area;
gun for washing off shavings.

Repairs carried out

in 2014 the hydroelectric station was replaced
in 2015, the A-axis drive was replaced
in 2016, the Heidenhain optical ruler along the X axis was replaced with an identical

The physical state

Operating time less than 2000 hours
Spindle lubrication station in perfect condition
There is no wear on the guides
The machine is tested and ready to go

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Axis X 500 mm
Axis Y 855 mm
Axis Z 400 mm
Type Horizontal
CNC ROEDERS HSC
Max. part weight 200 kg
Number of tool pockets 28
Spindle taper HSK 40
Max. spindle speed 42000 rpm
Spindle motor power 14 kW
Rotary table no
-------------------
Length x width x height 2300.0 × 2800.0 × 2920.0
Weight 10200 kg
Worked hours 2000 hours
Hours under power
State good
At local norms ---------
Status
Client type User – large company
Active since 2018
Offers online 1
Last activity March 18, 2024

Description

Roders RXP600 DSH Precision High Speed ​​CNC Milling Center

Machining range for horizontal table position: X 500 mm, Y 855 mm, Z 400 mm

Distance from spindle nose to table: 515 mm

Tool magazine: 28 positions

Overall dimensions in transport position: W 2300 × D 2800 × H 2920 mm.

Total weight: 10200kg.

Spindle
Model: FISCHER HSC 40 - high-frequency milling, vector-controlled spindle, FISCHER (Germany)

Power: 14 kW, 3000-42.000 rpm

Tool holder HSK 40:

Maximum tool diameter: 16 mm.

Desktop
Swivel rotary table with thrust bearings for highest rigidity and accuracy, integrated in the X-axis.

A-axis tilt range: +/- 115 degrees.

C-axis tilt range: +/- 360 deg.

Workpiece weight: 200 kg.

T-slot table size 340 × 340mm (ø400)

Groove width: 12mm.

Distance between grooves: 45 mm.

Linear motors: all axes

Cooling of the main and secondary parts for the purpose of temperature stabilization of the machine

Compensation for uneven feed force in the CNC

Swivel axle drives
Drives: Direct with high dynamics and precision.

Feed rate: 0 - 40,000 mm / min in all linear axes

Acceleration on all axes: 2G

Work zone
Isolation: completely closed - two doors equipped with protective screens, a good view of the working area; convenient loading of workpieces using a crane.

Sealing machine units: all machine units are protected from contamination; with the use of an industrial vacuum cleaner, it is possible to process cast iron, plastic and graphite.

Control
Control type: ROEDERS HSC numerical control RMS6, 17 "LCD monitor

Reading time of the 1st frame: less than 0.1ms

Uninterruptible Power Supply: Built-in

Tool geometry measurement: laser measuring system

Optical ruler: 3-axis

Automatic 3D measuring probe: information transfer via IR interface, several measuring cycles are available via CNC.

Collision detection function.

Handwheel for manual control of the machine

Airborne lubrication
Refrigerant and lubricant supply with 2 2-piece nozzles, no waste disposal required

Workpiece cleaning: A compressed air jet for workpiece cleaning is integrated in the Z-axis.

Tool cleaning device: A nozzle designed to clean the tool before measuring with a jet of compressed air.

Manual cleaning of the working area: a pump connected to the standard exhaust port on the back of the machine.

Cooling system for motors and machine tool spindle

Required air quantity according to ISO8573.1 (class 4):

solid contaminants: max. size 15μm, max. particle density 8 mg / m³
total oil content: max. oil concentration 5 mg / m³
maximum dew point pressure: + 3ºС.

Connections

Electric: 380V +/- 63A;

Pneumatics: 6.5 bar, consumption max. 600l / min

Additionally
In the event of a power failure, the Z axis of the machine will be lifted to prevent breakage of the workpiece and tool

Oil mist removal system (mechanical)

Chip conveyor for coolant and chip removal

Transformer 380V

External coolant supply system includes:

external coolant pump;
coolant filtration system with a 600 l tank;
heat exchanger for coolant temperature stabilization;
nozzles for supplying coolant to the working area;
gun for washing off shavings.

Repairs carried out

in 2014 the hydroelectric station was replaced
in 2015, the A-axis drive was replaced
in 2016, the Heidenhain optical ruler along the X axis was replaced with an identical

The physical state

Operating time less than 2000 hours
Spindle lubrication station in perfect condition
There is no wear on the guides
The machine is tested and ready to go

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Axis X 500 mm
Axis Y 855 mm
Axis Z 400 mm
Type Horizontal
CNC ROEDERS HSC
Max. part weight 200 kg
Number of tool pockets 28
Spindle taper HSK 40
Max. spindle speed 42000 rpm
Spindle motor power 14 kW
Rotary table no
-------------------
Length x width x height 2300.0 × 2800.0 × 2920.0
Weight 10200 kg
Worked hours 2000 hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type User – large company
Active since 2018
Offers online 1
Last activity March 18, 2024

Here is a selection of similar machines

Roders RXP600 DSH high speed machining center