1 door cell for the production of room doors
Manufacturer: REICHENBACHER / KUKA
Type: Vision
year 2010 (commissioning 2011)

The machine is designed for:
-forming/rebating/floor groove/sealing groove
-lock processing with multiple locking/card lock/etc.
-tape processing, tape drilling, flap tape, tectus, tape side locking etc
-Floor groove
-Routing for door closer/opener/edge bolt
-Ornamental milling on both sides (in connection with door turning place and robot)
-light cut-outs/ventilation cut-outs/peephole etc

Travels:
X 7,880 mm
Y 2,200 mm
Z 380 mm

Traversing speeds: approx.
X 60 m/min
Y 90 m/min
Z 20 m/min

Number of 5-axis milling spindles 2
Speed 500 - 24,000 rpm
Rated power 15 kw S1 from approx. 12,000 rpm
Vibration monitoring system
Tool holder HSK 63 F
Tool length max. 240 mm
Tool diameter max. 200 mm (for sawing units 300 mm)
Tool weight max. 6 kg

Tool changer travelling in X
Handling system Double gripper
Number of tool positions 40
Tool centre distance 80 mm
Max. tool weight Total tool weight 160 kg

Table design
PIN table with adjustable crossbar at the back
Vacuum cups, individually controllable
Number 144
Diameter of vacuum cups 50 mm
2 work areas for alternate loading
with 2 units and quick change max. 2,200 x 1,500 mm
with 1 unit 3,000 x 1,500 mm
Vacuum pump 250 m3/h
Pressure accumulator 500 l

Extraction:
1 central suction nozzle D 400 mm
Air volume at 30 m/s approx. 13,600 m3/h

Control: SINUMERIC 840 D Solution Line multi-channel technology

Feeding: KUKA robot

Linear axis, travel approx. 5,000 mm
Area gripper with suction carpet
Alignment and turning station
Feeding against stops lengthwise and sideways
Manual loading possible,
Working area max. 4,000 x 1,600 mm
Number of support carriers 2 x 2

Belt turning station
for automatic insertion of the hinges according to the programme,
The robot places the door leaf accurately in position on the turning station, the hinges are turned in,
then the door is stacked

Stacking system
1 outfeed and infeed roller conveyor
1 stacking station for door panels
4 stacking positions for finished doors

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

X stroke 7880 mm
Y stroke 2200 mm
Z stroke 380 mm
Axis nbr 5
Tool changer positions 40
Vacuum pump 250 m³/h
CNC type
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status visible
Client type Reseller
Active since 2017
Offers online 4
Last activity Oct. 26, 2023

Description

1 door cell for the production of room doors
Manufacturer: REICHENBACHER / KUKA
Type: Vision
year 2010 (commissioning 2011)

The machine is designed for:
-forming/rebating/floor groove/sealing groove
-lock processing with multiple locking/card lock/etc.
-tape processing, tape drilling, flap tape, tectus, tape side locking etc
-Floor groove
-Routing for door closer/opener/edge bolt
-Ornamental milling on both sides (in connection with door turning place and robot)
-light cut-outs/ventilation cut-outs/peephole etc

Travels:
X 7,880 mm
Y 2,200 mm
Z 380 mm

Traversing speeds: approx.
X 60 m/min
Y 90 m/min
Z 20 m/min

Number of 5-axis milling spindles 2
Speed 500 - 24,000 rpm
Rated power 15 kw S1 from approx. 12,000 rpm
Vibration monitoring system
Tool holder HSK 63 F
Tool length max. 240 mm
Tool diameter max. 200 mm (for sawing units 300 mm)
Tool weight max. 6 kg

Tool changer travelling in X
Handling system Double gripper
Number of tool positions 40
Tool centre distance 80 mm
Max. tool weight Total tool weight 160 kg

Table design
PIN table with adjustable crossbar at the back
Vacuum cups, individually controllable
Number 144
Diameter of vacuum cups 50 mm
2 work areas for alternate loading
with 2 units and quick change max. 2,200 x 1,500 mm
with 1 unit 3,000 x 1,500 mm
Vacuum pump 250 m3/h
Pressure accumulator 500 l

Extraction:
1 central suction nozzle D 400 mm
Air volume at 30 m/s approx. 13,600 m3/h

Control: SINUMERIC 840 D Solution Line multi-channel technology

Feeding: KUKA robot

Linear axis, travel approx. 5,000 mm
Area gripper with suction carpet
Alignment and turning station
Feeding against stops lengthwise and sideways
Manual loading possible,
Working area max. 4,000 x 1,600 mm
Number of support carriers 2 x 2

Belt turning station
for automatic insertion of the hinges according to the programme,
The robot places the door leaf accurately in position on the turning station, the hinges are turned in,
then the door is stacked

Stacking system
1 outfeed and infeed roller conveyor
1 stacking station for door panels
4 stacking positions for finished doors

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

X stroke 7880 mm
Y stroke 2200 mm
Z stroke 380 mm
Axis nbr 5
Tool changer positions 40
Vacuum pump 250 m³/h
CNC type
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status visible

About this seller

Client type Reseller
Active since 2017
Offers online 4
Last activity Oct. 26, 2023

Here is a selection of similar machines

Reichenbacher/Kuka Vision Wood CNC machining centre