50,000 €
Make an offerContact us to receive an offer.
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | under power |
| Last availability date | 19/01/2026 |
This industrial heating system, manufactured by Radyne, Inductotherm Group in 2012, is designed for efficient induction heating of steel wires. The unit is capable of heating 12 strands of steel wire, each with a diameter ranging from 1 mm to 2 mm, to an operating temperature of 700°C. The steel wire material should have a carbon content between 0.1% and 0.8%. The system maintains a wire spacing of 18 mm and can handle a minimum of 10 wire strands if needed. The input temperature is typically 20°C, with output temperatures regulated up to the Curie point of the material. Heating efficiency varies by wire diameter, with 5.5 kg/kWhr for 2 mm wires and 4.4 kg/kWhr for 1 mm wires.
The installation includes a mains transformer rated at 350 kVA and a high-frequency modular static inverter delivering an output power of 250 kW. The inductor is water-cooled and designed to accommodate twelve wires simultaneously. An inductor support with an adjustment system allows precise centering of the inductor on the wire, complemented by a compensation unit. The system features a closed cooling circuit with stainless steel plates, pumps, and a water tank to ensure consistent cooling of all components, including the induction coil.
Temperature control is managed via a dedicated system, and the connection chamber at the induction coil's end includes a removable cover and a port for the introduction of inert gas. A pyrometer monitors temperature across all 12 wires.
The equipment includes a blue control panel with multiple buttons, switches, dials, and meters labeled for kilowatts, kilohertz, and voltage. Safety features include multiple yellow warning labels and an emergency stop button with a safety key lock. The machine appears to be in good physical condition with no visible damage. A conveyor belt system is integrated into the oven, facilitating wire handling. Additionally, a large cooling or ventilation unit with metal mesh is part of the setup, supporting the closed cooling circuit.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Total installed power: 250 kW for heating 12 steel wires to 700° С. Material to be heated: steel wire with 0.1 - 0.8% C. Diameter: 1 mm - 2 mm. Number of wire strands: 12 (minimum 10). Wire spacing: 18 mm. Input temperature: 20°. Output temperature in operation: 700°C regulated. Output temperature - maximum: Curie point. Heating efficiency: 2 mm diameter: 5.5 kg/kWhr, 1 mm diameter 4.4 kg/kWhr. Year of manufacture: 2012
Consisting of the following units: 1 mains transformer 350 kVA; 1 high frequency modular static inverter, output power 250 kW; 1 inductor support with adjustment system to centre the inductor on the wire centre with compensation unit; inductor water cooled, for twelve wires with diameter 1.0-2.0 mm; control panel; closed cooling circuit system for all components (induction included) with stainless steel plates, stainless steel pumps and stainless steel water tank; temperature control system; connection chamber at the end of the induction coil with removable cover, the connection chamber has a connection for the introduction of inert gas; pyrometer for 12 wires.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Factory – small or medium company |
| Active since | 2023 |
| Offers online | 2 |
| Last activity | Sept. 13, 2025 |
Total installed power: 250 kW for heating 12 steel wires to 700° С. Material to be heated: steel wire with 0.1 - 0.8% C. Diameter: 1 mm - 2 mm. Number of wire strands: 12 (minimum 10). Wire spacing: 18 mm. Input temperature: 20°. Output temperature in operation: 700°C regulated. Output temperature - maximum: Curie point. Heating efficiency: 2 mm diameter: 5.5 kg/kWhr, 1 mm diameter 4.4 kg/kWhr. Year of manufacture: 2012
Consisting of the following units: 1 mains transformer 350 kVA; 1 high frequency modular static inverter, output power 250 kW; 1 inductor support with adjustment system to centre the inductor on the wire centre with compensation unit; inductor water cooled, for twelve wires with diameter 1.0-2.0 mm; control panel; closed cooling circuit system for all components (induction included) with stainless steel plates, stainless steel pumps and stainless steel water tank; temperature control system; connection chamber at the end of the induction coil with removable cover, the connection chamber has a connection for the introduction of inert gas; pyrometer for 12 wires.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | under power |
| Last availability date | 19/01/2026 |
This industrial heating system, manufactured by Radyne, Inductotherm Group in 2012, is designed for efficient induction heating of steel wires. The unit is capable of heating 12 strands of steel wire, each with a diameter ranging from 1 mm to 2 mm, to an operating temperature of 700°C. The steel wire material should have a carbon content between 0.1% and 0.8%. The system maintains a wire spacing of 18 mm and can handle a minimum of 10 wire strands if needed. The input temperature is typically 20°C, with output temperatures regulated up to the Curie point of the material. Heating efficiency varies by wire diameter, with 5.5 kg/kWhr for 2 mm wires and 4.4 kg/kWhr for 1 mm wires.
The installation includes a mains transformer rated at 350 kVA and a high-frequency modular static inverter delivering an output power of 250 kW. The inductor is water-cooled and designed to accommodate twelve wires simultaneously. An inductor support with an adjustment system allows precise centering of the inductor on the wire, complemented by a compensation unit. The system features a closed cooling circuit with stainless steel plates, pumps, and a water tank to ensure consistent cooling of all components, including the induction coil.
Temperature control is managed via a dedicated system, and the connection chamber at the induction coil's end includes a removable cover and a port for the introduction of inert gas. A pyrometer monitors temperature across all 12 wires.
The equipment includes a blue control panel with multiple buttons, switches, dials, and meters labeled for kilowatts, kilohertz, and voltage. Safety features include multiple yellow warning labels and an emergency stop button with a safety key lock. The machine appears to be in good physical condition with no visible damage. A conveyor belt system is integrated into the oven, facilitating wire handling. Additionally, a large cooling or ventilation unit with metal mesh is part of the setup, supporting the closed cooling circuit.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2023 |
| Offers online | 2 |
| Last activity | Sept. 13, 2025 |
Radyne, Inductotherm Group Induktion
Průmyslova pec Radyne, Inductotherm Group Induktion
Radyne, Inductotherm Group Induktion
Gebrauchte Induktive Ofen 250 kW für Drahterwärmung in Hagen
Radyne, Inductotherm Group Induktion
Used Radyne, Inductotherm Group Induktion Industrial oven
Horno industrial Radyne, Inductotherm Group Induktion
Four industriel Radyne, Inductotherm Group Induktion
Radyne, Inductotherm Group Induktion
Radyne, Inductotherm Group Induktion
Forno industriale Radyne, Inductotherm Group Induktion
Radyne, Inductotherm Group Induktion
Radyne, Inductotherm Group Induktion
Piec Radyne, Inductotherm Group Induktion
Radyne, Inductotherm Group Induktion
Radyne, Inductotherm Group Induktion
Radyne, Inductotherm Group Induktion
Radyne, Inductotherm Group Induktion
Radyne, Inductotherm Group Induktion
Endüsriyel fırın Radyne, Inductotherm Group Induktion
EN
- Languages
English (GB)