The PRIMA POWER PLATINO 1530 laser cutter was built by the Italian company Prima Power in 2012. It has a Primach 20L CNC control and a Rofin Sinar DC 025 CO2 laser with a power of 2.5 kW and a wavelength of 10.6 um. The laser cutter allows you to cut sheet metal with the maximum dimensions of 3000 x 1500 mm, 15 mm thick and weighing 250 kg. The laser gas consists of He, CO2 and N2. In addition, the equipment includes, among others, the Water Chiller HYFRA svk 320-1-s, as well as the Donaldson Torit DCE dedusting system.

Technical parameters of the PRIMA POWER PLATINO 1530 laser cutter

- machine time worked: 24800 hours
- power: 2500.0 W
- CNC control: Primach 20L
- X travel: 3000.0 mm
- Y travel: 1500.0 mm
- working area: 3000 x 1500 mm
- maximum sheet length: 3000.0 mm
- maximum sheet width: 1500.0 mm
- maximum sheet thickness: 15.0 mm
- maximum load on the table: 250.0 kg
- machine length x width x height: 12000.0 mm × 6000.0 mm × 3000.0 mm
- machine weight: 12000.0 kg

Rofin Sinar DC 025 CO2 laser specification

- type: CO₂
- laser: Rofin Sinar DC 025
- power: 2,500 Watt
- power stability: + -2% FS
- wavelength: 10.6 µm
- gas type: He 67.7%; CO2 4.1%; N2 28.2%
- beam propagation factor M2: 250 microseconds, 70 used resolutions
- positioning accuracy: + -150 radians
- operating conditions: maximum / minimum ambient temperature 40 degrees C / 10 degrees C
- relative humidity: <95% non-condensing
- diode laser wavelength: 635 nanometers
- diode laser output power: <1 milliwatt

Cooling:
- required cooling capacity: 31 kW
- Flow Rate: 133 LPM (35 GPM)
- inlet temperature: 18 - 20 degrees C
- maximum inlet pressure: 6 Bar
- nominal inlet pressure: 3 Bar
- pressure difference: 2 Bar
- liquid: distilled water
- filter requirements: 100 microns

Connections:
- water: hose connector 1.25 "
- gas inlet: 6mm tube nipple
- exhaust: 0.5 "pipe nipple
- drain: pipe connector 8 mm 8

CO2 laser dimensions and weight:
- width: 850 mm
- height: 887 mm
- length: 2551 mm
- weight: 1140 kg

Additional parameters and accessories of the PRIMA POWER PLATINO 1530 laser
- compliance with CE standards
- protective cabin
- light barrier
- CE safety
- Water Chiller HYFRA svk 320-1-s
- Donaldson Torit DCE dedusting system

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Metal length 3000 mm
Power 2500 W
Metal width 1500 mm
Type CO₂
Option to cut tubes no
Max thickness 15 mm
CNC yes
CNC type Primach 20L
Travel X 3000 mm
Travel Y 1500 mm
Max weight of the workpiece 250 kg
-------------------
Length x width x height 12000.0 × 6000.0 × 3000.0
Weight 12000 kg
Worked hours 24800 hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2010
Offers online 377
Last activity March 28, 2024

Description

The PRIMA POWER PLATINO 1530 laser cutter was built by the Italian company Prima Power in 2012. It has a Primach 20L CNC control and a Rofin Sinar DC 025 CO2 laser with a power of 2.5 kW and a wavelength of 10.6 um. The laser cutter allows you to cut sheet metal with the maximum dimensions of 3000 x 1500 mm, 15 mm thick and weighing 250 kg. The laser gas consists of He, CO2 and N2. In addition, the equipment includes, among others, the Water Chiller HYFRA svk 320-1-s, as well as the Donaldson Torit DCE dedusting system.

Technical parameters of the PRIMA POWER PLATINO 1530 laser cutter

- machine time worked: 24800 hours
- power: 2500.0 W
- CNC control: Primach 20L
- X travel: 3000.0 mm
- Y travel: 1500.0 mm
- working area: 3000 x 1500 mm
- maximum sheet length: 3000.0 mm
- maximum sheet width: 1500.0 mm
- maximum sheet thickness: 15.0 mm
- maximum load on the table: 250.0 kg
- machine length x width x height: 12000.0 mm × 6000.0 mm × 3000.0 mm
- machine weight: 12000.0 kg

Rofin Sinar DC 025 CO2 laser specification

- type: CO₂
- laser: Rofin Sinar DC 025
- power: 2,500 Watt
- power stability: + -2% FS
- wavelength: 10.6 µm
- gas type: He 67.7%; CO2 4.1%; N2 28.2%
- beam propagation factor M2: 250 microseconds, 70 used resolutions
- positioning accuracy: + -150 radians
- operating conditions: maximum / minimum ambient temperature 40 degrees C / 10 degrees C
- relative humidity: <95% non-condensing
- diode laser wavelength: 635 nanometers
- diode laser output power: <1 milliwatt

Cooling:
- required cooling capacity: 31 kW
- Flow Rate: 133 LPM (35 GPM)
- inlet temperature: 18 - 20 degrees C
- maximum inlet pressure: 6 Bar
- nominal inlet pressure: 3 Bar
- pressure difference: 2 Bar
- liquid: distilled water
- filter requirements: 100 microns

Connections:
- water: hose connector 1.25 "
- gas inlet: 6mm tube nipple
- exhaust: 0.5 "pipe nipple
- drain: pipe connector 8 mm 8

CO2 laser dimensions and weight:
- width: 850 mm
- height: 887 mm
- length: 2551 mm
- weight: 1140 kg

Additional parameters and accessories of the PRIMA POWER PLATINO 1530 laser
- compliance with CE standards
- protective cabin
- light barrier
- CE safety
- Water Chiller HYFRA svk 320-1-s
- Donaldson Torit DCE dedusting system

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Metal length 3000 mm
Power 2500 W
Metal width 1500 mm
Type CO₂
Option to cut tubes no
Max thickness 15 mm
CNC yes
CNC type Primach 20L
Travel X 3000 mm
Travel Y 1500 mm
Max weight of the workpiece 250 kg
-------------------
Length x width x height 12000.0 × 6000.0 × 3000.0
Weight 12000 kg
Worked hours 24800 hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2010
Offers online 377
Last activity March 28, 2024

Here is a selection of similar machines

Prima Power Platino 1530 laser cutting machine