Price on request
Make an offer| ------------------- | |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | visible |
| Last availability date | 04/06/2025 |
The RAS MiniBendCenter 79.05 is a tube bending machine manufactured in 2015, designed for precise bending operations. It features a robust construction with a total bending cell weight of approximately 10 tons, complemented by cladding and electrical components weighing around 2027 kg, and additional machine elements weighing about 945 kg. The machine operates on a 400V, 50/60 Hz, 3-phase power supply.
This model accommodates board lengths from 50 to 600 mm and board widths between 40 and 600 mm. It supports a maximum sheet thickness of 3.0 mm for materials with a tensile strength of 400 N/mm², depending on the tooling used. The upper cheek stroke can reach up to 500 mm, with leg heights varying from a standard minimum of 5 mm times sheet thickness to a maximum leg height of 127 mm.
Key features include automatic sheet thickness adjustment and automatic tool clamping within the bending cell, ensuring efficient and accurate bending processes. The machine is equipped with a blank scanner to enhance operational precision. The main manipulator utilizes three servomotors for X, Y, and Z-axis movements, along with one servomotor dedicated to the lower rotary axis and a separate drive for the rotary axis. It also incorporates double sheet detection for added safety and reliability.
The integrated tool changer is powered by three servomotors controlling X, Y, and Z movements, and a pneumatic swivel drive for the rotary axis. It includes a tool gripper and a two-level tool magazine with automatic tool clamping, facilitating rapid and versatile tooling changes.
The machine is housed in a white and orange protective casing featuring a glass door panel with a handle that provides access to the interior. Inside, an angled control panel with a screen, keypad, and emergency stop button is present for operator convenience. The exterior panels are intact with minor surface marks, and the interior components, including the robotic arm and hydraulic system with motor and tubing, appear clean and well-maintained with organized cables and hoses.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Refurbished RAS MiniBendCenter 79.05
Technical data
Board length: 50–600 mm
Board width: 40–600 mm
Sheet thickness max. (400 N/mm²) depending on tool: 3,0 mm
Upper cheek stroke max: 500 mm
Smallest leg height Standard value depends on tool: 5 mm x s
Maximum leg height: 127 mm
Weight of bending cell: 10 tons
Weight of cladding and electrics: ca. 2027 kg
Weight of machine elements: ca. 945 kg
Motor operation: 400V, 50/60 Hz, 3-Ph
Year of construction: 2015
Condition: refurbished—good used condition
Bending cell:
Automatic sheet thickness adjustment
Automatic tool clamping
Blank scanner
Main manipulator:
3 servomotors for X,Y,Z
1 servo motor for lower rotary axis + separate drive for rotary axis
Double sheet detection
Tool changer:
3 servomotors for X,Y,Z
1 pneum. Swivel drive for rotary axis
Tool gripper
Tool magazine on 2 levels
Automatic tool clamping in the tool magazine
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 178 |
| Last activity | June 11, 2026 |
Refurbished RAS MiniBendCenter 79.05
Technical data
Board length: 50–600 mm
Board width: 40–600 mm
Sheet thickness max. (400 N/mm²) depending on tool: 3,0 mm
Upper cheek stroke max: 500 mm
Smallest leg height Standard value depends on tool: 5 mm x s
Maximum leg height: 127 mm
Weight of bending cell: 10 tons
Weight of cladding and electrics: ca. 2027 kg
Weight of machine elements: ca. 945 kg
Motor operation: 400V, 50/60 Hz, 3-Ph
Year of construction: 2015
Condition: refurbished—good used condition
Bending cell:
Automatic sheet thickness adjustment
Automatic tool clamping
Blank scanner
Main manipulator:
3 servomotors for X,Y,Z
1 servo motor for lower rotary axis + separate drive for rotary axis
Double sheet detection
Tool changer:
3 servomotors for X,Y,Z
1 pneum. Swivel drive for rotary axis
Tool gripper
Tool magazine on 2 levels
Automatic tool clamping in the tool magazine
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| ------------------- | |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | visible |
| Last availability date | 04/06/2025 |
The RAS MiniBendCenter 79.05 is a tube bending machine manufactured in 2015, designed for precise bending operations. It features a robust construction with a total bending cell weight of approximately 10 tons, complemented by cladding and electrical components weighing around 2027 kg, and additional machine elements weighing about 945 kg. The machine operates on a 400V, 50/60 Hz, 3-phase power supply.
This model accommodates board lengths from 50 to 600 mm and board widths between 40 and 600 mm. It supports a maximum sheet thickness of 3.0 mm for materials with a tensile strength of 400 N/mm², depending on the tooling used. The upper cheek stroke can reach up to 500 mm, with leg heights varying from a standard minimum of 5 mm times sheet thickness to a maximum leg height of 127 mm.
Key features include automatic sheet thickness adjustment and automatic tool clamping within the bending cell, ensuring efficient and accurate bending processes. The machine is equipped with a blank scanner to enhance operational precision. The main manipulator utilizes three servomotors for X, Y, and Z-axis movements, along with one servomotor dedicated to the lower rotary axis and a separate drive for the rotary axis. It also incorporates double sheet detection for added safety and reliability.
The integrated tool changer is powered by three servomotors controlling X, Y, and Z movements, and a pneumatic swivel drive for the rotary axis. It includes a tool gripper and a two-level tool magazine with automatic tool clamping, facilitating rapid and versatile tooling changes.
The machine is housed in a white and orange protective casing featuring a glass door panel with a handle that provides access to the interior. Inside, an angled control panel with a screen, keypad, and emergency stop button is present for operator convenience. The exterior panels are intact with minor surface marks, and the interior components, including the robotic arm and hydraulic system with motor and tubing, appear clean and well-maintained with organized cables and hoses.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 178 |
| Last activity | June 11, 2026 |
Машина за огъване на тръби RAS MiniBendCenter 79.05
Ohýbačka trubek RAS MiniBendCenter 79.05
RAS MiniBendCenter 79.05 Rørbukkemaskine
RAS MiniBendCenter 79.05 Rohrbiegemaschine
Μηχανή κάμψης σωλήνων RAS MiniBendCenter 79.05
RAS MiniBendCenter 79.05 Tube bending machine
Curvadora de tubo RAS MiniBendCenter 79.05
Cintreuse de tubes RAS MiniBendCenter 79.05
Stroj za savijanje cijevi RAS MiniBendCenter 79.05
RAS MiniBendCenter 79.05 Csőhajlító gép
Piegatubi RAS MiniBendCenter 79.05
Vamzdžių lenkimo mašina RAS MiniBendCenter 79.05
RAS MiniBendCenter 79.05 Buigmachine voor buizen
Używana giętarka do rur RAS MiniBendCenter 79.05
Máquina dobradeira de tubos RAS MiniBendCenter 79.05
Mașină de îndoit țevi RAS MiniBendCenter 79.05
RAS MiniBendCenter 79.05 Трубогибочнй станок
Mašina za savijanje cevi RAS MiniBendCenter 79.05
RAS MiniBendCenter 79.05 Rörbockningsmaskin
Boru bükme makinası RAS MiniBendCenter 79.05
EN
- Languages
English (GB)