Price on request
View price| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Last availability date | 10/06/2026 |
The Red-D-Arc RP10TS-FA-D1800 is a robust welding positioner designed to facilitate the precise positioning of workpieces through controlled tilt and rotation. It features a large circular table with a diameter of 1800 mm, capable of handling a turning capacity of 10 metric tonnes at a 300 mm load radius, as detailed in the load chart. The table is machined with four radial slots for anchor bolts and includes centric markings to assist with accurate placement.
The positioner is equipped with two sturdy columns that allow manual vertical height adjustment in 150 mm increments per slot, ranging from a minimum table height of 1350 mm up to a maximum of 1950 mm. Rotation is powered by a 4.0 kW AC motor controlled via an advanced inverter control box, which includes a remote pendant control with a 6-meter cable. This pendant control operates on a 24 VAC circuit and provides functions such as stop/start, forward/reverse, tilt, and variable speed control. Rotation speed ranges from 0.08 to 0.8 rpm.
Tilt movement is electrically driven by a 4.0 kW AC motor with dynamic braking through a reduction gearbox, allowing a tilt range from 0 to 135 degrees. The tilt speed is approximately 135 degrees in 110 seconds. Earth connections are maintained through a rotary earth clamp to ensure proper grounding to the welding power source.
The machine's input voltage is 415 V, 3-phase, 16 amps, 50 Hz; please specify voltage requirements when ordering. The positioner includes visible large gear segments and gear racks on either side for rotational and tilt movements. A mounted electric motor and a control box with wiring are attached to the side of the machine. The base frame is supported by wooden blocks, likely for stability or transport purposes.
The welding positioner is painted red and appears to be in good condition with no visible rust or damage, indicating it has been well maintained. This model is supplied with a 6-month warranty.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This welding Positioner Model RP10TS- FA-D1800 has a 10 metric tonne capacity designed to give a maximum positioning benefit by using tilt and rotation of the table for easy positioning of the workpiece.
Two robust columns permits the operator to adjust the vertical height manually in increments of 150 mm per slot/pitch to give a minimum table height of 1350mm up to maximum table height of 1950mm.
The table is machined with four radial slots for anchor bolts and centric marking on the table
It is powered driven by AC motor controlled by the latest inverter control box fitted with remote pendant control to provide stop/start, forward/reverse, tilt and variable speed control.
Tilt movement is electrically power driven by 4.0Kw AC motor with Dynamic Braking through the reduction gearbox.
Earth connections are made through a rotary earth clamp to ensure good earthing to the welding power source.
Table Size: Diameter of 1800mm
Pendant Control: 24VAC circuit, push button with 6m cable
Input voltage: 415 V/3 phase/16amps/50Hz (Specify voltage requirement when ordering)
Turning Capacity: 10-metric ton at 300mm (refer load chart)
Rotation Speed: 0.08 to 0.8rpm
Tilting Capacity: 10-metric ton at 300mm (refer load chart)
Tilt Range: 0 to 135 Degrees
Tilt Speed: 135 Degree at 110second,Rotation Drive Motor: 4.0 Kw motor,Rotation Drive Control: 4.0 Kw AC inverter,Tilt Drive Motor: 4.0 Kw c/w brake
Package Includes:
6 month warranty
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 187 |
| Last activity | June 15, 2026 |
This welding Positioner Model RP10TS- FA-D1800 has a 10 metric tonne capacity designed to give a maximum positioning benefit by using tilt and rotation of the table for easy positioning of the workpiece.
Two robust columns permits the operator to adjust the vertical height manually in increments of 150 mm per slot/pitch to give a minimum table height of 1350mm up to maximum table height of 1950mm.
The table is machined with four radial slots for anchor bolts and centric marking on the table
It is powered driven by AC motor controlled by the latest inverter control box fitted with remote pendant control to provide stop/start, forward/reverse, tilt and variable speed control.
Tilt movement is electrically power driven by 4.0Kw AC motor with Dynamic Braking through the reduction gearbox.
Earth connections are made through a rotary earth clamp to ensure good earthing to the welding power source.
Table Size: Diameter of 1800mm
Pendant Control: 24VAC circuit, push button with 6m cable
Input voltage: 415 V/3 phase/16amps/50Hz (Specify voltage requirement when ordering)
Turning Capacity: 10-metric ton at 300mm (refer load chart)
Rotation Speed: 0.08 to 0.8rpm
Tilting Capacity: 10-metric ton at 300mm (refer load chart)
Tilt Range: 0 to 135 Degrees
Tilt Speed: 135 Degree at 110second,Rotation Drive Motor: 4.0 Kw motor,Rotation Drive Control: 4.0 Kw AC inverter,Tilt Drive Motor: 4.0 Kw c/w brake
Package Includes:
6 month warranty
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Last availability date | 10/06/2026 |
The Red-D-Arc RP10TS-FA-D1800 is a robust welding positioner designed to facilitate the precise positioning of workpieces through controlled tilt and rotation. It features a large circular table with a diameter of 1800 mm, capable of handling a turning capacity of 10 metric tonnes at a 300 mm load radius, as detailed in the load chart. The table is machined with four radial slots for anchor bolts and includes centric markings to assist with accurate placement.
The positioner is equipped with two sturdy columns that allow manual vertical height adjustment in 150 mm increments per slot, ranging from a minimum table height of 1350 mm up to a maximum of 1950 mm. Rotation is powered by a 4.0 kW AC motor controlled via an advanced inverter control box, which includes a remote pendant control with a 6-meter cable. This pendant control operates on a 24 VAC circuit and provides functions such as stop/start, forward/reverse, tilt, and variable speed control. Rotation speed ranges from 0.08 to 0.8 rpm.
Tilt movement is electrically driven by a 4.0 kW AC motor with dynamic braking through a reduction gearbox, allowing a tilt range from 0 to 135 degrees. The tilt speed is approximately 135 degrees in 110 seconds. Earth connections are maintained through a rotary earth clamp to ensure proper grounding to the welding power source.
The machine's input voltage is 415 V, 3-phase, 16 amps, 50 Hz; please specify voltage requirements when ordering. The positioner includes visible large gear segments and gear racks on either side for rotational and tilt movements. A mounted electric motor and a control box with wiring are attached to the side of the machine. The base frame is supported by wooden blocks, likely for stability or transport purposes.
The welding positioner is painted red and appears to be in good condition with no visible rust or damage, indicating it has been well maintained. This model is supplied with a 6-month warranty.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 187 |
| Last activity | June 15, 2026 |
Позиции за заваряване Red-D-Arc RP10TS- FA-D1800
Svařovací polohovač Red-D-Arc RP10TS- FA-D1800
Red-D-Arc RP10TS- FA-D1800 Welding positioner
Red-D-Arc RP10TS- FA-D1800 Schweißpositionierer
Θέσεις συγκόλλησης Red-D-Arc RP10TS- FA-D1800
Red-D-Arc RP10TS- FA-D1800 Welding positioner
Posicionador de soldadura Red-D-Arc RP10TS- FA-D1800
Positionneur de soudage Red-D-Arc RP10TS- FA-D1800
Pozicije za zavarivanje Red-D-Arc RP10TS- FA-D1800
Red-D-Arc RP10TS- FA-D1800 Hegesztési pozíciók
Posizionatore di saldatura Red-D-Arc RP10TS- FA-D1800
Suvirinimo padėtys Red-D-Arc RP10TS- FA-D1800
Red-D-Arc RP10TS- FA-D1800 Lasposities
Spawarka punktowa Red-D-Arc RP10TS- FA-D1800
Posições de soldagem Red-D-Arc RP10TS- FA-D1800
Poziții de sudare Red-D-Arc RP10TS- FA-D1800
Red-D-Arc RP10TS- FA-D1800 Сварочный кантователь
Položaji zavarivanja Red-D-Arc RP10TS- FA-D1800
Red-D-Arc RP10TS- FA-D1800 Svetspositioner
Kaynak konumlandırıcı Red-D-Arc RP10TS- FA-D1800
EN
- Languages
English (GB)