6,420 €
Make an offer| Working length | 1280 mm |
| Max. thickness | 3.5 mm |
| ------------------- | |
| Weight | 1180 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 05/05/2026 |
This is a CNC-controlled edge bending machine manufactured by RAS Germany-Reinhardt Maschinenebau GmbH, model 64.12. It is designed to handle steel sheets with a maximum bending length of 1280 mm and a maximum thickness of 3.5 mm (St40 steel). The machine allows setting the bending angle up to 28 degrees directly from the desktop, providing precise control over the bending process. The jaw opening measures 300 mm, accommodating various sheet thicknesses within the specified limit. It is powered by a 2.2 kW drive and has a total weight of approximately 1180 kg.
The machine's body is painted yellow and features black and yellow hazard stripes along the folding edge, enhancing safety by clearly marking the bending area. There is a warning sign with a hand symbol indicating a pinch hazard above the folding edge, emphasizing the need for caution during operation. The control panel is located on the right side of the machine and includes multiple buttons along with a red emergency stop button for quick shutdown in case of emergencies. Additionally, a hand crank or lever mechanism is situated near the folding edge on the right side, likely for manual adjustments.
The machine shows signs of wear consistent with prior use, including scratches and paint chipping on the yellow metal surfaces. Various metal parts and blades are included and are laid out on a wooden pallet in front of the machine; some of these parts exhibit surface rust and wear. A power cable with a red industrial plug is coiled on the ground next to the machine, indicating it is ready for connection to suitable power sources.
Full DTR documentation is provided with the machine, along with numerous additional tools and strips intended for flattening sheet metal, which may enhance operational versatility. The machine is currently situated on a tiled outdoor surface in front of a closed garage door.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
CNC-controlled edge bending machine, manufactured by RAS Germany-Reinhardt Maschinenebau GmbH type 64.12 - 1280 x 3.5 mm.
Thickness of bent steel sheet (St40) 3.5 mm; bending length 1280 mm.
Setting the bending angle up to 28 degrees from the desktop.
Jaw opening 300 mm.
2.2 kW drive.
Weight 1180 kg.
Full DTR documentation. Lots of additional tools, strips for flattening sheet metal.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2012 |
| Offers online | 69 |
| Last activity | June 10, 2026 |
CNC-controlled edge bending machine, manufactured by RAS Germany-Reinhardt Maschinenebau GmbH type 64.12 - 1280 x 3.5 mm.
Thickness of bent steel sheet (St40) 3.5 mm; bending length 1280 mm.
Setting the bending angle up to 28 degrees from the desktop.
Jaw opening 300 mm.
2.2 kW drive.
Weight 1180 kg.
Full DTR documentation. Lots of additional tools, strips for flattening sheet metal.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Working length | 1280 mm |
| Max. thickness | 3.5 mm |
| ------------------- | |
| Weight | 1180 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 05/05/2026 |
This is a CNC-controlled edge bending machine manufactured by RAS Germany-Reinhardt Maschinenebau GmbH, model 64.12. It is designed to handle steel sheets with a maximum bending length of 1280 mm and a maximum thickness of 3.5 mm (St40 steel). The machine allows setting the bending angle up to 28 degrees directly from the desktop, providing precise control over the bending process. The jaw opening measures 300 mm, accommodating various sheet thicknesses within the specified limit. It is powered by a 2.2 kW drive and has a total weight of approximately 1180 kg.
The machine's body is painted yellow and features black and yellow hazard stripes along the folding edge, enhancing safety by clearly marking the bending area. There is a warning sign with a hand symbol indicating a pinch hazard above the folding edge, emphasizing the need for caution during operation. The control panel is located on the right side of the machine and includes multiple buttons along with a red emergency stop button for quick shutdown in case of emergencies. Additionally, a hand crank or lever mechanism is situated near the folding edge on the right side, likely for manual adjustments.
The machine shows signs of wear consistent with prior use, including scratches and paint chipping on the yellow metal surfaces. Various metal parts and blades are included and are laid out on a wooden pallet in front of the machine; some of these parts exhibit surface rust and wear. A power cable with a red industrial plug is coiled on the ground next to the machine, indicating it is ready for connection to suitable power sources.
Full DTR documentation is provided with the machine, along with numerous additional tools and strips intended for flattening sheet metal, which may enhance operational versatility. The machine is currently situated on a tiled outdoor surface in front of a closed garage door.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2012 |
| Offers online | 69 |
| Last activity | June 10, 2026 |
Машина за сгъване RAS 64.12
Ohýbačka plechu RAS 64.12
RAS 64.12 Foldemaskine
RAS 64.12 Abkantmaschine
RAS 64.12 Πτυσσόμενη μηχανή
RAS 64.12 Folding machine
Plegadora manual RAS 64.12
Plieuse d'établi RAS 64.12
Stroj za savijanje RAS 64.12
Összecsukható gép RAS 64.12
Piegatrice RAS 64.12
RAS 64.12 Lankstymo mašina
Vouwmachine RAS 64.12
Używana zaginarka RAS 64.12
Máquina dobrável RAS 64.12
RAS 64.12 Mașină de pliat
RAS 64.12 Гибочный станок
RAS 64.12 Mašina za preklapanje
RAS 64.12 Vikmaskin
Bükme / Katlama makinesi RAS 64.12
EN
- Languages
English (GB)