Price on request
Make an offer| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 05/11/2025 |
This mechanical press is a Reis model TUS 80 OK-50, manufactured in 1996. It offers a nominal force of 50.98 US tons and a maximum retraction force of 25.49 US tons. The press features a daylight opening of 45.26 inches and a total stroke length of 43.3 inches, providing ample space for various pressing operations. The table surface area measures 43.30 inches left to right by 31.49 inches front to back, which is the same size as the ram surface area, allowing for consistent and precise workpiece handling. The distance between the columns is 33.46 inches front to back. The maximum capacity of the swivel ram plate is 2.54 tons, and the maximum die weight on the table is 5.09 tons. The press operates with an oil volume of 52.8 gallons.
Key features include a swing-down ram that rotates 180 degrees, a slide-out bolster for easier die changes, a mechanical ram-locking device, an injection unit, and positioning control with a digital measuring device. The machine has recorded 1,059 operational hours.
From the images, the press is painted in a gray and yellow color scheme and is equipped with a flat worktable featuring T-slots for mounting workpieces securely. The vertical press ram is supported by two large guide columns, and a control panel with various buttons and switches is located on the right side of the machine for operation control. A yellow safety guard surrounds the press ram area, enhancing operator safety. Additionally, there is a cooling or ventilation unit mounted on the left side of the machine. The machine shows visible signs of wear and dirt on the floor and base, consistent with use in an industrial environment.
This Reis TUS 80 OK-50 mechanical press is suitable for heavy-duty pressing tasks and offers a range of features to facilitate precise and safe operation in an industrial setting.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Manufactured 1996
Features
Model TUS 80 OK-50
- Nominal force: 50.98 US Ton
- Max. retraction force: 25.49 US Ton
- Daylight opening: 41.33" + 3.93" - Total 45.26"
- Stroke: 39.37" + 3.93" - Total 43.3"
- Table surface area: 43.30" LR x 31.49" FB
- Ram surface area: 43.30"LR x 31.49" FB
- Distance between columns: 33.46" FB
- Max. capacity of swivel ram plate: 2.54 ton
- Die weight on table: 5.09 ton Max.
- Oil volume: 52.8 gallon
EQUIPPED WITH:
- Swing down ram - 180 degrees
- Slide out bolster
- Mechanical ram-locking device
- Injection unit
- Positioning control with digital measuring
device
HOURS: 1,059
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 195 |
| Last activity | April 16, 2026 |
Manufactured 1996
Features
Model TUS 80 OK-50
- Nominal force: 50.98 US Ton
- Max. retraction force: 25.49 US Ton
- Daylight opening: 41.33" + 3.93" - Total 45.26"
- Stroke: 39.37" + 3.93" - Total 43.3"
- Table surface area: 43.30" LR x 31.49" FB
- Ram surface area: 43.30"LR x 31.49" FB
- Distance between columns: 33.46" FB
- Max. capacity of swivel ram plate: 2.54 ton
- Die weight on table: 5.09 ton Max.
- Oil volume: 52.8 gallon
EQUIPPED WITH:
- Swing down ram - 180 degrees
- Slide out bolster
- Mechanical ram-locking device
- Injection unit
- Positioning control with digital measuring
device
HOURS: 1,059
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 05/11/2025 |
This mechanical press is a Reis model TUS 80 OK-50, manufactured in 1996. It offers a nominal force of 50.98 US tons and a maximum retraction force of 25.49 US tons. The press features a daylight opening of 45.26 inches and a total stroke length of 43.3 inches, providing ample space for various pressing operations. The table surface area measures 43.30 inches left to right by 31.49 inches front to back, which is the same size as the ram surface area, allowing for consistent and precise workpiece handling. The distance between the columns is 33.46 inches front to back. The maximum capacity of the swivel ram plate is 2.54 tons, and the maximum die weight on the table is 5.09 tons. The press operates with an oil volume of 52.8 gallons.
Key features include a swing-down ram that rotates 180 degrees, a slide-out bolster for easier die changes, a mechanical ram-locking device, an injection unit, and positioning control with a digital measuring device. The machine has recorded 1,059 operational hours.
From the images, the press is painted in a gray and yellow color scheme and is equipped with a flat worktable featuring T-slots for mounting workpieces securely. The vertical press ram is supported by two large guide columns, and a control panel with various buttons and switches is located on the right side of the machine for operation control. A yellow safety guard surrounds the press ram area, enhancing operator safety. Additionally, there is a cooling or ventilation unit mounted on the left side of the machine. The machine shows visible signs of wear and dirt on the floor and base, consistent with use in an industrial environment.
This Reis TUS 80 OK-50 mechanical press is suitable for heavy-duty pressing tasks and offers a range of features to facilitate precise and safe operation in an industrial setting.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 195 |
| Last activity | April 16, 2026 |
Механична преса Reis TUS 80 OK-50
Mechanický lis Reis TUS 80 OK-50
Reis TUS 80 OK-50 Mekanisk presse
Reis TUS 80 OK-50 Mechanische Presse
Μηχανική πρέσα Reis TUS 80 OK-50
Used 50 Ton Reis Mold Spotting & Tryout Press
Prensa mecánica Reis TUS 80 OK-50
Presse mécanique Reis TUS 80 OK-50
Mehanička preša Reis TUS 80 OK-50
Reis TUS 80 OK-50 Mechanikus prés
Pressa meccanica Reis TUS 80 OK-50
Mechaninis presas Reis TUS 80 OK-50
Reis TUS 80 OK-50 Mechanische pers
Prasa mechaniczna Reis TUS 80 OK-50
Prensa mecânica Reis TUS 80 OK-50
Presă mecanică Reis TUS 80 OK-50
Reis TUS 80 OK-50 Механические прессы
Mehanička presa Reis TUS 80 OK-50
Reis TUS 80 OK-50 Mekanisk press
Mekanik presler Reis TUS 80 OK-50
EN
- Languages
English (GB)