Price on request
View priceContact us to receive an offer.
| Power | 5800 W |
| Option to cut tubes | no |
| CNC | no |
| CNC type | |
| ------------------- | |
| Length x width x height | 1500.0 × 1200.0 × 1850.0 |
| Weight | 750 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | visible |
| Last availability date | 29/04/2026 |
The Pulsar Photonics RDX 500 is an ultrashort pulse (UKP) picosecond laser cutting machine designed for precision industrial micro-processing tasks. It operates with a pulse duration of 10 picoseconds and emits a green laser wavelength at 532 nm. The system offers an average power output of less than 20 watts and supports a repetition rate range from 100 kHz up to 20 MHz. This laser system is classified as Laser Protection Class 1, ensuring safe operation under standard conditions.
The RDX 500 features 2.5 processing axes, including X and Y machining axes plus a Z-axis for focus and depth adjustment, allowing for versatile and precise material processing within a minimum processing field of 210 mm by 290 mm. The machine utilizes a 2D galvanometer scanner equipped with a Newson Scanner-Controller A2G_CUA01 and an F-Theta lens for accurate beam delivery.
Control of the system is managed via Windows 7-based software, Photonic Elements, which integrates scanner, camera, laser, and axis control, along with CAD-CAM import and live imaging capabilities. Job preparation is supported through Rhinoceros 5.0 software with the PhotonicVectors plugin.
Physically, the machine measures 1,500 mm in length, 1,200 mm in width, and 1,850 mm in height, with a weight of approximately 750 kg. It requires a 400 V power supply at 5.8 kW.
The machine is equipped with an attached computer monitor, keyboard, and control panel featuring start, emergency stop, and key switch controls, facilitating user operation. A white auxiliary unit labeled "ULT UMWELT-LUFTTECHNIK" is connected to the system via hoses, likely serving ventilation or environmental control functions. Ventilation ducts are installed above the machine, and power and data cables are neatly connected at the rear lower side.
The exterior of the laser cutting machine, which bears the Pulsar Photonics branding and a distinctive black and yellow casing, appears well maintained with no visible damage or wear. The surrounding area and connection points are clean and orderly, indicating careful upkeep.
This used machine is offered as-is and is available for demonstration by appointment in Cologne.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
The Pulsar Photonics RDX 500 is a high-precision ultrashort pulse (UKP) picosecond laser system designed for industrial micro-processing applications. The machine is in used but fully operational condition with very low utilization (barely used)
--- LASER SPECIFICATIONS ---
- Laser type: Ultrashort pulse laser (UKP / Picosecond)
- Pulse duration: 10 ps
- Wavelength: 532 nm (green)
- Average power: < 20 W
- Repetition rate: 100 kHz – 20 MHz
- Laser protection class: Class 1
- Laser serial number: SN0702
--- MACHINE & MOTION ---
- Machine serial number: RDX-500-071501
- Processing axes: 2.5 axes (X/Y machining + Z-axis for focus/depth adjustment)
- Processing field: min. 210 mm x 290 mm
- Scanner unit: 2D galvanometer scanner with Newson Scanner-Controller A2G_CUA01 incl. F-Theta lens
--- SOFTWARE & CONTROL ---
- Control software: Windows 7 with Photonic Elements (scanner, camera, laser & axis control; CAD-CAM import, live image)
- CAM software: Rhinoceros 5.0 incl. PhotonicVectors plugin (job preparation)
--- ELECTRICAL & DIMENSIONS ---
- Power supply: 400 V / 5.8 kW
- Dimensions (L x W x H): 1,500 x 1,200 x 1,850 mm
- Weight: approx. 750 kg
--- SALE INFORMATION ---
- Condition: Used – fully operational, very low utilization
- Demonstrable: Yes – Cologne, by appointment
- Sale basis: As-is / As-seen
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | April 29, 2026 |
The Pulsar Photonics RDX 500 is a high-precision ultrashort pulse (UKP) picosecond laser system designed for industrial micro-processing applications. The machine is in used but fully operational condition with very low utilization (barely used)
--- LASER SPECIFICATIONS ---
- Laser type: Ultrashort pulse laser (UKP / Picosecond)
- Pulse duration: 10 ps
- Wavelength: 532 nm (green)
- Average power: < 20 W
- Repetition rate: 100 kHz – 20 MHz
- Laser protection class: Class 1
- Laser serial number: SN0702
--- MACHINE & MOTION ---
- Machine serial number: RDX-500-071501
- Processing axes: 2.5 axes (X/Y machining + Z-axis for focus/depth adjustment)
- Processing field: min. 210 mm x 290 mm
- Scanner unit: 2D galvanometer scanner with Newson Scanner-Controller A2G_CUA01 incl. F-Theta lens
--- SOFTWARE & CONTROL ---
- Control software: Windows 7 with Photonic Elements (scanner, camera, laser & axis control; CAD-CAM import, live image)
- CAM software: Rhinoceros 5.0 incl. PhotonicVectors plugin (job preparation)
--- ELECTRICAL & DIMENSIONS ---
- Power supply: 400 V / 5.8 kW
- Dimensions (L x W x H): 1,500 x 1,200 x 1,850 mm
- Weight: approx. 750 kg
--- SALE INFORMATION ---
- Condition: Used – fully operational, very low utilization
- Demonstrable: Yes – Cologne, by appointment
- Sale basis: As-is / As-seen
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Power | 5800 W |
| Option to cut tubes | no |
| CNC | no |
| CNC type | |
| ------------------- | |
| Length x width x height | 1500.0 × 1200.0 × 1850.0 |
| Weight | 750 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | visible |
| Last availability date | 29/04/2026 |
The Pulsar Photonics RDX 500 is an ultrashort pulse (UKP) picosecond laser cutting machine designed for precision industrial micro-processing tasks. It operates with a pulse duration of 10 picoseconds and emits a green laser wavelength at 532 nm. The system offers an average power output of less than 20 watts and supports a repetition rate range from 100 kHz up to 20 MHz. This laser system is classified as Laser Protection Class 1, ensuring safe operation under standard conditions.
The RDX 500 features 2.5 processing axes, including X and Y machining axes plus a Z-axis for focus and depth adjustment, allowing for versatile and precise material processing within a minimum processing field of 210 mm by 290 mm. The machine utilizes a 2D galvanometer scanner equipped with a Newson Scanner-Controller A2G_CUA01 and an F-Theta lens for accurate beam delivery.
Control of the system is managed via Windows 7-based software, Photonic Elements, which integrates scanner, camera, laser, and axis control, along with CAD-CAM import and live imaging capabilities. Job preparation is supported through Rhinoceros 5.0 software with the PhotonicVectors plugin.
Physically, the machine measures 1,500 mm in length, 1,200 mm in width, and 1,850 mm in height, with a weight of approximately 750 kg. It requires a 400 V power supply at 5.8 kW.
The machine is equipped with an attached computer monitor, keyboard, and control panel featuring start, emergency stop, and key switch controls, facilitating user operation. A white auxiliary unit labeled "ULT UMWELT-LUFTTECHNIK" is connected to the system via hoses, likely serving ventilation or environmental control functions. Ventilation ducts are installed above the machine, and power and data cables are neatly connected at the rear lower side.
The exterior of the laser cutting machine, which bears the Pulsar Photonics branding and a distinctive black and yellow casing, appears well maintained with no visible damage or wear. The surrounding area and connection points are clean and orderly, indicating careful upkeep.
This used machine is offered as-is and is available for demonstration by appointment in Cologne.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | April 29, 2026 |
Високопрецизна машина за лазерно рязане Pulsar Photonics RDX 500 с МАЛКО РАБОТНИ ЧАСОВЕ
Vysoce přesný laserový řezací stroj Pulsar Photonics RDX 500 – jen několik provozních hodin
Pulsar Photonics RDX 500 højpræcisionslaserskæremaskine – FÅ DRIFTSTIMER
Pulsar Photonics RDX 500 – hochpräzise Laserschneidemaschine – nur wenige Betriebsstunden
Μηχανή κοπής με λέιζερ υψηλής ακρίβειας Pulsar Photonics RDX 500 – Λίγες ώρες λειτουργίας
Pulsar Photonics RDX 500 high-precision Laser cutting machine FEW WORKING HOURS
Máquina de corte por láser de alta precisión Pulsar Photonics RDX 500. POCAS HORAS DE FUNCIONAMIENTO
Machine de découpe laser haute précision Pulsar Photonics RDX 500 – PEU D'HEURES DE FONCTIONNEMENT
Pulsar Photonics RDX 500 visokotočna laserska reznica, malo radnih sati
Pulsar Photonics RDX 500 nagy pontosságú lézervágó gép, alig használt
Macchina per il taglio laser ad alta precisione Pulsar Photonics RDX 500 – POCHISSIME ORE DI FUNZIONAMENTO
„Pulsar Photonics“ RDX 500 – itin tikslus lazerinis pjovimo staklės, dirbusios tik keletą valandų
Pulsar Photonics RDX 500: uiterst nauwkeurige lasersnijmachine, WEINIG GEBRUIKT
Wysokoprecyzyjna wycinarka laserowa Pulsar Photonics RDX 500 – NISKI STAN PRACY
Máquina de corte a laser de alta precisão Pulsar Photonics RDX 500 COM POUCAS HORAS DE FUNCIONAMENTO
Mașină de tăiat cu laser de înaltă precizie Pulsar Photonics RDX 500, cu puține ore de funcționare
Высокоточный лазерный резак Pulsar Photonics RDX 500 с небольшим наработкой
Pulsar Fotoniks RDX 500 visokoprecizna mašina za lasersko sečenje, nekoliko radnih sati
Pulsar Photonics RDX 500 – högprecisionslaserskärmaskin med få driftstimmar
Pulsar Photonics RDX 500 yüksek hassasiyetli lazer kesim makinesi, çok az çalışmış
EN
- Languages
English (GB)